Multifunctional Graphene-based Nanocomposites with Robust Electromagnetic and Thermal Properties for 3D-printing Application

Resultado final

Rheological methodology, optimized processing

Report on Rheological methodology and optimized processing of nanocomposites

Data Sheet of maximum improved nanocomposite mechanical, thermal, electrical and electromagnetic properties

Data Sheet of maximum improved nanocomposite mechanical, thermal, electrical and electromagnetic properties The scientific leadership will be undertaken by INP-BSU

Design of spongy structures with optimized permeability and heat transfer capability

Design of spongy open structures based on the novel material for 3D-printing to be used for electromagnetic shielding, with optimized permeability and heat transfer capability

Materials synthesis and nanocomposite fabrication

Materials synthesis and nanocomposite fabrication test samples to provide for other WPs

Robust nanocomposite design tool
Report on Dissemination, Communication and Outreach activities

This Deliverable D92 will be presented in two stages First Stage Report will be presented at month 24 Final report will be delivered at Month 45

Design of foam-like open closed-shell structures with optimized lightness and mechanical robustness

Design of foamlike closedshell structures based on the novel material for 3Dprinting to be used for electromagnetic shielding with optimized lightness and mechanical robustness

Report on Project Meetings and Networking

This Deliverable Report will be presented in two stages: - First Stage Report will be presented at month 30; - Final report will be delivered at month 46.

Report of essential nanostructure parameters

Graphene 3D Website and Flyer

This Deliverable Report D91 will be presented in Month 3 and will be regulary upgraded to Month 48

Set up Joint Laboratory on Graphene/Polymer Research

"The resposible partners of the D9.5 ""Set up of Joint Laboratory on graphene-polymer research"" will be IMeh and CNR."

Publicaciones

Facile and scalable fabrication of highly thermal conductive polyethylene/graphene nanocomposites by combining solid-state shear milling and FDM 3D-printing aligning methods

Autores: Jingjing Jing, Yinghong Chen, Shaohong Shi, Lu Yang, Philippe Lambin
Publicado en: Chemical Engineering Journal, Edición 402, 2020, Página(s) 126218, ISSN 1385-8947
Editor: Elsevier BV
DOI: 10.1016/j.cej.2020.126218

3D Printing of Delicately Controllable Cellular Nanocomposites Based on Polylactic Acid Incorporating Graphene/Carbon Nanotube Hybrids for Efficient Electromagnetic Interference Shielding

Autores: Shaohong Shi, Zilin Peng, Jingjing Jing, Lu Yang, Yinghong Chen
Publicado en: ACS Sustainable Chemistry & Engineering, Edición 8/21, 2020, Página(s) 7962-7972, ISSN 2168-0485
Editor: American Chemical Society
DOI: 10.1021/acssuschemeng.0c01877

Spinelli, G.; Guarini, R.; Kotsilkova, R.; Batakliev, T.; Ivanov, E.; Romano, V. Experimental and Simulation Studies of Temperature Effect on Thermophysical Properties of Graphene-Based Polylactic Acid. Materials 2022, 15, 986

Autores: Spinelli, G.; Guarini, R.; Kotsilkova, R.; Batakliev, T.; Ivanov, E.; Romano, V
Publicado en: Materials, Edición 15, 2022, Página(s) 23, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma15030986

Thermal and Electromagnetic Properties of Polymer Holey Structures Produced by Additive Manufacturing

Autores: Philippe Lambin, Aliaksandr Liubimau, Dzmitry Bychanok, Luca Vitale, Polina Kuzhir
Publicado en: Polymers, Edición 12/12, 2020, Página(s) 2892, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym12122892

Polyethylene Composites with Segregated Carbon Nanotubes Network: Low Frequency Plasmons and High Electromagnetic Interference Shielding Efficiency

Autores: Ludmila Vovchenko, Ludmila Matzui, Viktor Oliynyk, Yurii Milovanov, Yevgen Mamunya, Nadezhda Volynets, Artyom Plyushch, Polina Kuzhir
Publicado en: Materials, Edición 13/5, 2020, Página(s) 1118, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma13051118

