Fibre break models for designing novel composite microstructures and applications

Informacje na temat projektu

FiBreMoD

Identyfikator umowy o grant: 722626

DOI

10.3030/722626

Projekt został zamknięty

Data podpisania przez KE 16 Sierpnia 2016

Data rozpoczęcia 1 Października 2016

Data zakończenia 30 Września 2020

Finansowanie w ramach

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Koszt całkowity

€ 3 370 807,44

Wkład UE

€ 3 370 807,44

Koordynowany przez

KATHOLIEKE UNIVERSITEIT LEUVEN
Belgium

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Documents, reports (3)

Best practices for measuring matrix, fibre and interfacial properties

Report describing best practices for measuring matrix, fibre and interfacial properties

The effect of voids on the mechanical properties of carbon fibre reinforced composites
Instructions for participants in the benchmarking exercise

Open Research Data Pilot (1)

Publication of the results of the benchmarking exercise

Websites, patent fillings, videos etc. (1)

Website up and running

Publikacje

Peer reviewed articles (27)

The influence of 3D microstructural features on the elastic behaviour of tow-based discontinuous composites

Autorzy: Marco Alves, Soraia Pimenta
Opublikowane w: Composite Structures, Numer 251, 2020, Strona(/y) 112484, ISSN 0263-8223
Wydawca: Elsevier BV
DOI: 10.1016/j.compstruct.2020.112484

Ultra-strong and stiff randomly-oriented discontinuous composites: Closing the gap to quasi-isotropic continuous-fibre laminates

Autorzy: M. Alves, D. Carlstedt, F. Ohlsson, L.E. Asp, S. Pimenta
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 132, 2020, Strona(/y) 105826, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.105826

A novel particle-filled carbon-fibre reinforced polymer model composite tailored for the application of digital volume correlation and computed tomography

Autorzy: E Schöberl, C Breite, S Rosini, Y Swolfs, MN Mavrogordato, I Sinclair, SM Spearing
Opublikowane w: Journal of Composite Materials, Numer -, 2021, Strona(/y) 002199832096638, ISSN 0021-9983
Wydawca: SAGE Publications
DOI: 10.1177/0021998320966388

Realising bio-inspired impact damage-tolerant thin-ply CFRP Bouligand structures via promoting diffused sub-critical helicoidal damage

Autorzy: Lorenzo Mencattelli, Silvestre T. Pinho
Opublikowane w: Composites Science and Technology, Numer 182, 2019, Strona(/y) 107684, ISSN 0266-3538
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2019.107684

Micro-CT based structure tensor analysis of fibre orientation in random fibre composites versus high-fidelity fibre identification methods

Autorzy: Radmir Karamov, Luca M. Martulli, Martin Kerschbaum, Ivan Sergeichev, Yentl Swolfs, Stepan V. Lomov
Opublikowane w: Composite Structures, Numer 235, 2020, Strona(/y) 111818, ISSN 0263-8223
Wydawca: Elsevier BV
DOI: 10.1016/j.compstruct.2019.111818

Ultra-thin-ply CFRP Bouligand bio-inspired structures with enhanced load-bearing capacity, delayed catastrophic failure and high energy dissipation capability

Autorzy: Lorenzo Mencattelli, Silvestre T. Pinho
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 129, 2020, Strona(/y) 105655, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105655

Uncertainty in Fibre Strength Characterisation Due to Uncertainty in Measurement and Sampling Randomness

Autorzy: Sébastien Joannès, Faisal Islam, Lucien Laiarinandrasana
Opublikowane w: Applied Composite Materials, Numer 27/3, 2020, Strona(/y) 165-184, ISSN 0929-189X
Wydawca: Kluwer Academic Publishers
DOI: 10.1007/s10443-020-09803-9

Combining digital image correlation with X-ray computed tomography for characterization of fiber orientation in unidirectional composites

Autorzy: Mahoor Mehdikhani, Christian Breite, Yentl Swolfs, Martine Wevers, Stepan V. Lomov, Larissa Gorbatikh
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 142, 2021, Strona(/y) 106234, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.106234

Carbon fibre sheet moulding compounds with high in-mould flow: Linking morphology to tensile and compressive properties

Autorzy: Luca M. Martulli, Leen Muyshondt, Martin Kerschbaum, Soraia Pimenta, Stepan V. Lomov, Yentl Swolfs
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 126, 2019, Strona(/y) 105600, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105600

Hybrid Effect in In-Plane Loading of Carbon/Glass Fibre Based Inter- and Intraply Hybrid Composites

