Fibre break models for designing novel composite microstructures and applications

Informazioni relative al progetto

FiBreMoD

ID dell’accordo di sovvenzione: 722626

DOI

10.3030/722626

Progetto chiuso

Data della firma CE 16 Agosto 2016

Data di avvio 1 Ottobre 2016

Data di completamento 30 Settembre 2020

Finanziato da

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Costo totale

€ 3 370 807,44

Contributo UE

€ 3 370 807,44

Coordinato da

KATHOLIEKE UNIVERSITEIT LEUVEN
Belgium

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (3)

Best practices for measuring matrix, fibre and interfacial properties

Report describing best practices for measuring matrix, fibre and interfacial properties

The effect of voids on the mechanical properties of carbon fibre reinforced composites
Instructions for participants in the benchmarking exercise

Open Research Data Pilot (1)

Publication of the results of the benchmarking exercise

Websites, patent fillings, videos etc. (1)

Website up and running

Pubblicazioni

Peer reviewed articles (27)

The influence of 3D microstructural features on the elastic behaviour of tow-based discontinuous composites

Autori: Marco Alves, Soraia Pimenta
Pubblicato in: Composite Structures, Numero 251, 2020, Pagina/e 112484, ISSN 0263-8223
Editore: Elsevier BV
DOI: 10.1016/j.compstruct.2020.112484

Ultra-strong and stiff randomly-oriented discontinuous composites: Closing the gap to quasi-isotropic continuous-fibre laminates

Autori: M. Alves, D. Carlstedt, F. Ohlsson, L.E. Asp, S. Pimenta
Pubblicato in: Composites Part A: Applied Science and Manufacturing, Numero 132, 2020, Pagina/e 105826, ISSN 1359-835X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.105826

A novel particle-filled carbon-fibre reinforced polymer model composite tailored for the application of digital volume correlation and computed tomography

Autori: E Schöberl, C Breite, S Rosini, Y Swolfs, MN Mavrogordato, I Sinclair, SM Spearing
Pubblicato in: Journal of Composite Materials, Numero -, 2021, Pagina/e 002199832096638, ISSN 0021-9983
Editore: SAGE Publications
DOI: 10.1177/0021998320966388

Realising bio-inspired impact damage-tolerant thin-ply CFRP Bouligand structures via promoting diffused sub-critical helicoidal damage

Autori: Lorenzo Mencattelli, Silvestre T. Pinho
Pubblicato in: Composites Science and Technology, Numero 182, 2019, Pagina/e 107684, ISSN 0266-3538
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2019.107684

Micro-CT based structure tensor analysis of fibre orientation in random fibre composites versus high-fidelity fibre identification methods

Autori: Radmir Karamov, Luca M. Martulli, Martin Kerschbaum, Ivan Sergeichev, Yentl Swolfs, Stepan V. Lomov
Pubblicato in: Composite Structures, Numero 235, 2020, Pagina/e 111818, ISSN 0263-8223
Editore: Elsevier BV
DOI: 10.1016/j.compstruct.2019.111818

Ultra-thin-ply CFRP Bouligand bio-inspired structures with enhanced load-bearing capacity, delayed catastrophic failure and high energy dissipation capability

Autori: Lorenzo Mencattelli, Silvestre T. Pinho
Pubblicato in: Composites Part A: Applied Science and Manufacturing, Numero 129, 2020, Pagina/e 105655, ISSN 1359-835X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105655

Uncertainty in Fibre Strength Characterisation Due to Uncertainty in Measurement and Sampling Randomness

Autori: Sébastien Joannès, Faisal Islam, Lucien Laiarinandrasana
Pubblicato in: Applied Composite Materials, Numero 27/3, 2020, Pagina/e 165-184, ISSN 0929-189X
Editore: Kluwer Academic Publishers
DOI: 10.1007/s10443-020-09803-9