Facile fabrication of lightweight porous FDM-Printed polyethylene/graphene nanocomposites with enhanced interfacial strength for electromagnetic interference shielding

Autores: Jingjing Jing, Yu Xiong, Shaohong Shi, Haoran Pei, Yinghong Chen, Philippe Lambin
Publicado en: Composites Science and Technology, Edición 207, 2021, Página(s) 108732, ISSN 0266-3538
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2021.108732

Terahertz Optics of Materials with Spatially Harmonically Distributed Refractive Index

Autores: Dzmitry Bychanok, Gleb Gorokhov, Artyom Plyushch, Alfredo Ronca, Marino Lavorgna, Hesheng Xia, Patrizia Lamberti, Polina Kuzhir
Publicado en: Materials, Edición 13/22, 2020, Página(s) 5208, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma13225208

Experimental, Theoretical and Simulation Studies on the Thermal Behavior of PLA-Based Nanocomposites Reinforced with Different Carbonaceous Fillers

Autores: Giovanni Spinelli, Rosella Guarini, Rumiana Kotsilkova, Evgeni Ivanov, Vittorio Romano
Publicado en: Nanomaterials, Edición 11/6, 2021, Página(s) 1511, ISSN 2079-4991
Editor: MDPI
DOI: 10.3390/nano11061511

Evaluation of the macromechanical properties of PLA-based nanocomposites by means of three-point bending method

Autores: Todor Batakliev
Publicado en: Journal of Theoretical and Applied Mechanics, Edición 51, 1, 2021, Página(s) 22-34, ISSN 0861-6663
Editor: Bulgarian Academy of Sciences, Marin Drinov Publishing House

Essential Nanostructure Parameters to Govern Reinforcement and Functionality of Poly(lactic) Acid Nanocomposites with Graphene and Carbon Nanotubes for 3D Printing Application

Autores: Rumiana Kotsilkova, Evgeni Ivanov, Vladimir Georgiev, Radost Ivanova, Dzhihan Menseidov, Todor Batakliev, Verislav Angelov, Hesheng Xia, Yinghong Chen, Dzmitry Bychanok, Polina Kuzhir, Rosa Di Maio, Clara Silvestre, Sossio Cimmino
Publicado en: Polymers, Edición 12/6, 2020, Página(s) 1208, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym12061208

Preparation of Highly Efficient Electromagnetic Interference Shielding Polylactic Acid/Graphene Nanocomposites for Fused Deposition Modeling Three-Dimensional Printing

Autores: Shaohong Shi, Zilin Peng, Jingjing Jing, Lu Yang, Yinghong Chen, Rumiana Kotsilkova, Evgeni Ivanov
Publicado en: Industrial & Engineering Chemistry Research, Edición 59/35, 2020, Página(s) 15565-15575, ISSN 0888-5885
Editor: American Chemical Society
DOI: 10.1021/acs.iecr.0c02400

Composition dependence in surface properties of poly(lactic acid)/graphene/carbon nanotube composites

Autores: Radost Ivanova, Rumiana Kotsilkova, Evgeni Ivanov, Ricardo K. Donato, Guilhermino J.M. Fechine, Ricardo J.E. Andrade, Rosa di Maio, Clara Silvestre
Publicado en: Materials Chemistry and Physics, Edición 249, 2020, Página(s) 122702, ISSN 0254-0584
Editor: Elsevier BV
DOI: 10.1016/j.matchemphys.2020.122702

THz Spectroscopy as a Versatile Tool for Filler Distribution Diagnostics in Polymer Nanocomposites

Autores: Gleb Gorokhov, Dzmitry Bychanok, Igor Gayduchenko, Yuriy Rogov, Elena Zhukova, Sergei Zhukov, Lenar Kadyrov, Georgy Fedorov, Evgeni Ivanov, Rumiana Kotsilkova, Jan Macutkevic, Polina Kuzhir
Publicado en: Polymers, Edición 12/12, 2020, Página(s) 3037, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym12123037

Dielectric Spectroscopy and Thermal Properties of Poly(lactic) Acid Reinforced with Carbon-Based Particles: Experimental Study and Design Theory

Autores: Giovanni Spinelli, Rumiana Kotsilkova, Evgeni Ivanov, Vladimir Georgiev, Radost Ivanova, Carlo Naddeo, Vittorio Romano
Publicado en: Polymers, Edición 12/10, 2020, Página(s) 2414, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym12102414

Influence of polymer swelling and dissolution into food simulants on the release of graphene nanoplates and carbon nanotubes from poly(lactic) acid and polypropylene composite films

Autores: Hristiana Velichkova, Ivanka Petrova, Stanislav Kotsilkov, Evgeni Ivanov, Nikolay K. Vitanov, Rumiana Kotsilkova
Publicado en: Journal of Applied Polymer Science, Edición 134/44, 2017, Página(s) 45469, ISSN 0021-8995
Editor: John Wiley & Sons Inc.
DOI: 10.1002/app.45469

Recent Applications of Ionic Liquids in the Sol-Gel Process for Polymer–Silica Nanocomposites with Ionic Interfaces

Autores: Katarzyna Donato, Libor Matějka, Raquel Mauler, Ricardo Donato
Publicado en: Colloids and Interfaces, Edición 1/1, 2018, Página(s) 5, ISSN 2504-5377
Editor: MDPI AG
DOI: 10.3390/colloids1010005

Fully carbon metasurface: Absorbing coating in microwaves

Autores: D. Bychanok, S. Li, G. Gorokhov, K. Piasotski, D. Meisak, P. Kuzhir, E. A. Burgess, C. P. Gallagher, F. Y. Ogrin, A. P. Hibbins, A. Pasc, A. Sanchez-Sanchez, V. Fierro, A. Celzard
Publicado en: Journal of Applied Physics, Edición 121/16, 2017, Página(s) 165103, ISSN 0021-8979
Editor: American Institute of Physics
DOI: 10.1063/1.4982232

Influence of carbon nanotube surface treatment on resistivity and low-frequency noise characteristics of epoxy-based composites

Autores: Marina Tretjak, Sandra Pralgauskaitė, Jan Macutkevic, Jonas Matukas, Juras Banys, Polina Kuzhir, Evgeni Ivanov, Rumiana Kotsilkova
Publicado en: Polymer Composites, Edición 5 March 2018, 2018, Página(s) 7, ISSN 0272-8397
Editor: John Wiley & Sons Inc.
DOI: 10.1002/pc.24775

Terahertz absorption in graphite nanoplatelets/polylactic acid composites

Autores: D Bychanok, P Angelova, A Paddubskaya, D Meisak, L Shashkova, M Demidenko, A Plyushch, E Ivanov, R Krastev, R Kotsilkova, F Y Ogrin, P Kuzhir
Publicado en: Journal of Physics D: Applied Physics, Edición 51/14, 2018, Página(s) 145307, ISSN 0022-3727
Editor: Institute of Physics Publishing
DOI: 10.1088/1361-6463/aab1a5

Experimental and theoretical study on piezoresistive properties of a structural resin reinforced with carbon nanotubes for strain sensing and damage monitoring

Autores: Giovanni Spinelli, Patrizia Lamberti, Vincenzo Tucci, Luigi Vertuccio, Liberata Guadagno
Publicado en: Composites Part B: Engineering, Edición 145, 2018, Página(s) 90-99, ISSN 1359-8368
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2018.03.025

Carbon-Coated Nickel Nanoparticles: Effect on the Magnetic and Electric Properties of Composite Materials

Autores: Artyom Plyushch, Jan Macutkevič, Jūras Banys, Polina Kuzhir, Nikolay Kalanda, Alexander Petrov, Clara Silvestre, Mikhail Uimin, Anatoly Yermakov, Olga Shenderova
Publicado en: Coatings, Edición 8/5, 2018, Página(s) 165, ISSN 2079-6412
Editor: MDPI
DOI: 10.3390/coatings8050165

