Multifunctional Graphene-based Nanocomposites with Robust Electromagnetic and Thermal Properties for 3D-printing Application

Livrables

Rheological methodology, optimized processing

Report on Rheological methodology and optimized processing of nanocomposites

Data Sheet of maximum improved nanocomposite mechanical, thermal, electrical and electromagnetic properties

Data Sheet of maximum improved nanocomposite mechanical, thermal, electrical and electromagnetic properties The scientific leadership will be undertaken by INP-BSU

Design of spongy structures with optimized permeability and heat transfer capability

Design of spongy open structures based on the novel material for 3D-printing to be used for electromagnetic shielding, with optimized permeability and heat transfer capability

Materials synthesis and nanocomposite fabrication

Materials synthesis and nanocomposite fabrication test samples to provide for other WPs

Robust nanocomposite design tool
Report on Dissemination, Communication and Outreach activities

This Deliverable D92 will be presented in two stages First Stage Report will be presented at month 24 Final report will be delivered at Month 45

Design of foam-like open closed-shell structures with optimized lightness and mechanical robustness

Design of foamlike closedshell structures based on the novel material for 3Dprinting to be used for electromagnetic shielding with optimized lightness and mechanical robustness

Report on Project Meetings and Networking

This Deliverable Report will be presented in two stages: - First Stage Report will be presented at month 30; - Final report will be delivered at month 46.

Report of essential nanostructure parameters

Graphene 3D Website and Flyer

This Deliverable Report D91 will be presented in Month 3 and will be regulary upgraded to Month 48

Set up Joint Laboratory on Graphene/Polymer Research

"The resposible partners of the D9.5 ""Set up of Joint Laboratory on graphene-polymer research"" will be IMeh and CNR."

Publications

Facile and scalable fabrication of highly thermal conductive polyethylene/graphene nanocomposites by combining solid-state shear milling and FDM 3D-printing aligning methods

Auteurs: Jingjing Jing, Yinghong Chen, Shaohong Shi, Lu Yang, Philippe Lambin
Publié dans: Chemical Engineering Journal, Numéro 402, 2020, Page(s) 126218, ISSN 1385-8947
Éditeur: Elsevier BV
DOI: 10.1016/j.cej.2020.126218

3D Printing of Delicately Controllable Cellular Nanocomposites Based on Polylactic Acid Incorporating Graphene/Carbon Nanotube Hybrids for Efficient Electromagnetic Interference Shielding

Auteurs: Shaohong Shi, Zilin Peng, Jingjing Jing, Lu Yang, Yinghong Chen
Publié dans: ACS Sustainable Chemistry & Engineering, Numéro 8/21, 2020, Page(s) 7962-7972, ISSN 2168-0485
Éditeur: American Chemical Society
DOI: 10.1021/acssuschemeng.0c01877

Spinelli, G.; Guarini, R.; Kotsilkova, R.; Batakliev, T.; Ivanov, E.; Romano, V. Experimental and Simulation Studies of Temperature Effect on Thermophysical Properties of Graphene-Based Polylactic Acid. Materials 2022, 15, 986

Auteurs: Spinelli, G.; Guarini, R.; Kotsilkova, R.; Batakliev, T.; Ivanov, E.; Romano, V
Publié dans: Materials, Numéro 15, 2022, Page(s) 23, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma15030986

Thermal and Electromagnetic Properties of Polymer Holey Structures Produced by Additive Manufacturing

Auteurs: Philippe Lambin, Aliaksandr Liubimau, Dzmitry Bychanok, Luca Vitale, Polina Kuzhir
Publié dans: Polymers, Numéro 12/12, 2020, Page(s) 2892, ISSN 2073-4360
Éditeur: MDPI
DOI: 10.3390/polym12122892

Polyethylene Composites with Segregated Carbon Nanotubes Network: Low Frequency Plasmons and High Electromagnetic Interference Shielding Efficiency

Auteurs: Ludmila Vovchenko, Ludmila Matzui, Viktor Oliynyk, Yurii Milovanov, Yevgen Mamunya, Nadezhda Volynets, Artyom Plyushch, Polina Kuzhir
Publié dans: Materials, Numéro 13/5, 2020, Page(s) 1118, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma13051118

