Smart by Design and Intelligent by Architecture for turbine blade fan and structural components systems

Resultado final

Final Workshop Conference
SMARTFAN school
Business plan and workshop for open access 3D printing pilot line of continuous CFRP

Business plan and workshop for open access 3D printing pilot line of continuous CFRP This deliverable will be a collaborative work with BioGen3D

Project Website

Project Website. The website will be designed and maintained by WG and OSM in collaboration.

Communication Kit: Project LOGO, press release, leaflet and poster

Communication Kit: Project LOGO, press release, leaflet and poster. WG and OSM will work in collaboration for the communication kit. It will be updated in M24 and M48.

Open access database

Open access database This deliverable will be a collaborative work between IRES and OSM

Scrap material re-use guidelines

Scrap material re-use guidelines. This deliverable will be a collaborative work with BioGen3D.

Publicaciones

Mechanical Properties, Surface Assessment, and Structural Analysis of Functionalized CFRPs after Accelerated Weathering

Autores: Dionisis Semitekolos, Georgios Konstantopoulos, Aikaterini-Flora Trompeta, Craig Jones, Amit Rana, Christopher Graham, Mauro Giorcelli, Alberto Tagliaferro, Elias P Koumoulos, Costas A Charitidis
Publicado en: Polymers, Edición 13 (23), 2021, Página(s) 4092, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym13234092

Unraveling the mechanisms of carbon nanotube growth by chemical vapor deposition

Autores: Georgios P. Gakis, StefaniaTermine, Aikaterini-Flora A.Trompeta, Ioannis G.Aviziotis, Costas A. Charitidis
Publicado en: Chemical Engineering Journal, 2022, Página(s) 136807, ISSN 1385-8947
Editor: Elsevier BV
DOI: 10.1016/j.cej.2022.136807

Multi-parametric analysis of the CVD of CNTs: Effect of reaction temperature, pressure and acetylene flow rate

Autores: G.P. Gakis, E.N. Skountzos, I.G. Aviziotis, C.A. Charitidis
Publicado en: Chemical Engineering Science, Edición 267, 2023, Página(s) 118374, ISSN 1873-4405
Editor: Elsevier
DOI: 10.1016/j.ces.2022.118374

Applying Machine Learning to Nanoindentation Data of (Nano-) Enhanced Composites

Autores: Elias Koumoulos, George Konstantopoulos, Costas Charitidis
Publicado en: Fibers, Edición 8/1, 2020, Página(s) 3, ISSN 2079-6439
Editor: MDPI
DOI: 10.3390/fib8010003

Lessons Learnt from Engineering Science Projects Participating in the Horizon 2020 Open Research Data Pilot

Autores: Timothy Austin, Kyriaki Bei, Theodoros Efthymiadis, Elias P. Koumoulos
Publicado en: Data, Edición 6(9), 2021, Página(s) 96, ISSN 2306-5729
Editor: MDPI
DOI: 10.3390/data6090096

Classification of mechanism of reinforcement in the fiber-matrix interface: Application of Machine Learning on nanoindentation data

Autores: Georgios Konstantopoulos, Elias P Koumoulos, Costas A Charitidis
Publicado en: Materials & Design, Edición 192(1), 2020, Página(s) 108705, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2020.108705

Investigation on the interfacial properties of CNTs sized carbon fibres in epoxy resin using push-out method via nano-indentation technique

Autores: Zhenxue Zhang, Xiaoying Li, Hanshan Dong, Simon Jestin, Stefania Termine, Aikaterini-Flora Trompeta, Andreia Araújo, Raquel M. Santos and Costas Charitidis
Publicado en: MATEC Web Conf., Edición 349 (15), 2021, Página(s) 01007, ISSN 2261-236X
Editor: EPD
DOI: 10.1051/matecconf/202134901007

Double cantilever beam test and micro-computed tomography as evaluation tools for self-healing of CFRPs loaded with DCPD microcapsules

