Objetivo
The growing use of zinc-coated steel sheet in a variety of sectors (motor industry, consumer durables and construction industry) has led to an increase in the zinc content of home scrap, a large proportion of which is recycled in L-D steelworks. From a metallurgical point of view, the Zn coating of the scrap does not interfere with the steel production process, nor does it normally affect product quality. However, the zinc does accumulate in the process dusts.
Despite their high iron content, typically around 60%, these dusts cannot be recycled in the sintering plant or the blast furnace because of the zinc load without additional, usually complicated processing stages, above all owing to the risk of scaling in the blast furnace. On the other hand, the typical zinc content of these dusts of 2% is too low to be recycled in zinc foundries. From the purely economic point of view, this currently requires Zn concentrations of well above 30%.
If the dusts and slurries from the waste gas cleaning system of an L-D converter are to be recycled internally, the zinc load must be reduced to a level that will not damage the blast furnace. The main source of the zinc in the dusts from waste gas purification is the scrap used in the converter, the Zn content of which can vary considerably. Some types of scrap are practically zinc-free, eg the uncoated process scrap or comparable new scrap. However, a large proportion of the scrap used, with the exception of the internal scrap arising in the finishing plants, has an unknown zinc content. This is particularly true of capital scrap.
A knowledge of the Zn load per converter batch would basically make it possible to identify and hive off dusts and slurries suitable for the blast furnace. This would permit separation of recyclable and non-recyclable dust fractions, which would reduce the amount of material to be landfilled or processed separately. While it is in principle technically possible to study the Zn content of metal in the scrap industry, the information would not normally be very useful, as it is practically impossible to take a representative sample in normal scrap handling practice.
A way must therefore be found of reliably quantifying the zinc stream from the converter, in order to be able to determine the zinc load of the dusts and slurries from waste gas purification. The evaporation behaviour of zinc can be harnessed for this purpose, as dusts highly contaminated with zinc are driven off as soon as pig iron is poured over the scrap, or during the following first minutes of blowing, so that a reliable zinc analysis should be possible. The task is to develop a method of detecting zinc in the flue dust of the converter deduster. The objective is to measure the Zn content above a threshold value reliably throughout the process, in order to use this information to separate low-zinc from high-zinc dust fractions.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Datos no disponibles
Coordinador
44147 Dortmund
Alemania
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.