Combining digital image correlation with X-ray computed tomography for characterization of fiber orientation in unidirectional composites

Autori: Mahoor Mehdikhani, Christian Breite, Yentl Swolfs, Martine Wevers, Stepan V. Lomov, Larissa Gorbatikh
Pubblicato in: Composites Part A: Applied Science and Manufacturing, Numero 142, 2021, Pagina/e 106234, ISSN 1359-835X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.106234

Carbon fibre sheet moulding compounds with high in-mould flow: Linking morphology to tensile and compressive properties

Autori: Luca M. Martulli, Leen Muyshondt, Martin Kerschbaum, Soraia Pimenta, Stepan V. Lomov, Yentl Swolfs
Pubblicato in: Composites Part A: Applied Science and Manufacturing, Numero 126, 2019, Pagina/e 105600, ISSN 1359-835X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105600

Hybrid Effect in In-Plane Loading of Carbon/Glass Fibre Based Inter- and Intraply Hybrid Composites

Autori: Ashok Rajpurohit, Sébastien Joannès, Vicky Singery, Philippe Sanial, Lucien Laiarinandrasana
Pubblicato in: Journal of Composites Science, Numero 4/1, 2020, Pagina/e 6, ISSN 2504-477X
Editore: MDPI
DOI: 10.3390/jcs4010006

A thick-walled sheet moulding compound automotive component: Manufacturing and performance

Autori: L.M. Martulli, Thomas Creemers, Erich Schöberl, Nicholas Hale, Martin Kerschbaum, Stepan V. Lomov, Yentl Swolfs
Pubblicato in: Composites Part A: Applied Science and Manufacturing, Numero 128, 2020, Pagina/e 105688, ISSN 1359-835X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.105688

Herringbone-Bouligand CFRP structures: A new tailorable damage-tolerant solution for damage containment and reduced delaminations

Autori: Lorenzo Mencattelli, Silvestre T. Pinho
Pubblicato in: Composites Science and Technology, Numero 190, 2020, Pagina/e 108047, ISSN 0266-3538
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2020.108047

Morphology-induced fatigue crack arresting in carbon fibre sheet moulding compounds

Autori: Luca M. Martulli, Leen Muyshondt, Martin Kerschbaum, Soraia Pimenta, Stepan V. Lomov, Yentl Swolfs
Pubblicato in: International Journal of Fatigue, Numero 134, 2020, Pagina/e 105510, ISSN 0142-1123
Editore: Elsevier BV
DOI: 10.1016/j.ijfatigue.2020.105510

Bio-inspired design for enhanced damage tolerance of self-reinforced polypropylene/carbon fibre polypropylene hybrid composites

Autori: Lorenzo Mencattelli, Jun Tang, Yentl Swolfs, Larissa Gorbatikh, Silvestre T. Pinho
Pubblicato in: Composites Part A: Applied Science and Manufacturing, Numero 121, 2019, Pagina/e 341-352, ISSN 1359-835X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2019.03.028

Microscale material variability and its effect on longitudinal tensile failure of unidirectional carbon fibre composites

Autori: Fabio Malgioglio, Soraia Pimenta, Anna Matveeva, Laszlo Farkas, Wim Desmet, Stepan V. Lomov, Yentl Swolfs
Pubblicato in: Composite Structures, Numero 261, 2021, Pagina/e 113300, ISSN 0263-8223
Editore: Elsevier BV
DOI: 10.1016/j.compstruct.2020.113300

Ply fragmentation in unidirectional hybrid composites linked to stochastic fibre behaviour: A dual-scale model

Autori: Francisco Mesquita, Yentl Swolfs, Stepan V. Lomov, Larissa Gorbatikh
Pubblicato in: Composites Science and Technology, Numero 181, 2019, Pagina/e 107702, ISSN 0266-3538
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2019.107702

Fibre-direction strain measurement in a composite ply under quasi-static tensile loading using Digital Volume Correlation and in situ Synchrotron Radiation Computed Tomography