Autorzy: Ashok Rajpurohit, Sébastien Joannès, Vicky Singery, Philippe Sanial, Lucien Laiarinandrasana
Opublikowane w: Journal of Composites Science, Numer 4/1, 2020, Strona(/y) 6, ISSN 2504-477X
Wydawca: MDPI
DOI: 10.3390/jcs4010006

A thick-walled sheet moulding compound automotive component: Manufacturing and performance

Autorzy: L.M. Martulli, Thomas Creemers, Erich Schöberl, Nicholas Hale, Martin Kerschbaum, Stepan V. Lomov, Yentl Swolfs
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 128, 2020, Strona(/y) 105688, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105688

Herringbone-Bouligand CFRP structures: A new tailorable damage-tolerant solution for damage containment and reduced delaminations

Autorzy: Lorenzo Mencattelli, Silvestre T. Pinho
Opublikowane w: Composites Science and Technology, Numer 190, 2020, Strona(/y) 108047, ISSN 0266-3538
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2020.108047

Morphology-induced fatigue crack arresting in carbon fibre sheet moulding compounds

Autorzy: Luca M. Martulli, Leen Muyshondt, Martin Kerschbaum, Soraia Pimenta, Stepan V. Lomov, Yentl Swolfs
Opublikowane w: International Journal of Fatigue, Numer 134, 2020, Strona(/y) 105510, ISSN 0142-1123
Wydawca: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105510

Bio-inspired design for enhanced damage tolerance of self-reinforced polypropylene/carbon fibre polypropylene hybrid composites

Autorzy: Lorenzo Mencattelli, Jun Tang, Yentl Swolfs, Larissa Gorbatikh, Silvestre T. Pinho
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 121, 2019, Strona(/y) 341-352, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.03.028

Microscale material variability and its effect on longitudinal tensile failure of unidirectional carbon fibre composites

Autorzy: Fabio Malgioglio, Soraia Pimenta, Anna Matveeva, Laszlo Farkas, Wim Desmet, Stepan V. Lomov, Yentl Swolfs
Opublikowane w: Composite Structures, Numer 261, 2021, Strona(/y) 113300, ISSN 0263-8223
Wydawca: Elsevier BV
DOI: 10.1016/j.compstruct.2020.113300

Ply fragmentation in unidirectional hybrid composites linked to stochastic fibre behaviour: A dual-scale model

Autorzy: Francisco Mesquita, Yentl Swolfs, Stepan V. Lomov, Larissa Gorbatikh
Opublikowane w: Composites Science and Technology, Numer 181, 2019, Strona(/y) 107702, ISSN 0266-3538
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2019.107702

Fibre-direction strain measurement in a composite ply under quasi-static tensile loading using Digital Volume Correlation and in situ Synchrotron Radiation Computed Tomography

Autorzy: E. Schöberl, C. Breite, A. Melnikov, Y. Swolfs, M.N. Mavrogordato, I. Sinclair, S.M. Spearing
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 137, 2020, Strona(/y) 105935, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.105935

A computationally-efficient micromechanical model for the fatigue life of unidirectional composites under tension-tension loading

Autorzy: Marco Alves, Soraia Pimenta
Opublikowane w: International Journal of Fatigue, Numer 116, 2018, Strona(/y) 677-690, ISSN 0142-1123
Wydawca: Elsevier BV
DOI: 10.1016/j.ijfatigue.2018.05.017

Multi-instrument multi-scale experimental damage mechanics for fibre reinforced composites

Autorzy: Stepan V Lomov, Christian Breite, Delphine Carrella-Payan, Valter Carvelli, Nuri Ersoy, Marco Gigliotti, Raquel Antoranz Gonzalez, Sergey Ivanov, Malika Kersani, Marie-Christine Lafarie-Frenot, Mark Mavrogordato, Mahoor Mehdikhani, Arsen Melnikov, Francisco Mesquita, Fatih Oz, Yannick Pannier, Lincy Pyl, Erich Schöberl, Ian Sinclair, S Mark Spearing, Yentl Swolfs, Danny Van Hemelrijk, Man Zhu, La
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 406, 2018, Strona(/y) 012057, ISSN 1757-899X
Wydawca: IOP Publishing
DOI: 10.1088/1757-899X/406/1/012057

Fibre direction strain measurement in a composite ply under pure bending using Digital Volume Correlation and Micro-focus Computed Tomography

Autorzy: Erich Schöberl, MN Mavrogordato, I Sinclair, SM Spearing
Opublikowane w: Journal of Composite Materials, Numer 54/14, 2020, Strona(/y) 1889-1912, ISSN 0021-9983
Wydawca: SAGE Publications
DOI: 10.1177/0021998320918648

Void growth measurement and modelling in a thermosetting epoxy resin using SEM and tomography techniques

Autorzy: Jan Rojek, Christian Breite, Yentl Swolfs, Lucien Laiarinandrasana
Opublikowane w: Continuum Mechanics and Thermodynamics, Numer 32/2, 2020, Strona(/y) 471-488, ISSN 0935-1175
Wydawca: Springer Verlag
DOI: 10.1007/s00161-020-00865-5

A dataset of micro-scale tomograms of unidirectional glass fiber/epoxy and carbon fiber/epoxy composites acquired via synchrotron computed tomography during in-situ tensile loading

Autorzy: Mahoor Mehdikhani, Christian Breite, Yentl Swolfs, Martine Wevers, Stepan V. Lomov, Larissa Gorbatikh
Opublikowane w: Data in Brief, Numer 34, 2021, Strona(/y) 106672, ISSN 2352-3409
Wydawca: Elsevier BV
DOI: 10.1016/j.dib.2020.106672

Weld lines in tow-based sheet moulding compounds tensile properties: Morphological detrimental factors

Autorzy: L.M. Martulli, Martin Kerschbaum, Stepan V. Lomov, Yentl Swolfs
Opublikowane w: Composites Part A: Applied Science and Manufacturing, Numer 139, 2020, Strona(/y) 106109, ISSN 1359-835X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.106109

Engineering tensile behavior of hybrid carbon fiber/self-reinforced polypropylene composites by bio-inspired fiber discontinuities

Autorzy: Jun Tang, Yentl Swolfs, Arya Aslani, Lorenzo Mencattelli, Gianmaria Bullegas, Silvestre T. Pinho, Stepan V. Lomov, Larissa Gorbatikh
Opublikowane w: Composites Part B: Engineering, Numer 178, 2019, Strona(/y) 107502, ISSN 1359-8368
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2019.107502

Blind benchmarking of seven longitudinal tensile failure models for two virtual unidirectional composites

Autorzy: C. Breite, A. Melnikov, A. Turon, A.B. de Morais, F. Otero, F. Mesquita, J. Costa, J.A. Mayugo, J.M. Guerrero, L. Gorbatikh, L.N. McCartney, M. Hajikazemi, P.P. Camanho, R.P. Tavares, S.V. Lomov, S. Pimenta, W. Van Paepegem, Y. Swolfs
Opublikowane w: Composites Science and Technology, Numer 202, 2021, Strona(/y) 108555, ISSN 0266-3538
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2020.108555

Investigation of tensile strength and dimensional variation of T700 carbon fibres using an improved experimental setup

Autorzy: Faisal Islam, Sébastien Joannès, Steve Bucknell, Yann Leray, Anthony Bunsell, Lucien Laiarinandrasana
Opublikowane w: Journal of Reinforced Plastics and Composites, Numer 39/3-4, 2020, Strona(/y) 144-162, ISSN 0731-6844
Wydawca: SAGE Publications
DOI: 10.1177/0731684419873712

State-of-the-art models for mechanical performance of carbon-glass hybrid composites in wind turbine blades

Autorzy: Yentl Swolfs, Babak Fazlali, Arsen Melnikov, Francisco Mesquita, Vincent Feyen, Christian Breite, Larissa Gorbatikh, Stepan V Lomov
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 942, 2020, Strona(/y) 012005, ISSN 1757-899X
Wydawca: IOP Publishing
DOI: 10.1088/1757-899x/942/1/012005

Thesis and dissertations (1)

Effet de la porosité dans les réservoirs composites à parois épaisses : Observations expérimentales et modélisation numérique

Autorzy: Rojek, Jan
Opublikowane w: "Mechanics of materials [physics.class-ph]. English. ⟨NNT : 2020UPSLM015⟩", Numer 11, 2020
Wydawca: Université Paris sciences et lettres

Conference proceedings (27)

Direct Comparison of the Fibre Break Development in Unidirectional Carbon Fibre Composites Under Tension Predicted by Statistical Models and Measured Using 4D In-situ SRCT

Autorzy: CHRISTIAN BREITE, ARSEN MELNIKOV, FRANCISCO MESQUITA, LARISSA GORBATIKH, STEPAN V. LOMOV, YENTL SWOLFS
Opublikowane w: American Society for Composites 2020, Numer proceedings of the American Society for Composites 2020, 2020, ISBN 978-1-60595-665-7
Wydawca: DEStech Publications, Inc.
DOI: 10.12783/asc35/34971

Improvements in Determination of Carbon Fibre Strength Distribution Using Automation and Statistical Data

Autorzy: Islam, Faisal; Bucknell, Steve; Leray, Yann; Bunsell, Anthony; Laiarinandrasana, Lucien; Joannès, Sébastien
Opublikowane w: Fiber Society's Spring 2018 Conference, Numer Jun 2018, 2018
Wydawca: The Fiber society

Effect of through-thickness compressive stress and porosity on the tensile strength of carbon-fibre reinforced composites

Autorzy: Rojek, Jan; Joannès, Sébastien; Teissedre, Jean-Christophe; Laiarinandrasana, Lucien; Bunsell, Anthony
Opublikowane w: ICCM 22 - 22nd International Conference on Composite Materials, Numer Aug 2019,, 2019
Wydawca: ICCM22 (digital)

Manufacturing and performance of hybrid fabric reinforcements and their composites

Autorzy: Rajpurohit, Ashok; Singery, Vicky; Joannès, Sébastien; Sanial, Philippe; Laiarinandrasana, Lucien
Opublikowane w: ECCM 18 - 18th European Conference on Composite Materials, Numer Jun 2018, 2018, Strona(/y) 8
Wydawca: ECCM18

Effect of the time-dependent load on type IV cylinders using a multi-scale model

Autorzy: Widjaja MP, Alves M, Mavrogordato M, Joannès S, Bunsell A, Mair GW, and Thionnet A
Opublikowane w: Proceeding of the Proceeding of the 8th International Conference on Hydrogen Safety (ICHS 8), Numer September 2019, 2019
Wydawca: ICHS 8

Modelling an Improved NOL Ring Test Using a Reduced Volume Method for the Characterisation of Composite Cylinders

Autorzy: Widjaja, Martinus P.; Joannès, Sébastien; Bunsell, Anthony R.; Mair, Georg; Thionnet, Alain
Opublikowane w: ICCM 22 - 22nd International Conference on Composite Materials, Numer Aug 2019, 2019
Wydawca: ICCM22 9digital0

Mapping strains and fibre fracture in carbon fibre composites using in situ digital volume correlation

Autorzy: Schöberl E, Breite C, Melnikov A, Swolfs Y, Mavrogordato MN, Sinclair I
Opublikowane w: Proceedings of the 22nd International conference on Composite Materials (ICCM-22), Numer August 2019, 2019
Wydawca: ICCM22 (digital)

Effect of input properties on the predicted failure of a composite pressure vessel using a multiscale model

Autorzy: Widjaja, Martinus,; Islam, Faisal; Joannès, Sébastien; Bunsell, Anthony; Mair, G.; Thionnet, Alain
Opublikowane w: FiBreMoD Conference, KU Leuven, Numer Dec 2019, 2019
Wydawca: FiBreMoD (digital)

Predictions of carbon fibre sheet moulding compound (CF-SMC) mechanical properties based on local fibre orientation

Autorzy: Martulli LM, Alves M, Pimenta S, Hine PJ, Kerschbaum M, Lomov SV, Swolfs Y
Opublikowane w: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numer 2018, 2018
Wydawca: ECCM18 digital

Adaptation of Weibull analysis to represent strength behaviour of brittle fibres

Autorzy: Islam, Faisal; Joannès, Sébastien; Bunsell, Anthony; Laiarinandrasana, Lucien
Opublikowane w: ICCM 22 - 22nd International Conference on Composite Materials, Numer Aug 2019, 2019
Wydawca: ICCM22 (digital)

Ply fragmentation in interlayer hybrid composites modelled directly from the fibre break statistics

Autorzy: Mesquita F, Swolfs Y, Lomov SV, Gorbatikh L
Opublikowane w: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numer Athens, 24-28 June 2018, 2018
Wydawca: ECCM 18

Prediction of tensile stiffness and failure of carbon fibre composite laminate: a multi-scale non-deterministic approach

Autorzy: Malgioglio F, Matveeva A, Swolfs Y, Farkas L
Opublikowane w: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numer Athens, 24-28 June 2018, 2018
Wydawca: ECCM 18

Low Velocity Impact and Compression After Impact of thin-ply CFRP Bouligand Structures

Autorzy: Mencattelli L, Pinho ST
Opublikowane w: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numer Athens, 24-28 June 2018, 2018
Wydawca: ECCM 18

Modelling the effect of porosity on the mechanical properties of unidirectional composites. The case of thick-walled pressure vessels

Autorzy: Rojek J, Joannès S, Mavrogordato M, Laiarinandrasana L, Bunsell A, Thionnet A
Opublikowane w: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numer Athens, 24-28 June 2018, 2018
Wydawca: ECCM 18

Manufacturing and performance of hybrid fabric reinforcements and their composites

Autorzy: Rajpurohit A, Singery V, Joannès S, Sanial P, Laiarinandrasana L
Opublikowane w: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numer Athens, 24-28 June 2018, 2018
Wydawca: ECCM 18

Do transverse cracks affect in-situ strength and fibre breaks distribution in longitudinal plies of cross-ply laminates?

