CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.
Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .
Livrables
Synthesis report of WP4.
Geomelt technology (s’ouvre dans une nouvelle fenêtre)Report on Geomelt technology and demonstration test trials.
Memorandum outlining the output of task 3.1 (s’ouvre dans une nouvelle fenêtre)This report will show the waste streams chosen for demonstration and the technology platform on which the processing of each waste stream will be demonstrated. The justification for the use of particular platforms for selected waste streams will be outlined.
Report compiling the identification work of WAC (subtask 4.1.1, M4.1) and the requirements in terms of characterisation (subtask 4.1.2) (s’ouvre dans une nouvelle fenêtre)Report is compiling the identification work of WAC (subtask 4.1.1, M4.1) and the requirements in terms of characterisation (subtask 4.1.2). This report is a common document in which each participating country will provide some input.
Synthesis report of project (s’ouvre dans une nouvelle fenêtre)Collate the final outputs from WP2, WP3 and WP4 into an overall synthesis report for a technical readership, and a shorter summary report for a wider readership. The Synthesis report will seek to achieve the following: Ø Act as an entry point for understanding the content and nature of other project deliverables. Ø Enable mutual sharing of experience in the management of specific waste types across EU countries through recognition of common wastes and common challenges. Ø Summarise key strengths and weaknesses of different thermal treatment routes and their appropriateness and feasibility for specific waste streams. Ø Set out understanding of the characteristics and properties of thermally treated wasteforms and their viability for geological disposal, and implications for the safety case. Ø Establish preferred routes and potential mutual sharing of thermal treatment facilities to open management routes and opportunities for waste management across Europe, including identification of uncertainties, further required R&D, and next steps.
Test report covering all demonstrations including a description of the process, the waste treated and the operational process parameters such as process evolution versus time, power input and temperature of melt (s’ouvre dans une nouvelle fenêtre)Test/trial observation report covering all demonstrations including a description of the process, the waste treated and the operational process parameters such as process evolution versus time, power input and temperature of melt. A material balance across the process will be calculated and conclusions of the process operation will be drawn to include a performances assessment based on various criteria such as quality of the containment matrix, secondary waste production and organics destruction. The following demonstrations and observations from the trials will be summarised in the report (delivered in month 25); · SHIVA (CEA/AREVA) · In Can Melting (CEA/AREVA) · Thermal Gasification (VTT) · GeoMelt (NNL) · Hot Isostatic Pressing (NNL) · Active Hot Isostatic Pressing (USFD) · VICHR (VUJE) D3.2 will include a results and observations of the test trials carried out across the 6 treatment routes. Analysis will be coered in WP4 (D4.4). WP5 will include a summary and synthesis of lessons learned.
Value Assessment report (Year 3) – based on inputs from WP2, WP3 and WP4 (s’ouvre dans une nouvelle fenêtre)Report is based on inputs from WP2, WP3 and WP4. It includes review of potential benefits and disadvantages of selected waste stream / thermal treatment technology combinations in different EU countries (considers all information available at the end of the project)
Report compiling the definition and adaptation of characterisation tests (subtask 4.2.1) and the public data coming from existing or new characterisation tests from subtasks 4.2.2, 4.2.3 and 4.2.4 (s’ouvre dans une nouvelle fenêtre)This report is compiling the definition and adaptation of characterisation tests (subtask 4.2.1) and the public data coming from existing or new characterisation tests from subtasks 4.2.2, 4.2.3 and 4.2.4. This report will be based on previous milestones and each participating country will provide input.
Hot Isostatic Pressing (HIP) technology (s’ouvre dans une nouvelle fenêtre)Report on Hot Isostatic Pressing (HIP) technology and demonstration tests.
Gasification based waste treatment (s’ouvre dans une nouvelle fenêtre)Description of gasification based radwaste treatment technology and demonstration test trials carried out in the THERAMIN project.
Summary report of project (s’ouvre dans une nouvelle fenêtre)Summary report of project.
VICHR technology (s’ouvre dans une nouvelle fenêtre)Report on VICHR technology and demonstration tests.
Conference Proceedings (s’ouvre dans une nouvelle fenêtre)To coordinate a development of a project scientific conference with the project co-ordinator, WP leaders and End User group, and prepare and edit proceedings for electronic publication.
Report on the safety case implication study (s’ouvre dans une nouvelle fenêtre)Report on the safety case implication study. (task 4.3) This report is a common document in which each participating country will provide input.
SHIVA and In Can melting technologies and demonstration test trials (s’ouvre dans une nouvelle fenêtre)Report on SHIVA and In Can melting technologies and demonstrations.
Public Web site of the project
Technical Training Workshop (s’ouvre dans une nouvelle fenêtre)To organise a technical training school on thermal treatment methods and product disposability to improve knowledge and capability of young scientists and non-specialists.
Publications
Auteurs:
S Doudou, E K Swain-Phipps, A J Fuller, S M Wickham, N Daniels, E Fourcy, M Fournier, B Frasca, K Meert, A Mikusova, M Olin, R Poskas, C Scales
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012002, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012002
Auteurs:
S J Scourfield, J E Kent, S M Wickham, M Nieminen, S Clarke, B Frasca
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012001, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012001
Auteurs:
K Ferrand, S Caes, K Lemmens, K Meert
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012016, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012016
Auteurs:
N C Hyatt, C L Corkhill, M C Stennett, R J Hand, L J Gardner, C L Thorpe
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012022, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012022
Auteurs:
M Fournier, N Massoni, J F Hollebecque
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012005, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012005
Auteurs:
M Nieminen, J Laatikainen-Luntama, M Olin
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012007, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012007
Auteurs:
L J Gardner, S A Walling, N C Hyatt
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012009, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012009
Auteurs:
B Frasca, L Griffault, J Lefevre, C Martin, M A Romero
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012021, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012021
Auteurs:
S A Walling, L J Gardner, N C Hyatt
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012014, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012014
Auteurs:
S Clarke, C Scales, N Patel, J Roe, A W Banford
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012004, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012004
Auteurs:
A J Fuller, S Doudou, J E Kent, E J Harvey, S M Wickham
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012003, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012003
Auteurs:
Tapio Vehmas, Emmi Myllykylä, Matti Nieminen, Jaana Laatikainen-Luntama, Markku Leivo, Markus Olin
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012017, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012017
Auteurs:
M Fournier, F Rousset
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012015, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012015
Auteurs:
S J Scourfield, J E Kent
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 011001, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/011001
Auteurs:
L Harvey, D Galson, S Catherin, M-A Romero, M Fournier, A Fuller, S Wickham
Publié dans:
IOP Conference Series: Materials Science and Engineering, Numéro 818, 2020, Page(s) 012013, ISSN 1757-899X
Éditeur:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012013
Auteurs:
Matti Nieminen, Markus Olin, Jaana Laatikainen-Luntama, Stephen M. Wickham, Slimane Doudou, Adam J. Fuller, Jenny Kent, Maxime Fournier, Sean Clarke, Charlie Scales, Neil C. Hyatt, Sam A. Walling, Laura J. Gardner, Stephane Catherin, Benjamin Frasca
Publié dans:
EPJ Nuclear Sciences & Technologies, Numéro 6, 2020, Page(s) 25, ISSN 2491-9292
Éditeur:
EDP Sciences
DOI:
10.1051/epjn/2019040
Auteurs:
N. Massoni, M. Fournier, J.-F. Hollebecque, Y. Papin
Publié dans:
2020
Éditeur:
?
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible