Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2022-11-21

Study of the possibilities of treating simultaneously steelmaking waste rich in Zn/Pb and depleted hydrochloric pickling baths - Phase I

Ziel


Now that this initial stage of the research has been concluded, it appears:

- that the process of acidic leaching of the zinc-containing and lead-containing residues with the aid of spent hydrochloric pickling baths can at present be envisaged only for recycling blast furnace sludges, with the exclusion of dust from a steel plant (oxygen converter or electric);

- that, in the case of this steel plant dust, the process may possibly be adopted only as a means of preliminary inertizing when the actual dumping of the residue is not permitted.
The problem of treating steelmaking sludge and dust rich in zinc and lead has not yet been resolved satisfactorily, except where zinc and lead contents are particularly high (eg electric melting shop dust).

A novel and economical solution to this problem is to be developed by carrying out research into the possibilities of treating such sludge and dust with another waste product occurring in integrated steelworks, depleted hydrochloric pickling baths. These are characterized by relatively low free acidity but extremely high potential acidity, if the ferrous iron in the sludge is oxidized and then the ferric salts are precipitated out in the form of goethite, which is an easily filtered insoluble compound.

This procedure should give the baths a high solubilizing capacity, further reinforced by the complexing action of the chloride ions.

The alkaline compounds in the sludge and dusts (ZnO, PbO, CaO, etc) will be dissolved by the acid released by hydrolysis of the ferric salts, whilst the iron oxides and carbon will remain unchanged.

Two successive research phases are planned, as follows:

1) Checking of basic chemical reactions in discontinuous reactors in order to confirm the feasibility of the flow-sheets proposed, define the main operating conditions and establish the order of magnitude of the yield of the different reactions.

Possible interactions between the successive phases will also be studied, in order to detect any incompatibilities and develop suitable solutions.

On completion of this first part of the research an initial technical and financial evaluation will be made of the validity of the process and the conditions of application.

The financial aid granted covers the first research phase only.

2) Selection of a definitive flow-sheet, development of a small-scale continuous treatment unit, and optimization of reactions. This second phase will be proposed to the Commission only after demonstration of the feasibility of the process.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Dieses Projekt wurde noch nicht bei EuroSciVoc klassifiziert.
Schlagen Sie die Wissenschaftsbereiche vor, die Ihrer Einschätzung nach besonders relevant sind, und helfen Sie uns, unseren Klassifizierungsdienst zu verbessern.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Programm/Programme

Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

Daten nicht verfügbar

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

Daten nicht verfügbar

Koordinator

CENTRE DE RECHERCHES METALLURGIQUES
EU-Beitrag
Keine Daten
Adresse
Rue Ernest Solvay, 11
4000 LIEGE
Belgien

Auf der Karte ansehen

Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten
Mein Booklet 0 0