Objectif
The growing use of zinc-coated steel sheet in a variety of sectors (motor industry, consumer durables and construction industry) has led to an increase in the zinc content of home scrap, a large proportion of which is recycled in L-D steelworks. From a metallurgical point of view, the Zn coating of the scrap does not interfere with the steel production process, nor does it normally affect product quality. However, the zinc does accumulate in the process dusts.
Despite their high iron content, typically around 60%, these dusts cannot be recycled in the sintering plant or the blast furnace because of the zinc load without additional, usually complicated processing stages, above all owing to the risk of scaling in the blast furnace. On the other hand, the typical zinc content of these dusts of 2% is too low to be recycled in zinc foundries. From the purely economic point of view, this currently requires Zn concentrations of well above 30%.
If the dusts and slurries from the waste gas cleaning system of an L-D converter are to be recycled internally, the zinc load must be reduced to a level that will not damage the blast furnace. The main source of the zinc in the dusts from waste gas purification is the scrap used in the converter, the Zn content of which can vary considerably. Some types of scrap are practically zinc-free, eg the uncoated process scrap or comparable new scrap. However, a large proportion of the scrap used, with the exception of the internal scrap arising in the finishing plants, has an unknown zinc content. This is particularly true of capital scrap.
A knowledge of the Zn load per converter batch would basically make it possible to identify and hive off dusts and slurries suitable for the blast furnace. This would permit separation of recyclable and non-recyclable dust fractions, which would reduce the amount of material to be landfilled or processed separately. While it is in principle technically possible to study the Zn content of metal in the scrap industry, the information would not normally be very useful, as it is practically impossible to take a representative sample in normal scrap handling practice.
A way must therefore be found of reliably quantifying the zinc stream from the converter, in order to be able to determine the zinc load of the dusts and slurries from waste gas purification. The evaporation behaviour of zinc can be harnessed for this purpose, as dusts highly contaminated with zinc are driven off as soon as pig iron is poured over the scrap, or during the following first minutes of blowing, so that a reliable zinc analysis should be possible. The task is to develop a method of detecting zinc in the flue dust of the converter deduster. The objective is to measure the Zn content above a threshold value reliably throughout the process, in order to use this information to separate low-zinc from high-zinc dust fractions.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Données non disponibles
Coordinateur
44147 Dortmund
Allemagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.