Facile fabrication of lightweight porous FDM-Printed polyethylene/graphene nanocomposites with enhanced interfacial strength for electromagnetic interference shielding

Auteurs: Jingjing Jing, Yu Xiong, Shaohong Shi, Haoran Pei, Yinghong Chen, Philippe Lambin
Publié dans: Composites Science and Technology, Numéro 207, 2021, Page(s) 108732, ISSN 0266-3538
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2021.108732

Terahertz Optics of Materials with Spatially Harmonically Distributed Refractive Index

Auteurs: Dzmitry Bychanok, Gleb Gorokhov, Artyom Plyushch, Alfredo Ronca, Marino Lavorgna, Hesheng Xia, Patrizia Lamberti, Polina Kuzhir
Publié dans: Materials, Numéro 13/22, 2020, Page(s) 5208, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma13225208

Experimental, Theoretical and Simulation Studies on the Thermal Behavior of PLA-Based Nanocomposites Reinforced with Different Carbonaceous Fillers

Auteurs: Giovanni Spinelli, Rosella Guarini, Rumiana Kotsilkova, Evgeni Ivanov, Vittorio Romano
Publié dans: Nanomaterials, Numéro 11/6, 2021, Page(s) 1511, ISSN 2079-4991
Éditeur: MDPI
DOI: 10.3390/nano11061511

Evaluation of the macromechanical properties of PLA-based nanocomposites by means of three-point bending method

Auteurs: Todor Batakliev
Publié dans: Journal of Theoretical and Applied Mechanics, Numéro 51, 1, 2021, Page(s) 22-34, ISSN 0861-6663
Éditeur: Bulgarian Academy of Sciences, Marin Drinov Publishing House

Essential Nanostructure Parameters to Govern Reinforcement and Functionality of Poly(lactic) Acid Nanocomposites with Graphene and Carbon Nanotubes for 3D Printing Application

Auteurs: Rumiana Kotsilkova, Evgeni Ivanov, Vladimir Georgiev, Radost Ivanova, Dzhihan Menseidov, Todor Batakliev, Verislav Angelov, Hesheng Xia, Yinghong Chen, Dzmitry Bychanok, Polina Kuzhir, Rosa Di Maio, Clara Silvestre, Sossio Cimmino
Publié dans: Polymers, Numéro 12/6, 2020, Page(s) 1208, ISSN 2073-4360
Éditeur: MDPI
DOI: 10.3390/polym12061208

Preparation of Highly Efficient Electromagnetic Interference Shielding Polylactic Acid/Graphene Nanocomposites for Fused Deposition Modeling Three-Dimensional Printing

Auteurs: Shaohong Shi, Zilin Peng, Jingjing Jing, Lu Yang, Yinghong Chen, Rumiana Kotsilkova, Evgeni Ivanov
Publié dans: Industrial & Engineering Chemistry Research, Numéro 59/35, 2020, Page(s) 15565-15575, ISSN 0888-5885
Éditeur: American Chemical Society
DOI: 10.1021/acs.iecr.0c02400

Composition dependence in surface properties of poly(lactic acid)/graphene/carbon nanotube composites

Auteurs: Radost Ivanova, Rumiana Kotsilkova, Evgeni Ivanov, Ricardo K. Donato, Guilhermino J.M. Fechine, Ricardo J.E. Andrade, Rosa di Maio, Clara Silvestre
Publié dans: Materials Chemistry and Physics, Numéro 249, 2020, Page(s) 122702, ISSN 0254-0584
Éditeur: Elsevier BV
DOI: 10.1016/j.matchemphys.2020.122702

THz Spectroscopy as a Versatile Tool for Filler Distribution Diagnostics in Polymer Nanocomposites

Auteurs: Gleb Gorokhov, Dzmitry Bychanok, Igor Gayduchenko, Yuriy Rogov, Elena Zhukova, Sergei Zhukov, Lenar Kadyrov, Georgy Fedorov, Evgeni Ivanov, Rumiana Kotsilkova, Jan Macutkevic, Polina Kuzhir
Publié dans: Polymers, Numéro 12/12, 2020, Page(s) 3037, ISSN 2073-4360
Éditeur: MDPI
DOI: 10.3390/polym12123037

