Skip to main content
Go to the home page of the European Commission (opens in new window)
English en
CORDIS - EU research results
CORDIS

Portable Nano-Particle Emission Measurement System

Objective

The PEMs4Nano project (P4N) addresses the development (based on current direct injection gasoline engines) of measurement procedures down to 10nm, providing a contribution to future regulation on particle emissions, in particular in real driving conditions. The activities planned in the project will also support the understanding, measurement and regulation of particle emissions below 23 nm (with the threshold of at least 10 nm).
Societal concerns for the environment include both fuel consumption and noxious emissions, as well as the awareness that meeting CO2-goals with newest technologies may also lead to the emission of smaller nanoparticles that are undetected by current certification procedures. Hence P4N has the goal to develop measurement procedures that are robust and reliable for both the development of the new engine technologies, as well as serving as a solid basis for new regulations. This has the advantage of establishing a solid content link between development activities and regulation. Two complementary measurement systems will be optimized for use in the development laboratory and for mobile testing based on current technologies. Given the numerous parameters associated with the engine (combustion and exhaust systems) technologies and measurement procedures; physico-chemical and data-driven simulations combined with optimization is proposed to establish valuable correlations between measurements made in the development laboratory and thus finally those measured on the road.
PEMs4nano thus proposes a two path approach that connects tailpipe measurements with the origin and the evolution of the particles, resulting in a seamless approach from the laboratory to the field test capabilities. Investigations of particle characteristics (incl.composition size and morphology) and their influence on successful measurements will also be carried out using various load profiles that make up real-driving to validate the application of the measurement procedure

Fields of science (EuroSciVoc)

Programme(s)

Topic(s)

Funding Scheme

RIA - Research and Innovation action

See all projects funded under this funding scheme

Call for proposal

(opens in new window) H2020-GV-2016-2017

See all projects funded under this call

Coordinator

HORIBA EUROPE GMBH
Net EU contribution
€ 559 125,00
Address
HANS-MESS-STRASSE 6
61440 OBERURSEL TAUNUS
Germany
Region
Berlin Berlin Berlin
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Links
Total cost
€ 621 250,00

Participants (10)