Autori: E. Schöberl, C. Breite, A. Melnikov, Y. Swolfs, M.N. Mavrogordato, I. Sinclair, S.M. Spearing
Pubblicato in: Composites Part A: Applied Science and Manufacturing, Numero 137, 2020, Pagina/e 105935, ISSN 1359-835X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.105935

A computationally-efficient micromechanical model for the fatigue life of unidirectional composites under tension-tension loading

Autori: Marco Alves, Soraia Pimenta
Pubblicato in: International Journal of Fatigue, Numero 116, 2018, Pagina/e 677-690, ISSN 0142-1123
Editore: Elsevier BV
DOI: 10.1016/j.ijfatigue.2018.05.017

Multi-instrument multi-scale experimental damage mechanics for fibre reinforced composites

Autori: Stepan V Lomov, Christian Breite, Delphine Carrella-Payan, Valter Carvelli, Nuri Ersoy, Marco Gigliotti, Raquel Antoranz Gonzalez, Sergey Ivanov, Malika Kersani, Marie-Christine Lafarie-Frenot, Mark Mavrogordato, Mahoor Mehdikhani, Arsen Melnikov, Francisco Mesquita, Fatih Oz, Yannick Pannier, Lincy Pyl, Erich Schöberl, Ian Sinclair, S Mark Spearing, Yentl Swolfs, Danny Van Hemelrijk, Man Zhu, La
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 406, 2018, Pagina/e 012057, ISSN 1757-899X
Editore: IOP Publishing
DOI: 10.1088/1757-899X/406/1/012057

Fibre direction strain measurement in a composite ply under pure bending using Digital Volume Correlation and Micro-focus Computed Tomography

Autori: Erich Schöberl, MN Mavrogordato, I Sinclair, SM Spearing
Pubblicato in: Journal of Composite Materials, Numero 54/14, 2020, Pagina/e 1889-1912, ISSN 0021-9983
Editore: SAGE Publications
DOI: 10.1177/0021998320918648

Void growth measurement and modelling in a thermosetting epoxy resin using SEM and tomography techniques

Autori: Jan Rojek, Christian Breite, Yentl Swolfs, Lucien Laiarinandrasana
Pubblicato in: Continuum Mechanics and Thermodynamics, Numero 32/2, 2020, Pagina/e 471-488, ISSN 0935-1175
Editore: Springer Verlag
DOI: 10.1007/s00161-020-00865-5

A dataset of micro-scale tomograms of unidirectional glass fiber/epoxy and carbon fiber/epoxy composites acquired via synchrotron computed tomography during in-situ tensile loading

Autori: Mahoor Mehdikhani, Christian Breite, Yentl Swolfs, Martine Wevers, Stepan V. Lomov, Larissa Gorbatikh
Pubblicato in: Data in Brief, Numero 34, 2021, Pagina/e 106672, ISSN 2352-3409
Editore: Elsevier BV
DOI: 10.1016/j.dib.2020.106672

Weld lines in tow-based sheet moulding compounds tensile properties: Morphological detrimental factors

Autori: L.M. Martulli, Martin Kerschbaum, Stepan V. Lomov, Yentl Swolfs
Pubblicato in: Composites Part A: Applied Science and Manufacturing, Numero 139, 2020, Pagina/e 106109, ISSN 1359-835X
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesa.2020.106109

Engineering tensile behavior of hybrid carbon fiber/self-reinforced polypropylene composites by bio-inspired fiber discontinuities

Autori: Jun Tang, Yentl Swolfs, Arya Aslani, Lorenzo Mencattelli, Gianmaria Bullegas, Silvestre T. Pinho, Stepan V. Lomov, Larissa Gorbatikh
Pubblicato in: Composites Part B: Engineering, Numero 178, 2019, Pagina/e 107502, ISSN 1359-8368
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2019.107502