Autores: Artemis Kontiza, Dionisis Semitekolos, Tatjana Kosanovic Milickovic, Panagiotis Pappas, Nikolaos Koutroumanis, Costas Galiotis, Costas A Charitidis
Publicado en: Composite Structures, Edición 279 (1), 2022, Página(s) 114780, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2021.114780

Research and Development in Carbon Fibers and Advanced High-Performance Composites Supply Chain in Europe: A Roadmap for Challenges and the Industrial Uptake

Autores: Elias P Koumoulos, Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm, Guan Gong, Agustin Chiminelli, Ignaas Verpoest, Paul Kiekens, Costas A Charitidis
Publicado en: Journal of Composites Science, Edición 3 (3), 2019, Página(s) 86, ISSN 2504-477X
Editor: MDPI
DOI: 10.3390/jcs3030086

Shape memory polymer composite unit with embedded heater

Autores: Fabrizio Quadrini, Leandro Iorio, Denise Bellisario and Loredana Santo
Publicado en: Smart Materials and Structures, Edición 30, 2021, Página(s) 075009, ISSN 1361-665X
Editor: IOP Science
DOI: 10.1088/1361-665x/ac00cb

Effect of Impact Modifiers on Strength and Fracture Toughness of CFRPs

Autores: Dionisis Semitekolos, Ioannis G Asimakopoulos, Dimitrios A Dragatogiannis, Costas A Charitidis
Publicado en: MATEC Web of Conferences, Edición 349 (15), 2021, Página(s) 01006, ISSN 2261-236X
Editor: EDP Sciences
DOI: 10.1051/matecconf/202134901006

Deposition of graphene and related nanomaterials by dynamic spray-gun method: a new route to implement nanomaterials in real applications

Autores: Paolo Bondavalli, Didier Pribat, Pierre Legagneux, Marie-Blandine Martin, Louiza Hamidouche, Lilia Qassym, Gilles Feugnet, Aikaterini-Flora Trompeta, Constantinos A Charitidis
Publicado en: Journal of Physics: Materials, Edición 2/3, 2019, Página(s) 032002, ISSN 2515-7639
Editor: IOP Publishing
DOI: 10.1088/2515-7639/ab1795

Novel CNTs grafting on carbon fibres through CVD: investigation of epoxy matrix/fibre interface via nanoindentation

Autores: Stefania Termine, Aikaterini-Flora A. Trompeta, Dimitrios A. Dragatogiannis, Costas A. Charitidis
Publicado en: MATEC Web of Conferences, Edición 304, 2019, Página(s) 01014, ISSN 2261-236X
Editor: EDP Sciences
DOI: 10.1051/matecconf/201930401014

Challenges and opportunities on nano-enabled multifunctional composites for aerostructures

Autores: Andreia Araujo, Diogo Vale, Panagiotis-Nektarios Pappas, Nikos Koutroumanis, Raquel M. Santos
Publicado en: MATEC Web of Conferences, Edición 304, 2019, Página(s) 01007, ISSN 2261-236X
Editor: EDP Sciences
DOI: 10.1051/matecconf/201930401007

Active-screen plasma surface multi-functionalisation of biopolymers and carbon-based materials – An overview

Autores: Behnam Dashtbozorg, Xiao Tao, Hanshan Dong
Publicado en: Surface and Coatings Technology, Edición In press, 2022, Página(s) 128188, ISSN 0257-8972
Editor: Elsevier BV
DOI: 10.1016/j.surfcoat.2022.128188

3D Printing Processability of a Thermally Conductive Compound Based on Carbon Nanofiller-Modified Thermoplastic Polyamide 12

Autores: Zhenxue Zhang, Eleni Gkartzou, Simon Jestin, Dionisis Semitekolos, Panagiotis-Nektarios Pappas, Xiaoying Li, Anna Karatza, Panagiotis Zouboulis, Aikaterini-Flora Trompeta, Nikolaos Koutroumanis, Costas Galiotis, Costas Charitidis, Hanshan Dong
Publicado en: Polymers, Edición 14 (3), 2022, Página(s) 470, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym14030470

