CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.
Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.
Leistungen
Synthesis report of WP4.
Geomelt technology (öffnet in neuem Fenster)Report on Geomelt technology and demonstration test trials.
Memorandum outlining the output of task 3.1 (öffnet in neuem Fenster)This report will show the waste streams chosen for demonstration and the technology platform on which the processing of each waste stream will be demonstrated. The justification for the use of particular platforms for selected waste streams will be outlined.
Report compiling the identification work of WAC (subtask 4.1.1, M4.1) and the requirements in terms of characterisation (subtask 4.1.2) (öffnet in neuem Fenster)Report is compiling the identification work of WAC (subtask 4.1.1, M4.1) and the requirements in terms of characterisation (subtask 4.1.2). This report is a common document in which each participating country will provide some input.
Synthesis report of project (öffnet in neuem Fenster)Collate the final outputs from WP2, WP3 and WP4 into an overall synthesis report for a technical readership, and a shorter summary report for a wider readership. The Synthesis report will seek to achieve the following: Ø Act as an entry point for understanding the content and nature of other project deliverables. Ø Enable mutual sharing of experience in the management of specific waste types across EU countries through recognition of common wastes and common challenges. Ø Summarise key strengths and weaknesses of different thermal treatment routes and their appropriateness and feasibility for specific waste streams. Ø Set out understanding of the characteristics and properties of thermally treated wasteforms and their viability for geological disposal, and implications for the safety case. Ø Establish preferred routes and potential mutual sharing of thermal treatment facilities to open management routes and opportunities for waste management across Europe, including identification of uncertainties, further required R&D, and next steps.
Test report covering all demonstrations including a description of the process, the waste treated and the operational process parameters such as process evolution versus time, power input and temperature of melt (öffnet in neuem Fenster)Test/trial observation report covering all demonstrations including a description of the process, the waste treated and the operational process parameters such as process evolution versus time, power input and temperature of melt. A material balance across the process will be calculated and conclusions of the process operation will be drawn to include a performances assessment based on various criteria such as quality of the containment matrix, secondary waste production and organics destruction. The following demonstrations and observations from the trials will be summarised in the report (delivered in month 25); · SHIVA (CEA/AREVA) · In Can Melting (CEA/AREVA) · Thermal Gasification (VTT) · GeoMelt (NNL) · Hot Isostatic Pressing (NNL) · Active Hot Isostatic Pressing (USFD) · VICHR (VUJE) D3.2 will include a results and observations of the test trials carried out across the 6 treatment routes. Analysis will be coered in WP4 (D4.4). WP5 will include a summary and synthesis of lessons learned.
Value Assessment report (Year 3) – based on inputs from WP2, WP3 and WP4 (öffnet in neuem Fenster)Report is based on inputs from WP2, WP3 and WP4. It includes review of potential benefits and disadvantages of selected waste stream / thermal treatment technology combinations in different EU countries (considers all information available at the end of the project)
Report compiling the definition and adaptation of characterisation tests (subtask 4.2.1) and the public data coming from existing or new characterisation tests from subtasks 4.2.2, 4.2.3 and 4.2.4 (öffnet in neuem Fenster)This report is compiling the definition and adaptation of characterisation tests (subtask 4.2.1) and the public data coming from existing or new characterisation tests from subtasks 4.2.2, 4.2.3 and 4.2.4. This report will be based on previous milestones and each participating country will provide input.
Hot Isostatic Pressing (HIP) technology (öffnet in neuem Fenster)Report on Hot Isostatic Pressing (HIP) technology and demonstration tests.
Gasification based waste treatment (öffnet in neuem Fenster)Description of gasification based radwaste treatment technology and demonstration test trials carried out in the THERAMIN project.
Summary report of project (öffnet in neuem Fenster)Summary report of project.
VICHR technology (öffnet in neuem Fenster)Report on VICHR technology and demonstration tests.
Conference Proceedings (öffnet in neuem Fenster)To coordinate a development of a project scientific conference with the project co-ordinator, WP leaders and End User group, and prepare and edit proceedings for electronic publication.
Report on the safety case implication study (öffnet in neuem Fenster)Report on the safety case implication study. (task 4.3) This report is a common document in which each participating country will provide input.
SHIVA and In Can melting technologies and demonstration test trials (öffnet in neuem Fenster)Report on SHIVA and In Can melting technologies and demonstrations.
Public Web site of the project
Technical Training Workshop (öffnet in neuem Fenster)To organise a technical training school on thermal treatment methods and product disposability to improve knowledge and capability of young scientists and non-specialists.
Veröffentlichungen
Autoren:
S Doudou, E K Swain-Phipps, A J Fuller, S M Wickham, N Daniels, E Fourcy, M Fournier, B Frasca, K Meert, A Mikusova, M Olin, R Poskas, C Scales
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012002, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012002
Autoren:
S J Scourfield, J E Kent, S M Wickham, M Nieminen, S Clarke, B Frasca
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012001, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012001
Autoren:
K Ferrand, S Caes, K Lemmens, K Meert
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012016, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012016
Autoren:
N C Hyatt, C L Corkhill, M C Stennett, R J Hand, L J Gardner, C L Thorpe
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012022, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012022
Autoren:
M Fournier, N Massoni, J F Hollebecque
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012005, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012005
Autoren:
M Nieminen, J Laatikainen-Luntama, M Olin
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012007, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012007
Autoren:
L J Gardner, S A Walling, N C Hyatt
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012009, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012009
Autoren:
B Frasca, L Griffault, J Lefevre, C Martin, M A Romero
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012021, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012021
Autoren:
S A Walling, L J Gardner, N C Hyatt
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012014, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012014
Autoren:
S Clarke, C Scales, N Patel, J Roe, A W Banford
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012004, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012004
Autoren:
A J Fuller, S Doudou, J E Kent, E J Harvey, S M Wickham
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012003, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012003
Autoren:
Tapio Vehmas, Emmi Myllykylä, Matti Nieminen, Jaana Laatikainen-Luntama, Markku Leivo, Markus Olin
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012017, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012017
Autoren:
M Fournier, F Rousset
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012015, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012015
Autoren:
S J Scourfield, J E Kent
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 011001, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/011001
Autoren:
L Harvey, D Galson, S Catherin, M-A Romero, M Fournier, A Fuller, S Wickham
Veröffentlicht in:
IOP Conference Series: Materials Science and Engineering, Ausgabe 818, 2020, Seite(n) 012013, ISSN 1757-899X
Herausgeber:
IOP Publishing Ltd
DOI:
10.1088/1757-899x/818/1/012013
Autoren:
Matti Nieminen, Markus Olin, Jaana Laatikainen-Luntama, Stephen M. Wickham, Slimane Doudou, Adam J. Fuller, Jenny Kent, Maxime Fournier, Sean Clarke, Charlie Scales, Neil C. Hyatt, Sam A. Walling, Laura J. Gardner, Stephane Catherin, Benjamin Frasca
Veröffentlicht in:
EPJ Nuclear Sciences & Technologies, Ausgabe 6, 2020, Seite(n) 25, ISSN 2491-9292
Herausgeber:
EDP Sciences
DOI:
10.1051/epjn/2019040
Autoren:
N. Massoni, M. Fournier, J.-F. Hollebecque, Y. Papin
Veröffentlicht in:
2020
Herausgeber:
?
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor