Obiettivo
The aim of the EMMC-CSA is to establish current and forward looking complementary activities necessary to bring the field of materials modelling closer to the demands of manufacturers (both small and large enterprises) in Europe. The ultimate goal is that materials modelling and simulation will become an integral part of product life cycle management in European industry, thereby making a strong contribution to enhance innovation and competitiveness on a global level. Based on intensive efforts in the past two years within the European Materials Modelling Council (EMMC) which included numerous consultation and networking actions with representatives of all stakeholders including Modellers, Software Owners, Translators and Manufacturers in Europe, the EMMC identified and proposed a set of underpinning and enabling actions to increase the industrial exploitation of materials modelling in Europe
EMMC-CSA will pursue the following overarching objectives in order to establish and strengthen the underpinning foundations of materials modelling in Europe and bridge the gap between academic innovation and industrial application:
1. Enhance the interaction and collaboration between all stakeholders engaged in different types of materials modelling, including modellers, software owners, translators and manufacturers.
2. Facilitate integrated materials modelling in Europe building on strong and coherent foundations.
3. Coordinate and support actors and mechanisms that enable rapid transfer of materials modelling from academic innovation to the end users and potential beneficiaries in industry.
4. Achieve greater awareness and uptake of materials modelling in industry, in particular SMEs.
5. Elaborate Roadmaps that (i) identify major obstacles to widening the use of materials modelling in European industry and (ii) elaborate strategies to overcome them.
This EMMC-CSA stems directly out of the actions of the EMMC and will continue and build upon its existing activities.
Campo scientifico
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
- natural sciencescomputer and information sciencesknowledge engineeringontology
- natural sciencescomputer and information sciencesdatabases
- natural sciencescomputer and information sciencessoftwaresoftware development
- social scienceseconomics and businessbusiness and managementbusiness models
- social scienceseconomics and businesseconomicssustainable economy
Programma(i)
Invito a presentare proposte
Vedi altri progetti per questo bandoBando secondario
H2020-NMBP-CSA-2016
Meccanismo di finanziamento
CSA - Coordination and support actionCoordinatore
1040 Wien
Austria
Mostra sulla mappa
Partecipanti (17)
80686 Munchen
Mostra sulla mappa
CB4 0WS Cambridge
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
10129 Torino
Mostra sulla mappa
751 05 Uppsala
Mostra sulla mappa
4542 NM Hoek
Mostra sulla mappa
1015 Lausanne
Mostra sulla mappa
5600 AX EINDHOVEN
Mostra sulla mappa
Partecipazione conclusa
7034 Trondheim
Mostra sulla mappa
52072 Aachen
Mostra sulla mappa
21502 Geesthacht
Mostra sulla mappa
92120 MONTROUGE
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
Partecipazione conclusa
2100 Copenhagen
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
CB1 7EG Cambridge
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
YO10 5DD York North Yorkshire
Mostra sulla mappa
7034 Trondheim
Mostra sulla mappa
40126 Bologna
Mostra sulla mappa
1200 Copenhagen V
Mostra sulla mappa