Structure and Electromagnetic Properties of Cellular Glassy Carbon Monoliths with Controlled Cell Size

Autores: Andrzej Szczurek, Vanessa Fierro, Artyom Plyushch, Jan Macutkevic, Polina Kuzhir, Alain Celzard
Publicado en: Materials, Edición 11/5, 2018, Página(s) 709, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma11050709

Modeling the electrical properties of three-dimensional printed meshes with the theory of resistor lattices

Autores: Alexander V. Melnikov, Mikhail Shuba, Philippe Lambin
Publicado en: Physical Review E, Edición 97/4, 2018, Página(s) 11, ISSN 2470-0045
Editor: American Physical Society
DOI: 10.1103/PhysRevE.97.043307

Localized plasmon resonance in boron-doped multiwalled carbon nanotubes

Autores: M. V. Shuba, D. I. Yuko, P. P. Kuzhir, S. A. Maksimenko, G. G. Chigir, A. N. Pyatlitski, O. V. Sedelnikova, A. V. Okotrub, Ph. Lambin
Publicado en: Physical Review B, Edición 97/20, 2018, Página(s) 205427, ISSN 2469-9950
Editor: American Physical Society
DOI: 10.1103/PhysRevB.97.205427

Release of Graphene and Carbon Nanotubes from Biodegradable Poly(Lactic Acid) Films during Degradation and Combustion: Risk Associated with the End-of-Life of Nanocomposite Food Packaging Materials

Autores: Stanislav Kotsilkov, Evgeni Ivanov, Nikolay Vitanov
Publicado en: Materials, Edición 11/12, 2018, Página(s) 2346, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma11122346

Nanoindentation analysis of 3D printed poly(lactic acid)-based composites reinforced with graphene and multiwall carbon nanotubes

Autores: Todor Batakliev, Vladimir Georgiev, Evgeni Ivanov, Rumiana Kotsilkova, Rosa Di Maio, Clara Silvestre, Sossio Cimmino
Publicado en: Journal of Applied Polymer Science, Edición 01 November 2018, 2018, Página(s) 47260, ISSN 0021-8995
Editor: John Wiley & Sons Inc.
DOI: 10.1002/app.47260

Rheological study of poly(lactic) acid nanocomposites with carbon nanotubes and graphene additives as a tool for materials characterization for 3D printing application

Autores: Radost Ivanova, Rumiana Kotsilkova
Publicado en: Applied Rheology, Edición July 16, 2018 (28:5, 2018), 2018, Página(s) 54014 -1/10, ISSN 1430-6395
Editor: Vincentz Verlag
DOI: 10.3933/applrheol-28-54014

Morphological, Rheological and Electromagnetic Properties of Nanocarbon/Poly(lactic) Acid for 3D Printing: Solution Blending vs. Melt Mixing

Autores: Giovanni Spinelli, Patrizia Lamberti, Vincenzo Tucci, Rumiana Kotsilkova, Sonia Tabakova, Radost Ivanova, Polya Angelova, Verislav Angelov, Evgeni Ivanov, Rosa Di Maio, Clara Silvestre, Darya Meisak, Alesia Paddubskaya, Polina Kuzhir
Publicado en: Materials, Edición 11/11, 2018, Página(s) 2256, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma11112256

Effect of boron and nitrogen additives on structure and transport properties of arc-produced carbon

Autores: O.V. Sedelnikova, Yu.V. Fedoseeva, A.I. Romanenko, A.V. Gusel'nikov, O.Yu. Vilkov, E.A. Maksimovskiy, D.S. Bychanok, P.P. Kuzhir, L.G. Bulusheva, A.V. Okotrub
Publicado en: Carbon, Edición 143, 2019, Página(s) 660-668, ISSN 0008-6223
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.carbon.2018.11.071

Synergetic effect of triglycine sulfate and graphite nanoplatelets on dielectric and piezoelectric properties of epoxy resin composites