Carbon Fiber Reinforced Composites: Study of Modification Effect on Weathering-Induced Ageing via Nanoindentation and Deep Learning

Autores: Georgios Konstantopoulos,Dionisis Semitekolos,Elias P. Koumoulos,Costas Charitidis
Publicado en: Nanomaterials, Edición 11(10), 2021, Página(s) 2631, ISSN 2079-4991
Editor: MDPI
DOI: 10.3390/nano11102631

Investigation of Carbon Fibres Reclamation by Pyrolysis Process for Their Reuse Potential

Autores: Stefania Termine,Valentina Naxaki, Dionisis Semitekolos, Aikaterini-Flora Trompeta, Massimo Rovere, Alberto Tagliaferro, Costas Charitidis
Publicado en: Polymers, Edición 15(3), 2023, Página(s) 768, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/polym15030768

Study on crack propagation and self-healing of CFRPs enhanced with microcapsules

Autores: Artemis Kontiza
Publicado en: 2021
Editor: NTUA
DOI: 10.26240/heal.ntua.21980

Optimised growth and functionalisation of 1-D carbon nanostructures for the reinforcement of advanced nanocomposite materials

Autores: Aikaterini-Flora Trompeta
Publicado en: 2021
Editor: NTUA
DOI: 10.26240/heal.ntua.21897

Polymer composites reinforced with carbon based (nano-)materials: Study of self-sensing properties

Autores: Stefania Termine
Publicado en: 2019
Editor: NTUA
DOI: 10.26240/heal.ntua.17619

Modelling thermo-physical properties carbon reinforced polymer Composites.

Autores: Atta Muhammad
Publicado en: 2019
Editor: Politecnico di Torino

Thermo-physical properties of graphene reinforced thermoplastics: A Coarse-Grained Modelling Approach

Autores: R. Srivastava, A. Muhammad, M. Fasano, P.-N. Pappas, P. Asinari
Publicado en: Molsim, 2021
Editor: Department of Chemical Engineering IITK

Life Cycle Assessment (LCA) as a support decision-making tool in nanocomposite material additive manufacturing sector

Autores: Anastasia Gkika, Foteini Petrakli, Natalia Sieti, Anestis Vlysidis, Elias Koumoulos
Publicado en: 8th International Conference on Sustainable Solid Waste Management, 2021
Editor: BIOPRO BW

GROWTH OF EXOTIC CARBON NANOSTRUCTURES ON CHALLENGING SUBSTRATES BY CHEMICAL VAPOR DEPOSITION

Autores: S. Termine, A.F. Trompeta, C.A. Charitidis
Publicado en: 2019
Editor: 12th Panhellenic Conference of Chemical Engineering

Shape memory polymer composites with carbon nanotubes

Autores: Bellisario D, Iorio L, Quadrini F, Santo L, Santarsiero A
Publicado en: 2018
Editor: NanoInnovation 2018

Composite materials circular economy: the case of “green” fibres and nanoenhanced fibrous polymer composites

Autores: A.F. Trompeta, T. Kosanovic-Milickovic, E.P. Koumoulos, C.A. Charitidis
Publicado en: 2019
Editor: EuroNanoForum 2019

3 Modeling carbon-based smart materials

Autores: Rajat Srivastava, Matteo Fasano, Shahin Mohammad Nejad, Hernán Chávez Thielemann, Eliodoro Chiavazzo, and Pietro Asinari
Publicado en: Carbon-Based Smart Materials, 2020, Página(s) 33-80, ISBN 9783110479133
Editor: De Gruyter
DOI: 10.1515/9783110479133-003

Buscando datos de OpenAIRE...

Resultado final

Publicaciones

Compartir esta página

Descargar