Blind benchmarking of seven longitudinal tensile failure models for two virtual unidirectional composites

Autori: C. Breite, A. Melnikov, A. Turon, A.B. de Morais, F. Otero, F. Mesquita, J. Costa, J.A. Mayugo, J.M. Guerrero, L. Gorbatikh, L.N. McCartney, M. Hajikazemi, P.P. Camanho, R.P. Tavares, S.V. Lomov, S. Pimenta, W. Van Paepegem, Y. Swolfs
Pubblicato in: Composites Science and Technology, Numero 202, 2021, Pagina/e 108555, ISSN 0266-3538
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2020.108555

Investigation of tensile strength and dimensional variation of T700 carbon fibres using an improved experimental setup

Autori: Faisal Islam, Sébastien Joannès, Steve Bucknell, Yann Leray, Anthony Bunsell, Lucien Laiarinandrasana
Pubblicato in: Journal of Reinforced Plastics and Composites, Numero 39/3-4, 2020, Pagina/e 144-162, ISSN 0731-6844
Editore: SAGE Publications
DOI: 10.1177/0731684419873712

State-of-the-art models for mechanical performance of carbon-glass hybrid composites in wind turbine blades

Autori: Yentl Swolfs, Babak Fazlali, Arsen Melnikov, Francisco Mesquita, Vincent Feyen, Christian Breite, Larissa Gorbatikh, Stepan V Lomov
Pubblicato in: IOP Conference Series: Materials Science and Engineering, Numero 942, 2020, Pagina/e 012005, ISSN 1757-899X
Editore: IOP Publishing
DOI: 10.1088/1757-899x/942/1/012005

Thesis and dissertations (1)

Effet de la porosité dans les réservoirs composites à parois épaisses : Observations expérimentales et modélisation numérique

Autori: Rojek, Jan
Pubblicato in: "Mechanics of materials [physics.class-ph]. English. ⟨NNT : 2020UPSLM015⟩", Numero 11, 2020
Editore: Université Paris sciences et lettres

Conference proceedings (27)

Direct Comparison of the Fibre Break Development in Unidirectional Carbon Fibre Composites Under Tension Predicted by Statistical Models and Measured Using 4D In-situ SRCT

Autori: CHRISTIAN BREITE, ARSEN MELNIKOV, FRANCISCO MESQUITA, LARISSA GORBATIKH, STEPAN V. LOMOV, YENTL SWOLFS
Pubblicato in: American Society for Composites 2020, Numero proceedings of the American Society for Composites 2020, 2020, ISBN 978-1-60595-665-7
Editore: DEStech Publications, Inc.
DOI: 10.12783/asc35/34971

Improvements in Determination of Carbon Fibre Strength Distribution Using Automation and Statistical Data

Autori: Islam, Faisal; Bucknell, Steve; Leray, Yann; Bunsell, Anthony; Laiarinandrasana, Lucien; Joannès, Sébastien
Pubblicato in: Fiber Society's Spring 2018 Conference, Numero Jun 2018, 2018
Editore: The Fiber society

Effect of through-thickness compressive stress and porosity on the tensile strength of carbon-fibre reinforced composites

Autori: Rojek, Jan; Joannès, Sébastien; Teissedre, Jean-Christophe; Laiarinandrasana, Lucien; Bunsell, Anthony
Pubblicato in: ICCM 22 - 22nd International Conference on Composite Materials, Numero Aug 2019,, 2019
Editore: ICCM22 (digital)

Manufacturing and performance of hybrid fabric reinforcements and their composites

Autori: Rajpurohit, Ashok; Singery, Vicky; Joannès, Sébastien; Sanial, Philippe; Laiarinandrasana, Lucien
Pubblicato in: ECCM 18 - 18th European Conference on Composite Materials, Numero Jun 2018, 2018, Pagina/e 8
Editore: ECCM18