Autores: Artyom Plyushch, Jan Macutkevic, Vytautas Samulionis, Juras Banys, Dzmitry Bychanok, Polina Kuzhir, Sandrine Mathieu, Vanessa Fierro, Alain Celzard
Publicado en: Polymer Composites, Edición 18 July 2018, 2018, Página(s) 15-26, ISSN 0272-8397
Editor: John Wiley & Sons Inc.
DOI: 10.1002/pc.24932

Numerical Simulation of the Percolation Threshold in Non-Overlapping Ellipsoid Composites: Toward Bottom-Up Approach for Carbon Based Electromagnetic Components Realization

Autores: Artyom Plyushch, Patrizia Lamberti, Giovanni Spinelli, Jan Macutkevič, Polina Kuzhir
Publicado en: Applied Sciences, Edición 8/6, 2018, Página(s) 882, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app8060882

Ultra-Light Reduced Graphene Oxide Based Aerogel/Foam Absorber of Microwave Radiation

Autores: Artyom Plyushch, Tianliang Zhai, Hesheng Xia, Chiara Santillo, Letizia Verdolotti , Marino Lavorgna, Polina Kuzhir
Publicado en: "Materials / Special Edición ""Carbon Based Functional Microwave Shields""", Edición Materials 2019, 12(2), 213, 2019, Página(s) 2-10, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma12020213

Effects of Graphene Nanoplatelets and Multiwall Carbon Nanotubes on the Structure and Mechanical Properties of Poly(lactic acid) Composites: A Comparative Study

Autores: Todor Batakliev, Ivanka Petrova-Doycheva, Verislav Angelov, Vladimir Georgiev, Evgeni Ivanov, Rumiana Kotsilkova, Marcello Casa, Claudia Cirillo, Renata Adami, Maria Sarno, Paolo Ciambelli
Publicado en: Applied Sciences, Edición 9/3, 2019, Página(s) 469, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app9030469

Electrokinetic Properties of 3D-Printed Conductive Lattice Structures

Autores: Philippe Lambin, Alexander Melnikov, Mikhail Shuba
Publicado en: Applied Sciences, Edición 9/3, 2019, Página(s) 541, ISSN 2076-3417
Editor: MDFI
DOI: 10.3390/app9030541

Rheological and electrical behaviour of nanocarbon/poly(lactic) acid for 3D printing applications

Autores: Giovanni Spinelli, Patrizia Lamberti, Vincenzo Tucci, Radost Ivanova, Sonia Tabakova, Evgeni Ivanov, Rumiana Kotsilkova, Sossio Cimmino, Rosa Di Maio, Clara Silvestre
Publicado en: Composites Part B: Engineering, Edición 167, 2019, Página(s) 467-476, ISSN 1359-8368
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2019.03.021

Restoring self-limited growth of single-layer graphene on copper foil via backside coating

Autores: Nicolas Reckinger, Marcello Casa, Jeroen E. Scheerder, Wout Keijers, Matthieu Paillet, Jean-Roch Huntzinger, Emile Haye, Alexandre Felten, Joris Van de Vondel, Maria Sarno, Luc Henrard, Jean-François Colomer
Publicado en: Nanoscale, Edición 11/11, 2019, Página(s) 5094-5101, ISSN 2040-3364
Editor: Royal Society of Chemistry
DOI: 10.1039/c8nr09841g

Selective Laser Sintering Fabricated Thermoplastic Polyurethane/Graphene Cellular Structures with Tailorable Properties and High Strain Sensitivity

Autores: Alfredo Ronca, Gennaro Rollo, Pierfrancesco Cerruti, Guoxia Fei, Xinpeng Gan, Giovanna Buonocore, Marino Lavorgna, Hesheng Xia, Clara Silvestre, Luigi Ambrosio
Publicado en: Applied Sciences, Edición 9/5, 2019, Página(s) 864, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app9050864

PLA/Graphene/MWCNT Composites with Improved Electrical and Thermal Properties Suitable for FDM 3D Printing Applications