Dielectric Spectroscopy and Thermal Properties of Poly(lactic) Acid Reinforced with Carbon-Based Particles: Experimental Study and Design Theory

Auteurs: Giovanni Spinelli, Rumiana Kotsilkova, Evgeni Ivanov, Vladimir Georgiev, Radost Ivanova, Carlo Naddeo, Vittorio Romano
Publié dans: Polymers, Numéro 12/10, 2020, Page(s) 2414, ISSN 2073-4360
Éditeur: MDPI
DOI: 10.3390/polym12102414

Influence of polymer swelling and dissolution into food simulants on the release of graphene nanoplates and carbon nanotubes from poly(lactic) acid and polypropylene composite films

Auteurs: Hristiana Velichkova, Ivanka Petrova, Stanislav Kotsilkov, Evgeni Ivanov, Nikolay K. Vitanov, Rumiana Kotsilkova
Publié dans: Journal of Applied Polymer Science, Numéro 134/44, 2017, Page(s) 45469, ISSN 0021-8995
Éditeur: John Wiley & Sons Inc.
DOI: 10.1002/app.45469

Recent Applications of Ionic Liquids in the Sol-Gel Process for Polymer–Silica Nanocomposites with Ionic Interfaces

Auteurs: Katarzyna Donato, Libor Matějka, Raquel Mauler, Ricardo Donato
Publié dans: Colloids and Interfaces, Numéro 1/1, 2018, Page(s) 5, ISSN 2504-5377
Éditeur: MDPI AG
DOI: 10.3390/colloids1010005

Fully carbon metasurface: Absorbing coating in microwaves

Auteurs: D. Bychanok, S. Li, G. Gorokhov, K. Piasotski, D. Meisak, P. Kuzhir, E. A. Burgess, C. P. Gallagher, F. Y. Ogrin, A. P. Hibbins, A. Pasc, A. Sanchez-Sanchez, V. Fierro, A. Celzard
Publié dans: Journal of Applied Physics, Numéro 121/16, 2017, Page(s) 165103, ISSN 0021-8979
Éditeur: American Institute of Physics
DOI: 10.1063/1.4982232

Influence of carbon nanotube surface treatment on resistivity and low-frequency noise characteristics of epoxy-based composites

Auteurs: Marina Tretjak, Sandra Pralgauskaitė, Jan Macutkevic, Jonas Matukas, Juras Banys, Polina Kuzhir, Evgeni Ivanov, Rumiana Kotsilkova
Publié dans: Polymer Composites, Numéro 5 March 2018, 2018, Page(s) 7, ISSN 0272-8397
Éditeur: John Wiley & Sons Inc.
DOI: 10.1002/pc.24775

Terahertz absorption in graphite nanoplatelets/polylactic acid composites

Auteurs: D Bychanok, P Angelova, A Paddubskaya, D Meisak, L Shashkova, M Demidenko, A Plyushch, E Ivanov, R Krastev, R Kotsilkova, F Y Ogrin, P Kuzhir
Publié dans: Journal of Physics D: Applied Physics, Numéro 51/14, 2018, Page(s) 145307, ISSN 0022-3727
Éditeur: Institute of Physics Publishing
DOI: 10.1088/1361-6463/aab1a5

Experimental and theoretical study on piezoresistive properties of a structural resin reinforced with carbon nanotubes for strain sensing and damage monitoring

Auteurs: Giovanni Spinelli, Patrizia Lamberti, Vincenzo Tucci, Luigi Vertuccio, Liberata Guadagno
Publié dans: Composites Part B: Engineering, Numéro 145, 2018, Page(s) 90-99, ISSN 1359-8368
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2018.03.025

Carbon-Coated Nickel Nanoparticles: Effect on the Magnetic and Electric Properties of Composite Materials

Auteurs: Artyom Plyushch, Jan Macutkevič, Jūras Banys, Polina Kuzhir, Nikolay Kalanda, Alexander Petrov, Clara Silvestre, Mikhail Uimin, Anatoly Yermakov, Olga Shenderova
Publié dans: Coatings, Numéro 8/5, 2018, Page(s) 165, ISSN 2079-6412
Éditeur: MDPI
DOI: 10.3390/coatings8050165

Structure and Electromagnetic Properties of Cellular Glassy Carbon Monoliths with Controlled Cell Size