Autorzy: Melnikov A, Swolfs Y, Lomov SV, Gorbatikh L
Opublikowane w: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numer Athens, 24-28 June 2018, 2018
Wydawca: ECCM 18

The application of a reduced volume method for the simulation of the characterisation of a carbon fibre pressure vessel

Autorzy: Widjaja MP, Joannès S, Bunsell A, Mair G, Thionnet A
Opublikowane w: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numer Athens, 24-28 June 2018, 2018
Wydawca: ECCM 18

Defining a Reduced Volume Zone for the Simulation of Burst Test on a Composite Pressure Vessels

Autorzy: Widjaja MP, Joannès S, Bunsell A, Mair G, Thionnet A
Opublikowane w: Proceeding of the 8th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2018), Numer Tarbes, France, 28-31 August 2018, 2018
Wydawca: ICSAAM 2018

Towards accurate and efficient single fibre characterization to better assess failure strength distribution

Autorzy: Islam F, Joannes S, Bucknell S, Leray Y, Bunsell A, Laiarinandrasana L
Opublikowane w: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numer Athens, 24-28 June 2018, 2018
Wydawca: ECCM 2018

Analysing the effect of fibre waviness on the stiffness of tow-based discontinuous composites

Autorzy: Alves M, Pimenta S
Opublikowane w: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numer Athenes, 24-28 June 2018, 2018
Wydawca: ECCM 18

Pushing the boundaries of carbon fibre sheet moulding compounds: application to thick automotive components

Autorzy: Martulli LM, Creemers T, Kerschbaum M, Lomov SV, Swolfs Y
Opublikowane w: SAMPE Europe 2019, Numer September 2019 (digital), 2019
Wydawca: SAMPE Europe

Ultra-Thin and Stiff Randomly-Oriented Discontinuous Composites

Autorzy: MARCO ALVES, DAVID CARLSTEDT, LEIF ASP, FREDRIK OHLSSON, SORAIA PIMENTA
Opublikowane w: American Society for Composites 2019, Numer Proceedings of the American Society for Composites 2019, 2019, ISBN 978-1-60595-602-2
Wydawca: DEStech Publications, Inc.
DOI: 10.12783/asc34/31369

Material parameter identification challenge and procedure for intra-laminar damage prediction in unidirectional CFRP

Autorzy: Malgioglio F, Carrella-Payan D, Magneville B, Farkas L
Opublikowane w: Proceedings of the Composites2017, Numer September 2017, 2017
Wydawca: n/a

Characterization and statistical analysis of single fiber strength of fibers at various processing stages

Autorzy: Rajpurohit, Ashok; Joannès, Sébastien; Islam, Faisal; Singery, Vicky; Bucknell, Steve; Laiarinandrasana, Lucien
Opublikowane w: ICCM 22 - 22nd International Conference on Composite Materials,, Numer Aug 2019, 2019
Wydawca: ICCM22 (digital)

Tensile properties of single carbon fibres tested with automated equipment

Autorzy: Mesquita F, Swolfs Y, Leray Y, Bucknell S, Lomov SV, Gorbatikh L
Opublikowane w: 22nd International conference on Composite Materials (ICCM-22), Numer August 2019, 2019
Wydawca: ICCM22 (digital)

Development and performance evaluation of inter-ply and intra-ply hybrid fabric reinforcements and their composites

Autorzy: Rajpurohit, Ashok; Singery, Vicky; Joannès, Sébastien; Sanial, Philippe; Laiarinandrasana, Lucien
Opublikowane w: ICRACM 2019 - 6th International Conference on Recent Advances in Composite Materials, Numer 25–28 February 2019, 2019
Wydawca: ICRACM-2019

Enhancing the damage tolerance of SRPP/CFPP hybrid composites via a bio-inspired design

Autorzy: Mencattelli L, Tang J, Swolfs Y, Gorbatikh L, Pinho ST
Opublikowane w: ICCM22 - 22nd International Conference on Composite Materials, Numer August 2019, 2019
Wydawca: ICCM22 (digital)