Autores: Ivanov, Evgeni Kotsilkova, Rumiana; Xia, Hesheng ; Chen, Yinghong ; Donato, Ricardo ; Donato, Katarzyna ; Godoy, Anna Paula ; Di Maio, Rosa ; Silvestre, Clara ; Cimmino, Sossio; Verislav Angelov
Publicado en: Appl. Sci. 2019 , 9 , 1209, Edición 9; 22 March 2019, 2019, Página(s) 14, ISSN 2076-3417
Editor: MDPI
DOI: 10.3390/app9061209

Carbon nanotubes vs graphene nanoplatelets for 3D-printable composites

Autores: G. Gorokhov, D. Bychanok, D. Meisak, I. Shlyk, A. Liubimau, P. Angelova, C. Menseidov, E. Ivanov, R. Kotsilkova, M. Casa, P. Ciambelli, P. Kuzhir
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 503, 2019, Página(s) 012010, ISSN 1757-899X
Editor: IOP publishing
DOI: 10.1088/1757-899x/503/1/012010

Exploring thermal annealing and graphene-carbon nanotube additives to enhance crystallinity, thermal, electrical and tensile properties of aged poly(lactic) acid-based filament for 3D printing

Autores: Rumiana Kotsilkova, Ivanka Petrova-Doycheva, Dzhihan Menseidov, Evgeni Ivanov, Alesya Paddubskaya, Polina Kuzhir
Publicado en: Composites Science and Technology, Edición 181, 2019, Página(s) 107712, ISSN 0266-3538
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2019.107712

Frequency and density dependencies of the electromagnetic parameters of carbon nanotube and graphene nanoplatelet based composites in the microwave and terahertz ranges

Autores: M V Shuba, D I Yuko, G Gorokhov, D Meisak, D S Bychanok, P P Kuzhir, S A Maksimenko, P Angelova, E Ivanov, R Kotsilkova
Publicado en: Materials Research Express, Edición 6/9, 2019, Página(s) 095050, ISSN 2053-1591
Editor: IOP Publishing
DOI: 10.1088/2053-1591/ab2edf

Stretching and Tunability of Graphene-Based Passive Terahertz Components

Autores: Konstantin G. Batrakov, Nadezhda I. Volynets, Alesia G. Paddubskaya, Polina P. Kuzhir, Maria Stella Prete, Olivia Pulci, Evgeni Ivanov, Rumiana Kotsilkova, Tommi Kaplas, Yuri Svirko
Publicado en: physica status solidi (b), Edición 28 June 2019, 2019, Página(s) 1800683, ISSN 0370-1972
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/pssb.201800683

Nanocarbon/Poly(Lactic) Acid for 3D Printing: Effect of Fillers Content on Electromagnetic and Thermal Properties

Autores: Giovanni Spinelli, Patrizia Lamberti, Vincenzo Tucci, Rumiana Kotsilkova, Evgeni Ivanov, Dzhihan Menseidov, Carlo Naddeo, Vittorio Romano, Liberata Guadagno, Renata Adami, Darya Meisak, Dzmitry Bychanok, Polina Kuzhir
Publicado en: Materials, Edición 12/15, 2019, Página(s) 2369, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma12152369

Simultaneous realization of conductive segregation network microstructure and minimal surface porous macrostructure by SLS 3D printing

Autores: Xinpeng Gan, Jinzhi Wang, Zhanhua Wang, Zhuo Zheng, Marino Lavorgna, Alfredo Ronca, Guoxia Fei, Hesheng Xia
Publicado en: Materials & Design, Edición 178, 2019, Página(s) 107874, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2019.107874

Electromagnetic properties of chloroprene rubber after long-term ultraviolet ageing, oil immersion and thermal degradation

Autores: R Sela, D Bychanok, Y Padrez, D Adamchuk, V Ksenevich, N Naveh, P Kuzhir
Publicado en: Materials Research Express, Edición 6/7, 2019, Página(s) 075327, ISSN 2053-1591
Editor: IOP Publishing
DOI: 10.1088/2053-1591/ab1574