Auteurs: Andrzej Szczurek, Vanessa Fierro, Artyom Plyushch, Jan Macutkevic, Polina Kuzhir, Alain Celzard
Publié dans: Materials, Numéro 11/5, 2018, Page(s) 709, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma11050709

Modeling the electrical properties of three-dimensional printed meshes with the theory of resistor lattices

Auteurs: Alexander V. Melnikov, Mikhail Shuba, Philippe Lambin
Publié dans: Physical Review E, Numéro 97/4, 2018, Page(s) 11, ISSN 2470-0045
Éditeur: American Physical Society
DOI: 10.1103/PhysRevE.97.043307

Localized plasmon resonance in boron-doped multiwalled carbon nanotubes

Auteurs: M. V. Shuba, D. I. Yuko, P. P. Kuzhir, S. A. Maksimenko, G. G. Chigir, A. N. Pyatlitski, O. V. Sedelnikova, A. V. Okotrub, Ph. Lambin
Publié dans: Physical Review B, Numéro 97/20, 2018, Page(s) 205427, ISSN 2469-9950
Éditeur: American Physical Society
DOI: 10.1103/PhysRevB.97.205427

Release of Graphene and Carbon Nanotubes from Biodegradable Poly(Lactic Acid) Films during Degradation and Combustion: Risk Associated with the End-of-Life of Nanocomposite Food Packaging Materials

Auteurs: Stanislav Kotsilkov, Evgeni Ivanov, Nikolay Vitanov
Publié dans: Materials, Numéro 11/12, 2018, Page(s) 2346, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma11122346

Nanoindentation analysis of 3D printed poly(lactic acid)-based composites reinforced with graphene and multiwall carbon nanotubes

Auteurs: Todor Batakliev, Vladimir Georgiev, Evgeni Ivanov, Rumiana Kotsilkova, Rosa Di Maio, Clara Silvestre, Sossio Cimmino
Publié dans: Journal of Applied Polymer Science, Numéro 01 November 2018, 2018, Page(s) 47260, ISSN 0021-8995
Éditeur: John Wiley & Sons Inc.
DOI: 10.1002/app.47260

Rheological study of poly(lactic) acid nanocomposites with carbon nanotubes and graphene additives as a tool for materials characterization for 3D printing application

Auteurs: Radost Ivanova, Rumiana Kotsilkova
Publié dans: Applied Rheology, Numéro July 16, 2018 (28:5, 2018), 2018, Page(s) 54014 -1/10, ISSN 1430-6395
Éditeur: Vincentz Verlag
DOI: 10.3933/applrheol-28-54014

Morphological, Rheological and Electromagnetic Properties of Nanocarbon/Poly(lactic) Acid for 3D Printing: Solution Blending vs. Melt Mixing

Auteurs: Giovanni Spinelli, Patrizia Lamberti, Vincenzo Tucci, Rumiana Kotsilkova, Sonia Tabakova, Radost Ivanova, Polya Angelova, Verislav Angelov, Evgeni Ivanov, Rosa Di Maio, Clara Silvestre, Darya Meisak, Alesia Paddubskaya, Polina Kuzhir
Publié dans: Materials, Numéro 11/11, 2018, Page(s) 2256, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma11112256

Effect of boron and nitrogen additives on structure and transport properties of arc-produced carbon

Auteurs: O.V. Sedelnikova, Yu.V. Fedoseeva, A.I. Romanenko, A.V. Gusel'nikov, O.Yu. Vilkov, E.A. Maksimovskiy, D.S. Bychanok, P.P. Kuzhir, L.G. Bulusheva, A.V. Okotrub
Publié dans: Carbon, Numéro 143, 2019, Page(s) 660-668, ISSN 0008-6223
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.carbon.2018.11.071

Synergetic effect of triglycine sulfate and graphite nanoplatelets on dielectric and piezoelectric properties of epoxy resin composites

Auteurs: Artyom Plyushch, Jan Macutkevic, Vytautas Samulionis, Juras Banys, Dzmitry Bychanok, Polina Kuzhir, Sandrine Mathieu, Vanessa Fierro, Alain Celzard
Publié dans: Polymer Composites, Numéro 18 July 2018, 2018, Page(s) 15-26, ISSN 0272-8397
Éditeur: John Wiley & Sons Inc.
DOI: 10.1002/pc.24932

