Ziel
NHYTE project aims at developing and demonstrating concepts and methodologies enabling the realization of innovative integrated aero-structures, made of a new hybrid thermoplastic matrix composite material with multifunctional capabilities. The high-performing material proposed, based on a commercial PEEK-Carbon Fiber Prepreg with addition of amorphous (PEI) films, answers to the needs to have reduced weight and consequently reduced fuel consumptions and emissions on an aircraft, as well as reduced manufacturing and operational costs. Demonstration aero-structures will be fabricated by an innovative working cell implementing an advanced continuous automated production process, including: automated hybrid material fabrication; manufacturing of skin panels by automated fiber placement in-situ consolidation process; fabrication of stringers by continuous forming; component assembly by induction welding. The innovative material, conceived and patented by a partner of the Consortium, is an example of multifunctional composite, since it returns both functions of toughness improvement (multilayer material) and process simplification. This concept on one side will provide an advantage from the structural point of view, in terms of better impact damage performance; while on the other side major advantages will result on processing simplification, in particular including improved cycle times and lower energy consumptions, since it does not require the use of an autoclave curing phase. As of today, its usage has been limited to fabricate panels, only at laboratory level; hence, a suitable improvement finalized to process in industrial environment is needed. Proposed process techniques and assembly will be the first step towards the industrial application of the innovative material. Consortium has set a target for weight saving not less than 5% for primary structures. Further reduction of full life cycle cost is expected from scrape material and end of life structures recycling.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- Technik und TechnologieMaschinenbauProduktionstechnik
- Technik und TechnologieUmwelttechnikAbfallwirtschaftAbfallbehandlungsverfahrenRecycling
- Technik und TechnologieWerkstofftechnikFasern
- Technik und TechnologieWerkstofftechnikVerbundwerkstoffe
- Technik und TechnologieMaschinenbauFahrzeugbauLuft- und RaumfahrttechnikFlugzeug
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Aufforderung zur Vorschlagseinreichung
(öffnet in neuem Fenster) H2020-MG-2016-2017
Andere Projekte für diesen Aufruf anzeigenUnterauftrag
H2020-MG-2016-Two-Stages
Finanzierungsplan
RIA - Research and Innovation actionKoordinator
74020 Avetrana Ta
Italien
Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen).