Smart by Design and Intelligent by Architecture for turbine blade fan and structural components systems

Deliverables

Final Workshop Conference
SMARTFAN school
Business plan and workshop for open access 3D printing pilot line of continuous CFRP

Business plan and workshop for open access 3D printing pilot line of continuous CFRP This deliverable will be a collaborative work with BioGen3D

Project Website

Project Website. The website will be designed and maintained by WG and OSM in collaboration.

Communication Kit: Project LOGO, press release, leaflet and poster

Communication Kit: Project LOGO, press release, leaflet and poster. WG and OSM will work in collaboration for the communication kit. It will be updated in M24 and M48.

Open access database

Open access database This deliverable will be a collaborative work between IRES and OSM

Scrap material re-use guidelines

Scrap material re-use guidelines. This deliverable will be a collaborative work with BioGen3D.

Publications

Mechanical Properties, Surface Assessment, and Structural Analysis of Functionalized CFRPs after Accelerated Weathering

Author(s): Dionisis Semitekolos, Georgios Konstantopoulos, Aikaterini-Flora Trompeta, Craig Jones, Amit Rana, Christopher Graham, Mauro Giorcelli, Alberto Tagliaferro, Elias P Koumoulos, Costas A Charitidis
Published in: Polymers, Issue 13 (23), 2021, Page(s) 4092, ISSN 2073-4360
Publisher: MDPI
DOI: 10.3390/polym13234092

Unraveling the mechanisms of carbon nanotube growth by chemical vapor deposition

Author(s): Georgios P. Gakis, StefaniaTermine, Aikaterini-Flora A.Trompeta, Ioannis G.Aviziotis, Costas A. Charitidis
Published in: Chemical Engineering Journal, 2022, Page(s) 136807, ISSN 1385-8947
Publisher: Elsevier BV
DOI: 10.1016/j.cej.2022.136807

Multi-parametric analysis of the CVD of CNTs: Effect of reaction temperature, pressure and acetylene flow rate

Author(s): G.P. Gakis, E.N. Skountzos, I.G. Aviziotis, C.A. Charitidis
Published in: Chemical Engineering Science, Issue 267, 2023, Page(s) 118374, ISSN 1873-4405
Publisher: Elsevier
DOI: 10.1016/j.ces.2022.118374

Applying Machine Learning to Nanoindentation Data of (Nano-) Enhanced Composites

Author(s): Elias Koumoulos, George Konstantopoulos, Costas Charitidis
Published in: Fibers, Issue 8/1, 2020, Page(s) 3, ISSN 2079-6439
Publisher: MDPI
DOI: 10.3390/fib8010003

Lessons Learnt from Engineering Science Projects Participating in the Horizon 2020 Open Research Data Pilot

Author(s): Timothy Austin, Kyriaki Bei, Theodoros Efthymiadis, Elias P. Koumoulos
Published in: Data, Issue 6(9), 2021, Page(s) 96, ISSN 2306-5729
Publisher: MDPI
DOI: 10.3390/data6090096

Classification of mechanism of reinforcement in the fiber-matrix interface: Application of Machine Learning on nanoindentation data

Author(s): Georgios Konstantopoulos, Elias P Koumoulos, Costas A Charitidis
Published in: Materials & Design, Issue 192(1), 2020, Page(s) 108705, ISSN 0264-1275
Publisher: Elsevier BV
DOI: 10.1016/j.matdes.2020.108705

Investigation on the interfacial properties of CNTs sized carbon fibres in epoxy resin using push-out method via nano-indentation technique

Author(s): Zhenxue Zhang, Xiaoying Li, Hanshan Dong, Simon Jestin, Stefania Termine, Aikaterini-Flora Trompeta, Andreia Araújo, Raquel M. Santos and Costas Charitidis
Published in: MATEC Web Conf., Issue 349 (15), 2021, Page(s) 01007, ISSN 2261-236X
Publisher: EPD
DOI: 10.1051/matecconf/202134901007

Double cantilever beam test and micro-computed tomography as evaluation tools for self-healing of CFRPs loaded with DCPD microcapsules

Author(s): Artemis Kontiza, Dionisis Semitekolos, Tatjana Kosanovic Milickovic, Panagiotis Pappas, Nikolaos Koutroumanis, Costas Galiotis, Costas A Charitidis
Published in: Composite Structures, Issue 279 (1), 2022, Page(s) 114780, ISSN 0263-8223
Publisher: Elsevier BV
DOI: 10.1016/j.compstruct.2021.114780

Research and Development in Carbon Fibers and Advanced High-Performance Composites Supply Chain in Europe: A Roadmap for Challenges and the Industrial Uptake

Author(s): Elias P Koumoulos, Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm, Guan Gong, Agustin Chiminelli, Ignaas Verpoest, Paul Kiekens, Costas A Charitidis
Published in: Journal of Composites Science, Issue 3 (3), 2019, Page(s) 86, ISSN 2504-477X
Publisher: MDPI
DOI: 10.3390/jcs3030086

Shape memory polymer composite unit with embedded heater

Author(s): Fabrizio Quadrini, Leandro Iorio, Denise Bellisario and Loredana Santo
Published in: Smart Materials and Structures, Issue 30, 2021, Page(s) 075009, ISSN 1361-665X
Publisher: IOP Science
DOI: 10.1088/1361-665x/ac00cb

Effect of Impact Modifiers on Strength and Fracture Toughness of CFRPs

Author(s): Dionisis Semitekolos, Ioannis G Asimakopoulos, Dimitrios A Dragatogiannis, Costas A Charitidis
Published in: MATEC Web of Conferences, Issue 349 (15), 2021, Page(s) 01006, ISSN 2261-236X
Publisher: EDP Sciences
DOI: 10.1051/matecconf/202134901006

Deposition of graphene and related nanomaterials by dynamic spray-gun method: a new route to implement nanomaterials in real applications

Author(s): Paolo Bondavalli, Didier Pribat, Pierre Legagneux, Marie-Blandine Martin, Louiza Hamidouche, Lilia Qassym, Gilles Feugnet, Aikaterini-Flora Trompeta, Constantinos A Charitidis
Published in: Journal of Physics: Materials, Issue 2/3, 2019, Page(s) 032002, ISSN 2515-7639
Publisher: IOP Publishing
DOI: 10.1088/2515-7639/ab1795

Novel CNTs grafting on carbon fibres through CVD: investigation of epoxy matrix/fibre interface via nanoindentation

Author(s): Stefania Termine, Aikaterini-Flora A. Trompeta, Dimitrios A. Dragatogiannis, Costas A. Charitidis
Published in: MATEC Web of Conferences, Issue 304, 2019, Page(s) 01014, ISSN 2261-236X
Publisher: EDP Sciences
DOI: 10.1051/matecconf/201930401014

Challenges and opportunities on nano-enabled multifunctional composites for aerostructures

Author(s): Andreia Araujo, Diogo Vale, Panagiotis-Nektarios Pappas, Nikos Koutroumanis, Raquel M. Santos
Published in: MATEC Web of Conferences, Issue 304, 2019, Page(s) 01007, ISSN 2261-236X
Publisher: EDP Sciences
DOI: 10.1051/matecconf/201930401007

Active-screen plasma surface multi-functionalisation of biopolymers and carbon-based materials – An overview

Author(s): Behnam Dashtbozorg, Xiao Tao, Hanshan Dong
Published in: Surface and Coatings Technology, Issue In press, 2022, Page(s) 128188, ISSN 0257-8972
Publisher: Elsevier BV
DOI: 10.1016/j.surfcoat.2022.128188

3D Printing Processability of a Thermally Conductive Compound Based on Carbon Nanofiller-Modified Thermoplastic Polyamide 12

Author(s): Zhenxue Zhang, Eleni Gkartzou, Simon Jestin, Dionisis Semitekolos, Panagiotis-Nektarios Pappas, Xiaoying Li, Anna Karatza, Panagiotis Zouboulis, Aikaterini-Flora Trompeta, Nikolaos Koutroumanis, Costas Galiotis, Costas Charitidis, Hanshan Dong
Published in: Polymers, Issue 14 (3), 2022, Page(s) 470, ISSN 2073-4360
Publisher: MDPI
DOI: 10.3390/polym14030470

Carbon Fiber Reinforced Composites: Study of Modification Effect on Weathering-Induced Ageing via Nanoindentation and Deep Learning

Author(s): Georgios Konstantopoulos,Dionisis Semitekolos,Elias P. Koumoulos,Costas Charitidis
Published in: Nanomaterials, Issue 11(10), 2021, Page(s) 2631, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano11102631

Investigation of Carbon Fibres Reclamation by Pyrolysis Process for Their Reuse Potential

Author(s): Stefania Termine,Valentina Naxaki, Dionisis Semitekolos, Aikaterini-Flora Trompeta, Massimo Rovere, Alberto Tagliaferro, Costas Charitidis
Published in: Polymers, Issue 15(3), 2023, Page(s) 768, ISSN 2073-4360
Publisher: MDPI
DOI: 10.3390/polym15030768

Study on crack propagation and self-healing of CFRPs enhanced with microcapsules

Author(s): Artemis Kontiza
Published in: 2021
Publisher: NTUA
DOI: 10.26240/heal.ntua.21980

Optimised growth and functionalisation of 1-D carbon nanostructures for the reinforcement of advanced nanocomposite materials

Author(s): Aikaterini-Flora Trompeta
Published in: 2021
Publisher: NTUA
DOI: 10.26240/heal.ntua.21897

Polymer composites reinforced with carbon based (nano-)materials: Study of self-sensing properties

Author(s): Stefania Termine
Published in: 2019
Publisher: NTUA
DOI: 10.26240/heal.ntua.17619

Modelling thermo-physical properties carbon reinforced polymer Composites.

Author(s): Atta Muhammad
Published in: 2019
Publisher: Politecnico di Torino

Thermo-physical properties of graphene reinforced thermoplastics: A Coarse-Grained Modelling Approach

Author(s): R. Srivastava, A. Muhammad, M. Fasano, P.-N. Pappas, P. Asinari
Published in: Molsim, 2021
Publisher: Department of Chemical Engineering IITK

Life Cycle Assessment (LCA) as a support decision-making tool in nanocomposite material additive manufacturing sector

Author(s): Anastasia Gkika, Foteini Petrakli, Natalia Sieti, Anestis Vlysidis, Elias Koumoulos
Published in: 8th International Conference on Sustainable Solid Waste Management, 2021
Publisher: BIOPRO BW

GROWTH OF EXOTIC CARBON NANOSTRUCTURES ON CHALLENGING SUBSTRATES BY CHEMICAL VAPOR DEPOSITION

Author(s): S. Termine, A.F. Trompeta, C.A. Charitidis
Published in: 2019
Publisher: 12th Panhellenic Conference of Chemical Engineering

Shape memory polymer composites with carbon nanotubes

Author(s): Bellisario D, Iorio L, Quadrini F, Santo L, Santarsiero A
Published in: 2018
Publisher: NanoInnovation 2018

Composite materials circular economy: the case of “green” fibres and nanoenhanced fibrous polymer composites

Author(s): A.F. Trompeta, T. Kosanovic-Milickovic, E.P. Koumoulos, C.A. Charitidis
Published in: 2019
Publisher: EuroNanoForum 2019

3 Modeling carbon-based smart materials

Author(s): Rajat Srivastava, Matteo Fasano, Shahin Mohammad Nejad, Hernán Chávez Thielemann, Eliodoro Chiavazzo, and Pietro Asinari
Published in: Carbon-Based Smart Materials, 2020, Page(s) 33-80, ISBN 9783110479133
Publisher: De Gruyter
DOI: 10.1515/9783110479133-003

Searching for OpenAIRE data...

Deliverables

Publications

Share this page

Download