Numerical Simulation of the Percolation Threshold in Non-Overlapping Ellipsoid Composites: Toward Bottom-Up Approach for Carbon Based Electromagnetic Components Realization

Auteurs: Artyom Plyushch, Patrizia Lamberti, Giovanni Spinelli, Jan Macutkevič, Polina Kuzhir
Publié dans: Applied Sciences, Numéro 8/6, 2018, Page(s) 882, ISSN 2076-3417
Éditeur: MDPI
DOI: 10.3390/app8060882

Ultra-Light Reduced Graphene Oxide Based Aerogel/Foam Absorber of Microwave Radiation

Auteurs: Artyom Plyushch, Tianliang Zhai, Hesheng Xia, Chiara Santillo, Letizia Verdolotti , Marino Lavorgna, Polina Kuzhir
Publié dans: "Materials / Special Numéro ""Carbon Based Functional Microwave Shields""", Numéro Materials 2019, 12(2), 213, 2019, Page(s) 2-10, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma12020213

Effects of Graphene Nanoplatelets and Multiwall Carbon Nanotubes on the Structure and Mechanical Properties of Poly(lactic acid) Composites: A Comparative Study

Auteurs: Todor Batakliev, Ivanka Petrova-Doycheva, Verislav Angelov, Vladimir Georgiev, Evgeni Ivanov, Rumiana Kotsilkova, Marcello Casa, Claudia Cirillo, Renata Adami, Maria Sarno, Paolo Ciambelli
Publié dans: Applied Sciences, Numéro 9/3, 2019, Page(s) 469, ISSN 2076-3417
Éditeur: MDPI
DOI: 10.3390/app9030469

Electrokinetic Properties of 3D-Printed Conductive Lattice Structures

Auteurs: Philippe Lambin, Alexander Melnikov, Mikhail Shuba
Publié dans: Applied Sciences, Numéro 9/3, 2019, Page(s) 541, ISSN 2076-3417
Éditeur: MDFI
DOI: 10.3390/app9030541

Rheological and electrical behaviour of nanocarbon/poly(lactic) acid for 3D printing applications

Auteurs: Giovanni Spinelli, Patrizia Lamberti, Vincenzo Tucci, Radost Ivanova, Sonia Tabakova, Evgeni Ivanov, Rumiana Kotsilkova, Sossio Cimmino, Rosa Di Maio, Clara Silvestre
Publié dans: Composites Part B: Engineering, Numéro 167, 2019, Page(s) 467-476, ISSN 1359-8368
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2019.03.021

Restoring self-limited growth of single-layer graphene on copper foil via backside coating

Auteurs: Nicolas Reckinger, Marcello Casa, Jeroen E. Scheerder, Wout Keijers, Matthieu Paillet, Jean-Roch Huntzinger, Emile Haye, Alexandre Felten, Joris Van de Vondel, Maria Sarno, Luc Henrard, Jean-François Colomer
Publié dans: Nanoscale, Numéro 11/11, 2019, Page(s) 5094-5101, ISSN 2040-3364
Éditeur: Royal Society of Chemistry
DOI: 10.1039/c8nr09841g

Selective Laser Sintering Fabricated Thermoplastic Polyurethane/Graphene Cellular Structures with Tailorable Properties and High Strain Sensitivity

Auteurs: Alfredo Ronca, Gennaro Rollo, Pierfrancesco Cerruti, Guoxia Fei, Xinpeng Gan, Giovanna Buonocore, Marino Lavorgna, Hesheng Xia, Clara Silvestre, Luigi Ambrosio
Publié dans: Applied Sciences, Numéro 9/5, 2019, Page(s) 864, ISSN 2076-3417
Éditeur: MDPI
DOI: 10.3390/app9050864

PLA/Graphene/MWCNT Composites with Improved Electrical and Thermal Properties Suitable for FDM 3D Printing Applications

Auteurs: Ivanov, Evgeni Kotsilkova, Rumiana; Xia, Hesheng ; Chen, Yinghong ; Donato, Ricardo ; Donato, Katarzyna ; Godoy, Anna Paula ; Di Maio, Rosa ; Silvestre, Clara ; Cimmino, Sossio; Verislav Angelov
Publié dans: Appl. Sci. 2019 , 9 , 1209, Numéro 9; 22 March 2019, 2019, Page(s) 14, ISSN 2076-3417
Éditeur: MDPI
DOI: 10.3390/app9061209

Carbon nanotubes vs graphene nanoplatelets for 3D-printable composites

Auteurs: G. Gorokhov, D. Bychanok, D. Meisak, I. Shlyk, A. Liubimau, P. Angelova, C. Menseidov, E. Ivanov, R. Kotsilkova, M. Casa, P. Ciambelli, P. Kuzhir
Publié dans: IOP Conference Series: Materials Science and Engineering, Numéro 503, 2019, Page(s) 012010, ISSN 1757-899X
Éditeur: IOP publishing
DOI: 10.1088/1757-899x/503/1/012010

Exploring thermal annealing and graphene-carbon nanotube additives to enhance crystallinity, thermal, electrical and tensile properties of aged poly(lactic) acid-based filament for 3D printing

Auteurs: Rumiana Kotsilkova, Ivanka Petrova-Doycheva, Dzhihan Menseidov, Evgeni Ivanov, Alesya Paddubskaya, Polina Kuzhir
Publié dans: Composites Science and Technology, Numéro 181, 2019, Page(s) 107712, ISSN 0266-3538
Éditeur: Pergamon Press Ltd.
DOI: 10.1016/j.compscitech.2019.107712

Frequency and density dependencies of the electromagnetic parameters of carbon nanotube and graphene nanoplatelet based composites in the microwave and terahertz ranges

Auteurs: M V Shuba, D I Yuko, G Gorokhov, D Meisak, D S Bychanok, P P Kuzhir, S A Maksimenko, P Angelova, E Ivanov, R Kotsilkova
Publié dans: Materials Research Express, Numéro 6/9, 2019, Page(s) 095050, ISSN 2053-1591
Éditeur: IOP Publishing
DOI: 10.1088/2053-1591/ab2edf

Stretching and Tunability of Graphene-Based Passive Terahertz Components

Auteurs: Konstantin G. Batrakov, Nadezhda I. Volynets, Alesia G. Paddubskaya, Polina P. Kuzhir, Maria Stella Prete, Olivia Pulci, Evgeni Ivanov, Rumiana Kotsilkova, Tommi Kaplas, Yuri Svirko
Publié dans: physica status solidi (b), Numéro 28 June 2019, 2019, Page(s) 1800683, ISSN 0370-1972
Éditeur: John Wiley & Sons Ltd.
DOI: 10.1002/pssb.201800683

Nanocarbon/Poly(Lactic) Acid for 3D Printing: Effect of Fillers Content on Electromagnetic and Thermal Properties

Auteurs: Giovanni Spinelli, Patrizia Lamberti, Vincenzo Tucci, Rumiana Kotsilkova, Evgeni Ivanov, Dzhihan Menseidov, Carlo Naddeo, Vittorio Romano, Liberata Guadagno, Renata Adami, Darya Meisak, Dzmitry Bychanok, Polina Kuzhir
Publié dans: Materials, Numéro 12/15, 2019, Page(s) 2369, ISSN 1996-1944
Éditeur: MDPI Open Access Publishing
DOI: 10.3390/ma12152369

Simultaneous realization of conductive segregation network microstructure and minimal surface porous macrostructure by SLS 3D printing

Auteurs: Xinpeng Gan, Jinzhi Wang, Zhanhua Wang, Zhuo Zheng, Marino Lavorgna, Alfredo Ronca, Guoxia Fei, Hesheng Xia
Publié dans: Materials & Design, Numéro 178, 2019, Page(s) 107874, ISSN 0264-1275
Éditeur: Elsevier BV
DOI: 10.1016/j.matdes.2019.107874

Electromagnetic properties of chloroprene rubber after long-term ultraviolet ageing, oil immersion and thermal degradation

Auteurs: R Sela, D Bychanok, Y Padrez, D Adamchuk, V Ksenevich, N Naveh, P Kuzhir
Publié dans: Materials Research Express, Numéro 6/7, 2019, Page(s) 075327, ISSN 2053-1591
Éditeur: IOP Publishing
DOI: 10.1088/2053-1591/ab1574