Preparation and 3D-printing of highly conductive polylactic acid/carbon nanotube nanocomposites via local enrichment strategy

Autores: Shaohong Shi, Yinghong Chen, Jingjing Jing, Lu Yang
Publicado en: RSC Advances, Edición 9/51, 2019, Página(s) 29980-29986, ISSN 2046-2069
Editor: Royal Society of Chemistry
DOI: 10.1039/c9ra05684j

Alignment of polymer based magnetic composites in magnetic field

Autores: A.V. Kukhta, P.P. Kuzhir, S.A. Maksimenko, S.A. Vorobyova, I.N. Kukhta, A.E. Pochtenny, M.I. Taoubi, S. Bistarelli, S. Bellucci
Publicado en: Progress in Organic Coatings, Edición 137, 2019, Página(s) 105366, ISSN 0300-9440
Editor: Elsevier BV
DOI: 10.1016/j.porgcoat.2019.105366

Rheological behavior of graphene/epoxy nanodispersions

Autores: Ivanov E, Velichkova H, Kotsilkova R, Bistarelli S, Cataldo A, Micciulla F, Bellucci S.
Publicado en: Applied Rheology, Edición 27 (2017) 24469, 2017, Página(s) 24469, ISSN 1617-8106
Editor: Kerschensteiner Verlag GmbH
DOI: 10.3933/ApplRheol-27-24469

Effects of Filament Extrusion, 3D Printing and Hot-Pressing on Electrical and Tensile Properties of Poly(Lactic) Acid Composites Filled with Carbon Nanotubes and Graphene

Autores: Giovanni Spinelli, Rumiana Kotsilkova, Evgeni Ivanov, Ivanka Petrova-Doycheva, Dzhihan Menseidov, Vladimir Georgiev, Rosa Di Maio, Clara Silvestre
Publicado en: Nanomaterials, Edición 10/1, 2020, Página(s) 35, ISSN 2079-4991
Editor: MDPI
DOI: 10.3390/nano10010035

Release of carbon nanoparticles of different size and shape from nanocomposite poly(lactic) acid film into food simulants

Autores: Hristiana Velichkova, Stanislav Kotsilkov, Evgeni Ivanov, Rumiana Kotsilkova, Stanislav Gyoshev, Nikolay Stoimenov, Nikolay K. Vitanov
Publicado en: Food Additives & Contaminants: Part A, Edición 34/6, 2017, Página(s) 1072-1085, ISSN 1944-0049
Editor: Taylor and Francis
DOI: 10.1080/19440049.2017.1310396

Graphene as a Prototypical Model for Two-Dimensional Continuous Mechanics

Autores: Philippe Lambin
Publicado en: Applied Sciences, Edición 7/8, 2017, Página(s) 830, ISSN 2076-3417
Editor: MDI
DOI: 10.3390/app7080830

Batakliev, T.; Ivanov, E.; Angelov, V.; Spinelli, G.; Kotsilkova, R. Advanced Nanomechanical Characterization of Biopolymer Films Containing GNPs and MWCNTs in Hybrid Composite Structure. Nanomaterials 2022, 12, 709

Autores: Batakliev, T.; Ivanov, E.; Angelov, V.; Spinelli, G.; Kotsilkova, R.
Publicado en: Nanomaterials, Edición 12, 2022, Página(s) 17, ISSN 2079-4991
Editor: MDPI
DOI: 10.3390/nano12040709

Synergistic Effect of Graphene Nanoplatelets and Multiwall Carbon Nanotubes Incorporated in PLA Matrix: Nanoindentation of Composites with Improved Mechanical Properties

Autores: Todor Batakliev, Vladimir Georgiev, Verislav Angelov, Evgeni Ivanov, Cristiane Kalupgian, Pablo A. R. Muñoz, Guilhermino J. M. Fechine, Ricardo J. E. Andrade, Rumiana Kotsilkova
Publicado en: Journal of Materials Engineering and Performance, Edición Vol 30 (5), 2021, Página(s) 9, ISSN 1059-9495
Editor: ASM International
DOI: 10.1007/s11665-021-05679-3

