Obiettivo
The growing use of zinc-coated steel sheet in a variety of sectors (motor industry, consumer durables and construction industry) has led to an increase in the zinc content of home scrap, a large proportion of which is recycled in L-D steelworks. From a metallurgical point of view, the Zn coating of the scrap does not interfere with the steel production process, nor does it normally affect product quality. However, the zinc does accumulate in the process dusts.
Despite their high iron content, typically around 60%, these dusts cannot be recycled in the sintering plant or the blast furnace because of the zinc load without additional, usually complicated processing stages, above all owing to the risk of scaling in the blast furnace. On the other hand, the typical zinc content of these dusts of 2% is too low to be recycled in zinc foundries. From the purely economic point of view, this currently requires Zn concentrations of well above 30%.
If the dusts and slurries from the waste gas cleaning system of an L-D converter are to be recycled internally, the zinc load must be reduced to a level that will not damage the blast furnace. The main source of the zinc in the dusts from waste gas purification is the scrap used in the converter, the Zn content of which can vary considerably. Some types of scrap are practically zinc-free, eg the uncoated process scrap or comparable new scrap. However, a large proportion of the scrap used, with the exception of the internal scrap arising in the finishing plants, has an unknown zinc content. This is particularly true of capital scrap.
A knowledge of the Zn load per converter batch would basically make it possible to identify and hive off dusts and slurries suitable for the blast furnace. This would permit separation of recyclable and non-recyclable dust fractions, which would reduce the amount of material to be landfilled or processed separately. While it is in principle technically possible to study the Zn content of metal in the scrap industry, the information would not normally be very useful, as it is practically impossible to take a representative sample in normal scrap handling practice.
A way must therefore be found of reliably quantifying the zinc stream from the converter, in order to be able to determine the zinc load of the dusts and slurries from waste gas purification. The evaporation behaviour of zinc can be harnessed for this purpose, as dusts highly contaminated with zinc are driven off as soon as pig iron is poured over the scrap, or during the following first minutes of blowing, so that a reliable zinc analysis should be possible. The task is to develop a method of detecting zinc in the flue dust of the converter deduster. The objective is to measure the Zn content above a threshold value reliably throughout the process, in order to use this information to separate low-zinc from high-zinc dust fractions.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Dati non disponibili
Coordinatore
44147 Dortmund
Germania
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.