Preparation and 3D-printing of highly conductive polylactic acid/carbon nanotube nanocomposites via local enrichment strategy

Auteurs: Shaohong Shi, Yinghong Chen, Jingjing Jing, Lu Yang
Publié dans: RSC Advances, Numéro 9/51, 2019, Page(s) 29980-29986, ISSN 2046-2069
Éditeur: Royal Society of Chemistry
DOI: 10.1039/c9ra05684j

Alignment of polymer based magnetic composites in magnetic field

Auteurs: A.V. Kukhta, P.P. Kuzhir, S.A. Maksimenko, S.A. Vorobyova, I.N. Kukhta, A.E. Pochtenny, M.I. Taoubi, S. Bistarelli, S. Bellucci
Publié dans: Progress in Organic Coatings, Numéro 137, 2019, Page(s) 105366, ISSN 0300-9440
Éditeur: Elsevier BV
DOI: 10.1016/j.porgcoat.2019.105366

Rheological behavior of graphene/epoxy nanodispersions

Auteurs: Ivanov E, Velichkova H, Kotsilkova R, Bistarelli S, Cataldo A, Micciulla F, Bellucci S.
Publié dans: Applied Rheology, Numéro 27 (2017) 24469, 2017, Page(s) 24469, ISSN 1617-8106
Éditeur: Kerschensteiner Verlag GmbH
DOI: 10.3933/ApplRheol-27-24469

Effects of Filament Extrusion, 3D Printing and Hot-Pressing on Electrical and Tensile Properties of Poly(Lactic) Acid Composites Filled with Carbon Nanotubes and Graphene

Auteurs: Giovanni Spinelli, Rumiana Kotsilkova, Evgeni Ivanov, Ivanka Petrova-Doycheva, Dzhihan Menseidov, Vladimir Georgiev, Rosa Di Maio, Clara Silvestre
Publié dans: Nanomaterials, Numéro 10/1, 2020, Page(s) 35, ISSN 2079-4991
Éditeur: MDPI
DOI: 10.3390/nano10010035

Release of carbon nanoparticles of different size and shape from nanocomposite poly(lactic) acid film into food simulants

Auteurs: Hristiana Velichkova, Stanislav Kotsilkov, Evgeni Ivanov, Rumiana Kotsilkova, Stanislav Gyoshev, Nikolay Stoimenov, Nikolay K. Vitanov
Publié dans: Food Additives & Contaminants: Part A, Numéro 34/6, 2017, Page(s) 1072-1085, ISSN 1944-0049
Éditeur: Taylor and Francis
DOI: 10.1080/19440049.2017.1310396

Graphene as a Prototypical Model for Two-Dimensional Continuous Mechanics

Auteurs: Philippe Lambin
Publié dans: Applied Sciences, Numéro 7/8, 2017, Page(s) 830, ISSN 2076-3417
Éditeur: MDI
DOI: 10.3390/app7080830

Batakliev, T.; Ivanov, E.; Angelov, V.; Spinelli, G.; Kotsilkova, R. Advanced Nanomechanical Characterization of Biopolymer Films Containing GNPs and MWCNTs in Hybrid Composite Structure. Nanomaterials 2022, 12, 709

Auteurs: Batakliev, T.; Ivanov, E.; Angelov, V.; Spinelli, G.; Kotsilkova, R.
Publié dans: Nanomaterials, Numéro 12, 2022, Page(s) 17, ISSN 2079-4991
Éditeur: MDPI
DOI: 10.3390/nano12040709

Synergistic Effect of Graphene Nanoplatelets and Multiwall Carbon Nanotubes Incorporated in PLA Matrix: Nanoindentation of Composites with Improved Mechanical Properties

Auteurs: Todor Batakliev, Vladimir Georgiev, Verislav Angelov, Evgeni Ivanov, Cristiane Kalupgian, Pablo A. R. Muñoz, Guilhermino J. M. Fechine, Ricardo J. E. Andrade, Rumiana Kotsilkova
Publié dans: Journal of Materials Engineering and Performance, Numéro Vol 30 (5), 2021, Page(s) 9, ISSN 1059-9495
Éditeur: ASM International
DOI: 10.1007/s11665-021-05679-3