On the Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets to Enhance the Functional Properties of SLS 3D-Printed Elastomeric Structures

Autores: Gennaro Rollo, Alfredo Ronca, Pierfrancesco Cerruti, Xin Peng Gan, Guoxia Fei, Hesheng Xia, Gleb Gorokhov, Dzmitry Bychanok, Polina Kuzhir, Marino Lavorgna, Luigi Ambrosio
Publicado en: Polymers, Edición 12/8, 2020, Página(s) 1841, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym12081841

Robust design of compact microwave absorbers and waveguide matched loads based on DC-conductive 3D-printable filament

Autores: D Meisak, E Gurnevich, A Plyushch, D Bychanok, V Georgiev, R Kotsilkova, P Kuzhir
Publicado en: Journal of Physics D: Applied Physics, Edición 53/30, 2020, Página(s) 305301, ISSN 0022-3727
Editor: Institute of Physics Publishing
DOI: 10.1088/1361-6463/ab86e6

THz and microwave properties of 3D-printed nanocarbon based multilayers

Autores: P. Kuzhir, A. Paddubskaya, N. Volynets, R. Kotsilkova, E. Ivanov, I. Biro, G. I. Mark, L. P. Biro, S. Maksimenko
Publicado en: 2017 International Conference on Electromagnetics in Advanced Applications (ICEAA), Edición 11-15 Sept. 2017, Verona, Italy, 2017, Página(s) 822-823, ISBN 978-1-5090-4451-1
Editor: IEEE
DOI: 10.1109/ICEAA.2017.8065377

Electromagnetic Response Of A One-Dimensional Chain Of Interconnected Carbon Nanotubes In The Sub-Terahertz Range

Autores: A. V. Melnikov, M. V. Shuba
Publicado en: "International Conference on Physics, Chemistry and Application of Nanostructures ""Nanomeeting-2017"",", Edición 30 May – 2 June 2017, 2017, Página(s) 183-186, ISBN 978-981-3224-52-0
Editor: WORLD SCIENTIFIC
DOI: 10.1142/9789813224537_0043

Morphological, rheological and electrical study of PLA reinforced with carbon-based fillers for 3D printing applications

Autores: Luigi Egiziano, Patrizia Lamberti, Giovanni Spinelli, Vincenzo Tucci, Rumiana Kotsilkova, Sonia Tabakova, Evgeni Ivanov, Clara Silvestre, Rosa Di Maio
Publicado en: AIP Conference Proceedings volume 1981, Edición 11 July 2018; 9TH INTERNATIONAL CONFERENCE ON “TIMES OF POLYMERS AND COMPOSITES”: From Aerospace to Nanotechnology, 2018, Página(s) 020152, ISBN 978-0-7354-1697-0
Editor: American Institute of Physics
DOI: 10.1063/1.5046014

Evaluation of thermal and electrical conductivity of carbon-based PLA nanocomposites for 3D printing

Autores: Patrizia Lamberti, Giovanni Spinelli, Polina P. Kuzhir, Liberata Guadagno, Carlo Naddeo, Vittorio Romano, Rumania Kotsilkova, Polya Angelova, Vlado Georgiev
Publicado en: AIP Conference Proceedings volume 1981, Edición Jul 11, 2018, 2018, Página(s) 020158
Editor: American Institute of Physics
DOI: 10.1063/1.5046020

Electrodynamics of graphene heterostructures and electromagnetic applications

Autores: Philippe Lambin, Bruno Majerus, Michael Lobet, Michael Sarrazin, Mirko Cormann, Tommi Kaplas, Yuri Svirko, Alesia Paddubskaya, Konstantin Batrakov, Polina Kuzhir
Publicado en: 2018 International Conference on Electromagnetics in Advanced Applications (ICEAA), Edición Date Added to IEEE Xplore: 05 November 2018, 2018, Página(s) 47-50, ISBN 978-1-5386-6762-0
Editor: IEEE
DOI: 10.1109/iceaa.2018.8520341

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página

Descargar