From residual steel gasses to methanol

Informazioni relative al progetto

FReSMe

ID dell’accordo di sovvenzione: 727504

DOI 10.3030/727504

Progetto chiuso

Data della firma CE 5 Ottobre 2016

Data di avvio 1 Novembre 2016

Data di completamento 30 Giugno 2021

Finanziato da

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Costo totale € 11 406 725,00

Contributo UE € 11 406 725,00

Coordinato da

I-DEALS INNOVATION & TECHNOLOGY VENTURING SERVICES SL
Spain

Risultati finali

Open Research Data Pilot (1)

ORDP - Data Management Plan

(Corresponding with Task 7.6 ORDP - Data Management Plan) Document, generated within the first 6 months of the project and updated every 6 months, that contains the analysis of the main elements of the data management policy that will be used in the project with regards to all the datasets that will be generated (e.g. experimental data gathered from lab research and field tests, IPR, industry, public and venture capital contacts, etc.).

Documents, reports (3)

N2 dilution experimentally assessed and modelled

Corresponding with Task 33 Sensitivity research in to possible impurities and consequences of large amounts of N2 with the results of the postmortem analysis of the methanol catalyst including its resistance to deactivation Additionally a sensitivity analysis on the utilisation of high quantities of N2 in BFG within the overall process performance will be conducted

Electrolysis in the Iron & Steel Industry

(Corresponding with Task 5.2. Electrolysis in the steel industry: O2 for oxy-steel and H2 for MeOH) Document that includes a description of the models for O2 and H2 production via electrolysis. When addressing the optimum energy efficiency and emissions, the overall production system for steel and methanol and their requirements for O2 /H2 production are described in this document.

Preliminary Life Cycle Inventory (LCI) report on proposed methanol synthesis

(Corresponding with Task 6.2. LCA, CO2 abatement potential) Report that will summarize the preliminary partner interactions (e.g. questionnaires) regarding the conceptual layout and mass and energy balances for methanol synthesis to be used in Life Cycle Inventory (LCI).

Demonstrators, pilots, prototypes (2)

Pilot Plant Construction and Connection to battery limits

Corresponding with Task 25 Procurement and construction Pilot plant demonstration unit connected to battery limits

Delivery of scale-up methanol catalyst and sorbent

Corresponding with Task 41 Catalyst and sorbent fabrication in the required quantities Document with testing results of the selected catalyst scaledup to the tens of Kgs scale The document will also include the results of the sorbent synthesis process optimisations for cost reduction and further improved sustainability

Pubblicazioni

Non-peer reviewed articles (1)

Catalytic Hydrogenation of Carbon Dioxide to Methanol: Synergistic Effect of Bifunctional Cu/Perovskite Catalysts

Autori: Matej Huš, Drejc Kopač, Blaž Likozar
Pubblicato in: ACS Catalysis, Numero 9/1, 2018, Pagina/e 105-116, ISSN 2155-5435
Editore: American Chemical Society
DOI: 10.1021/acscatal.8b03810

Conference proceedings (3)

From Residual Steel Gases to Methanol: The Fresme Project

Autori: Bonalumi, Davide and Manzolini, Giampaolo and Vente, Jaap and van Dijk, H.A.J. and Hooey, Lawrence and Sarron, Emerit
Pubblicato in: 2019
Editore: SSRN

Analisi del ciclo di vita della produzione di metanolo dai gas di acciaieria: il progetto europeo FReSMe

Autori: Brivio E., Rigamonti L
Pubblicato in: 2019
Editore: XIII Conference of the LCA Italian Network. Roma,

LCA of methanol production from blast furnace gases: the European project FReSMe

Autori: Rigamonti L., Brivio E
Pubblicato in: 2019
Editore: 9th International Conference on Life Cycle Management

Other (1)

PRODUZIONE DI METANOLO DAI GAS DI ACCIAIERIA: IL PROGETTO EUROPEO FRESME

Autori: Lucia Rigamonti; Giulia Borghi
Pubblicato in: Ingegneria dell'Ambiente, Numero Vol. 5 n. 2/2018, 2019, Pagina/e 123-126
Editore: Ingegneria dell'Ambiente