On the Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets to Enhance the Functional Properties of SLS 3D-Printed Elastomeric Structures

Auteurs: Gennaro Rollo, Alfredo Ronca, Pierfrancesco Cerruti, Xin Peng Gan, Guoxia Fei, Hesheng Xia, Gleb Gorokhov, Dzmitry Bychanok, Polina Kuzhir, Marino Lavorgna, Luigi Ambrosio
Publié dans: Polymers, Numéro 12/8, 2020, Page(s) 1841, ISSN 2073-4360
Éditeur: MDPI
DOI: 10.3390/polym12081841

Robust design of compact microwave absorbers and waveguide matched loads based on DC-conductive 3D-printable filament

Auteurs: D Meisak, E Gurnevich, A Plyushch, D Bychanok, V Georgiev, R Kotsilkova, P Kuzhir
Publié dans: Journal of Physics D: Applied Physics, Numéro 53/30, 2020, Page(s) 305301, ISSN 0022-3727
Éditeur: Institute of Physics Publishing
DOI: 10.1088/1361-6463/ab86e6

THz and microwave properties of 3D-printed nanocarbon based multilayers

Auteurs: P. Kuzhir, A. Paddubskaya, N. Volynets, R. Kotsilkova, E. Ivanov, I. Biro, G. I. Mark, L. P. Biro, S. Maksimenko
Publié dans: 2017 International Conference on Electromagnetics in Advanced Applications (ICEAA), Numéro 11-15 Sept. 2017, Verona, Italy, 2017, Page(s) 822-823, ISBN 978-1-5090-4451-1
Éditeur: IEEE
DOI: 10.1109/ICEAA.2017.8065377

Electromagnetic Response Of A One-Dimensional Chain Of Interconnected Carbon Nanotubes In The Sub-Terahertz Range

Auteurs: A. V. Melnikov, M. V. Shuba
Publié dans: "International Conference on Physics, Chemistry and Application of Nanostructures ""Nanomeeting-2017"",", Numéro 30 May – 2 June 2017, 2017, Page(s) 183-186, ISBN 978-981-3224-52-0
Éditeur: WORLD SCIENTIFIC
DOI: 10.1142/9789813224537_0043

Morphological, rheological and electrical study of PLA reinforced with carbon-based fillers for 3D printing applications

Auteurs: Luigi Egiziano, Patrizia Lamberti, Giovanni Spinelli, Vincenzo Tucci, Rumiana Kotsilkova, Sonia Tabakova, Evgeni Ivanov, Clara Silvestre, Rosa Di Maio
Publié dans: AIP Conference Proceedings volume 1981, Numéro 11 July 2018; 9TH INTERNATIONAL CONFERENCE ON “TIMES OF POLYMERS AND COMPOSITES”: From Aerospace to Nanotechnology, 2018, Page(s) 020152, ISBN 978-0-7354-1697-0
Éditeur: American Institute of Physics
DOI: 10.1063/1.5046014

Evaluation of thermal and electrical conductivity of carbon-based PLA nanocomposites for 3D printing

Auteurs: Patrizia Lamberti, Giovanni Spinelli, Polina P. Kuzhir, Liberata Guadagno, Carlo Naddeo, Vittorio Romano, Rumania Kotsilkova, Polya Angelova, Vlado Georgiev
Publié dans: AIP Conference Proceedings volume 1981, Numéro Jul 11, 2018, 2018, Page(s) 020158
Éditeur: American Institute of Physics
DOI: 10.1063/1.5046020

Electrodynamics of graphene heterostructures and electromagnetic applications

Auteurs: Philippe Lambin, Bruno Majerus, Michael Lobet, Michael Sarrazin, Mirko Cormann, Tommi Kaplas, Yuri Svirko, Alesia Paddubskaya, Konstantin Batrakov, Polina Kuzhir
Publié dans: 2018 International Conference on Electromagnetics in Advanced Applications (ICEAA), Numéro Date Added to IEEE Xplore: 05 November 2018, 2018, Page(s) 47-50, ISBN 978-1-5386-6762-0
Éditeur: IEEE
DOI: 10.1109/iceaa.2018.8520341

Recherche de données OpenAIRE...

Livrables

Publications

Partager cette page

Télécharger