Obiettivo
The objective of this project is to design and test a highly efficient automated and/or assisted process for the layup operation of the manufacturing of composite stiffeners, with a competitive cost advantage comparing to the current hand lay-up process.
Different process/cell architecture will be study during the preliminary design review (as DFP, AFP, Pick and place, NCF) and consolidated by preliminary trials if necessary to select a process with the topic manager witch will devellopped in critical design review and test during trials and parts manufacturing step.
Four full scale composites parts will be manufactured and tested thanks to laboratory cell to demonstrate the maturity level of the process proposed
A mass projection study will be realized to consolidate the prospective of the process tested and approved in serial production (production capabilities, RC/NRC)
Campo scientifico
- engineering and technologymechanical engineeringmanufacturing engineering
- engineering and technologymaterials engineeringcomposites
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringrobotics
- engineering and technologyenvironmental engineeringenergy and fuels
Programma(i)
Argomento(i)
Meccanismo di finanziamento
CS2-IA - Innovation actionCoordinatore
64210 BIDART
Francia