Obiettivo
The results obtained show that it is absolutely necessary, in the case of the treatment of oily sludges such as those studied here, to entirely separate two problems:
- the problem of the pollution solubilisation by the contact of the waste material with water, such as it may be simulated by laboratory lixiviation tests,
- the problem of the physical state of the treated waste material, which conditions its medium- or long-term possibilities for handling and intermediate stocking (lagoon, slag-heap, dumping site).
Among all studied techniques of chemical conditioning, the use of quick lime seems to be the most efficient for solving the first of the above two problems. Such a treatment has an already important efficiency for lowering the solubilizable potential (about 45% for COD and salinity), for doses as low as 5% of the mass of crude waste to be treated.
The solution of the second problem requires the addition of powdery solid reagents. Only two classes of reagents seem to be suitable: utilization of quick lime (or of a material containing quick lime) in high doses, or use of organic materials absorbing oily substances
The iron industry consumes large quantities of various oils and greases for such objectives as rolling, lubrication, protection, hydraulic drive. For this reason, it also produces important quantities of waste oils and greases. Their centralized treatment is already realized or organized in numerous steelworks and this leads to the recirculation of the major part of these oils and greases as fuel or noble materials. There nevertheless remain certain oily and greasy waste substances which can technically and economically neither be utilized as fuel, nor be regenerated. For these waste materials, only two possibilities are presently available to the operator: either to give them to specialized removing organizations, and this rapidly becomes prohibitive; or to stock them in special tanks or lagoons, and this is already or shall at a short date be prohibited, because of the pollution risks for soils and groundwater tables.
It was thus compulsory to look for other ways. This is the aim of the present research, the general objectives of which are:
- the development of a simple treatment and conditioning technique for non-valorizable oily sludges and emulsions, in view to obtain a final waste product which can be stocked and removed without any risk for the environment (surface and groundwater, soils, atmosphere),
- the exploitation of the way consisting to apply, as a pre-treatment, the addition of chemical reagents and physical separations, with the exception of solvent extraction and distillation, which should not be considered here for economical reasons of inadequacy for little valorizable waste materials.
In order to limit the subject and to obtain rapidly valorizable results, the following priorities were chosen:
- An absolute priority is conferred to the solution of the problem of resorption of oily sludge deposits, relatively to that of the treatment of oily sludges by their production, as the quantities relating to the first point are much more important,
- The older oily sludge deposits present a stratified structure: a supernatant oil layer, the separation and valorization of which may be most easily considered; a layer of polluted water, enabling the application of classical techniques of waste water treatment; an underlying layer of sediment impregnated with oils and greases difficult separate and valorize. Priority is attributed to the treatment of this latter layer, as the site reclamation is conditioned by its resorption.
- The studied techniques must cover the resorption on the site and the treatment with handling, transport and external disposal of the material.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Dati non disponibili
Coordinatore
54515 Vandoeuvre
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.