Effect of the time-dependent load on type IV cylinders using a multi-scale model

Autori: Widjaja MP, Alves M, Mavrogordato M, Joannès S, Bunsell A, Mair GW, and Thionnet A
Pubblicato in: Proceeding of the Proceeding of the 8th International Conference on Hydrogen Safety (ICHS 8), Numero September 2019, 2019
Editore: ICHS 8

Modelling an Improved NOL Ring Test Using a Reduced Volume Method for the Characterisation of Composite Cylinders

Autori: Widjaja, Martinus P.; Joannès, Sébastien; Bunsell, Anthony R.; Mair, Georg; Thionnet, Alain
Pubblicato in: ICCM 22 - 22nd International Conference on Composite Materials, Numero Aug 2019, 2019
Editore: ICCM22 9digital0

Mapping strains and fibre fracture in carbon fibre composites using in situ digital volume correlation

Autori: Schöberl E, Breite C, Melnikov A, Swolfs Y, Mavrogordato MN, Sinclair I
Pubblicato in: Proceedings of the 22nd International conference on Composite Materials (ICCM-22), Numero August 2019, 2019
Editore: ICCM22 (digital)

Effect of input properties on the predicted failure of a composite pressure vessel using a multiscale model

Autori: Widjaja, Martinus,; Islam, Faisal; Joannès, Sébastien; Bunsell, Anthony; Mair, G.; Thionnet, Alain
Pubblicato in: FiBreMoD Conference, KU Leuven, Numero Dec 2019, 2019
Editore: FiBreMoD (digital)

Predictions of carbon fibre sheet moulding compound (CF-SMC) mechanical properties based on local fibre orientation

Autori: Martulli LM, Alves M, Pimenta S, Hine PJ, Kerschbaum M, Lomov SV, Swolfs Y
Pubblicato in: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numero 2018, 2018
Editore: ECCM18 digital

Adaptation of Weibull analysis to represent strength behaviour of brittle fibres

Autori: Islam, Faisal; Joannès, Sébastien; Bunsell, Anthony; Laiarinandrasana, Lucien
Pubblicato in: ICCM 22 - 22nd International Conference on Composite Materials, Numero Aug 2019, 2019
Editore: ICCM22 (digital)

Ply fragmentation in interlayer hybrid composites modelled directly from the fibre break statistics

Autori: Mesquita F, Swolfs Y, Lomov SV, Gorbatikh L
Pubblicato in: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numero Athens, 24-28 June 2018, 2018
Editore: ECCM 18

Prediction of tensile stiffness and failure of carbon fibre composite laminate: a multi-scale non-deterministic approach

Autori: Malgioglio F, Matveeva A, Swolfs Y, Farkas L
Pubblicato in: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numero Athens, 24-28 June 2018, 2018
Editore: ECCM 18

Low Velocity Impact and Compression After Impact of thin-ply CFRP Bouligand Structures

Autori: Mencattelli L, Pinho ST
Pubblicato in: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numero Athens, 24-28 June 2018, 2018
Editore: ECCM 18

Modelling the effect of porosity on the mechanical properties of unidirectional composites. The case of thick-walled pressure vessels

Autori: Rojek J, Joannès S, Mavrogordato M, Laiarinandrasana L, Bunsell A, Thionnet A
Pubblicato in: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numero Athens, 24-28 June 2018, 2018
Editore: ECCM 18

Manufacturing and performance of hybrid fabric reinforcements and their composites

Autori: Rajpurohit A, Singery V, Joannès S, Sanial P, Laiarinandrasana L
Pubblicato in: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numero Athens, 24-28 June 2018, 2018
Editore: ECCM 18

Do transverse cracks affect in-situ strength and fibre breaks distribution in longitudinal plies of cross-ply laminates?

Autori: Melnikov A, Swolfs Y, Lomov SV, Gorbatikh L
Pubblicato in: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numero Athens, 24-28 June 2018, 2018
Editore: ECCM 18

The application of a reduced volume method for the simulation of the characterisation of a carbon fibre pressure vessel

Autori: Widjaja MP, Joannès S, Bunsell A, Mair G, Thionnet A
Pubblicato in: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numero Athens, 24-28 June 2018, 2018
Editore: ECCM 18

Defining a Reduced Volume Zone for the Simulation of Burst Test on a Composite Pressure Vessels

Autori: Widjaja MP, Joannès S, Bunsell A, Mair G, Thionnet A
Pubblicato in: Proceeding of the 8th International Conference on Structural Analysis of Advanced Materials (ICSAAM 2018), Numero Tarbes, France, 28-31 August 2018, 2018
Editore: ICSAAM 2018

Towards accurate and efficient single fibre characterization to better assess failure strength distribution

Autori: Islam F, Joannes S, Bucknell S, Leray Y, Bunsell A, Laiarinandrasana L
Pubblicato in: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numero Athens, 24-28 June 2018, 2018
Editore: ECCM 2018

Analysing the effect of fibre waviness on the stiffness of tow-based discontinuous composites

Autori: Alves M, Pimenta S
Pubblicato in: Proceeding of the 18th European Conference on Composite Materials (ECCM 18), Numero Athenes, 24-28 June 2018, 2018
Editore: ECCM 18

Pushing the boundaries of carbon fibre sheet moulding compounds: application to thick automotive components

Autori: Martulli LM, Creemers T, Kerschbaum M, Lomov SV, Swolfs Y
Pubblicato in: SAMPE Europe 2019, Numero September 2019 (digital), 2019
Editore: SAMPE Europe

Ultra-Thin and Stiff Randomly-Oriented Discontinuous Composites

Autori: MARCO ALVES, DAVID CARLSTEDT, LEIF ASP, FREDRIK OHLSSON, SORAIA PIMENTA
Pubblicato in: American Society for Composites 2019, Numero Proceedings of the American Society for Composites 2019, 2019, ISBN 978-1-60595-602-2
Editore: DEStech Publications, Inc.
DOI: 10.12783/asc34/31369

Material parameter identification challenge and procedure for intra-laminar damage prediction in unidirectional CFRP

Autori: Malgioglio F, Carrella-Payan D, Magneville B, Farkas L
Pubblicato in: Proceedings of the Composites2017, Numero September 2017, 2017
Editore: n/a

Characterization and statistical analysis of single fiber strength of fibers at various processing stages

Autori: Rajpurohit, Ashok; Joannès, Sébastien; Islam, Faisal; Singery, Vicky; Bucknell, Steve; Laiarinandrasana, Lucien
Pubblicato in: ICCM 22 - 22nd International Conference on Composite Materials,, Numero Aug 2019, 2019
Editore: ICCM22 (digital)

Tensile properties of single carbon fibres tested with automated equipment

Autori: Mesquita F, Swolfs Y, Leray Y, Bucknell S, Lomov SV, Gorbatikh L
Pubblicato in: 22nd International conference on Composite Materials (ICCM-22), Numero August 2019, 2019
Editore: ICCM22 (digital)

Development and performance evaluation of inter-ply and intra-ply hybrid fabric reinforcements and their composites

Autori: Rajpurohit, Ashok; Singery, Vicky; Joannès, Sébastien; Sanial, Philippe; Laiarinandrasana, Lucien
Pubblicato in: ICRACM 2019 - 6th International Conference on Recent Advances in Composite Materials, Numero 25–28 February 2019, 2019
Editore: ICRACM-2019

Enhancing the damage tolerance of SRPP/CFPP hybrid composites via a bio-inspired design

Autori: Mencattelli L, Tang J, Swolfs Y, Gorbatikh L, Pinho ST
Pubblicato in: ICCM22 - 22nd International Conference on Composite Materials, Numero August 2019, 2019
Editore: ICCM22 (digital)