Smart by Design and Intelligent by Architecture for turbine blade fan and structural components systems

Risultati finali

Final Workshop Conference
SMARTFAN school
Business plan and workshop for open access 3D printing pilot line of continuous CFRP

Business plan and workshop for open access 3D printing pilot line of continuous CFRP This deliverable will be a collaborative work with BioGen3D

Project Website

Project Website. The website will be designed and maintained by WG and OSM in collaboration.

Communication Kit: Project LOGO, press release, leaflet and poster

Communication Kit: Project LOGO, press release, leaflet and poster. WG and OSM will work in collaboration for the communication kit. It will be updated in M24 and M48.

Open access database

Open access database This deliverable will be a collaborative work between IRES and OSM

Scrap material re-use guidelines

Scrap material re-use guidelines. This deliverable will be a collaborative work with BioGen3D.

Pubblicazioni

Mechanical Properties, Surface Assessment, and Structural Analysis of Functionalized CFRPs after Accelerated Weathering

Autori: Dionisis Semitekolos, Georgios Konstantopoulos, Aikaterini-Flora Trompeta, Craig Jones, Amit Rana, Christopher Graham, Mauro Giorcelli, Alberto Tagliaferro, Elias P Koumoulos, Costas A Charitidis
Pubblicato in: Polymers, Numero 13 (23), 2021, Pagina/e 4092, ISSN 2073-4360
Editore: MDPI
DOI: 10.3390/polym13234092

Unraveling the mechanisms of carbon nanotube growth by chemical vapor deposition

Autori: Georgios P. Gakis, StefaniaTermine, Aikaterini-Flora A.Trompeta, Ioannis G.Aviziotis, Costas A. Charitidis
Pubblicato in: Chemical Engineering Journal, 2022, Pagina/e 136807, ISSN 1385-8947
Editore: Elsevier BV
DOI: 10.1016/j.cej.2022.136807

Multi-parametric analysis of the CVD of CNTs: Effect of reaction temperature, pressure and acetylene flow rate

Autori: G.P. Gakis, E.N. Skountzos, I.G. Aviziotis, C.A. Charitidis
Pubblicato in: Chemical Engineering Science, Numero 267, 2023, Pagina/e 118374, ISSN 1873-4405
Editore: Elsevier
DOI: 10.1016/j.ces.2022.118374

Applying Machine Learning to Nanoindentation Data of (Nano-) Enhanced Composites

Autori: Elias Koumoulos, George Konstantopoulos, Costas Charitidis
Pubblicato in: Fibers, Numero 8/1, 2020, Pagina/e 3, ISSN 2079-6439
Editore: MDPI
DOI: 10.3390/fib8010003

Lessons Learnt from Engineering Science Projects Participating in the Horizon 2020 Open Research Data Pilot

Autori: Timothy Austin, Kyriaki Bei, Theodoros Efthymiadis, Elias P. Koumoulos
Pubblicato in: Data, Numero 6(9), 2021, Pagina/e 96, ISSN 2306-5729
Editore: MDPI
DOI: 10.3390/data6090096

Classification of mechanism of reinforcement in the fiber-matrix interface: Application of Machine Learning on nanoindentation data

Autori: Georgios Konstantopoulos, Elias P Koumoulos, Costas A Charitidis
Pubblicato in: Materials & Design, Numero 192(1), 2020, Pagina/e 108705, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.matdes.2020.108705

Investigation on the interfacial properties of CNTs sized carbon fibres in epoxy resin using push-out method via nano-indentation technique

Autori: Zhenxue Zhang, Xiaoying Li, Hanshan Dong, Simon Jestin, Stefania Termine, Aikaterini-Flora Trompeta, Andreia Araújo, Raquel M. Santos and Costas Charitidis
Pubblicato in: MATEC Web Conf., Numero 349 (15), 2021, Pagina/e 01007, ISSN 2261-236X
Editore: EPD
DOI: 10.1051/matecconf/202134901007

Double cantilever beam test and micro-computed tomography as evaluation tools for self-healing of CFRPs loaded with DCPD microcapsules

Autori: Artemis Kontiza, Dionisis Semitekolos, Tatjana Kosanovic Milickovic, Panagiotis Pappas, Nikolaos Koutroumanis, Costas Galiotis, Costas A Charitidis
Pubblicato in: Composite Structures, Numero 279 (1), 2022, Pagina/e 114780, ISSN 0263-8223
Editore: Elsevier BV
DOI: 10.1016/j.compstruct.2021.114780

Research and Development in Carbon Fibers and Advanced High-Performance Composites Supply Chain in Europe: A Roadmap for Challenges and the Industrial Uptake

Autori: Elias P Koumoulos, Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm, Guan Gong, Agustin Chiminelli, Ignaas Verpoest, Paul Kiekens, Costas A Charitidis
Pubblicato in: Journal of Composites Science, Numero 3 (3), 2019, Pagina/e 86, ISSN 2504-477X
Editore: MDPI
DOI: 10.3390/jcs3030086

Shape memory polymer composite unit with embedded heater

Autori: Fabrizio Quadrini, Leandro Iorio, Denise Bellisario and Loredana Santo
Pubblicato in: Smart Materials and Structures, Numero 30, 2021, Pagina/e 075009, ISSN 1361-665X
Editore: IOP Science
DOI: 10.1088/1361-665x/ac00cb

Effect of Impact Modifiers on Strength and Fracture Toughness of CFRPs

Autori: Dionisis Semitekolos, Ioannis G Asimakopoulos, Dimitrios A Dragatogiannis, Costas A Charitidis
Pubblicato in: MATEC Web of Conferences, Numero 349 (15), 2021, Pagina/e 01006, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/202134901006

Deposition of graphene and related nanomaterials by dynamic spray-gun method: a new route to implement nanomaterials in real applications

Autori: Paolo Bondavalli, Didier Pribat, Pierre Legagneux, Marie-Blandine Martin, Louiza Hamidouche, Lilia Qassym, Gilles Feugnet, Aikaterini-Flora Trompeta, Constantinos A Charitidis
Pubblicato in: Journal of Physics: Materials, Numero 2/3, 2019, Pagina/e 032002, ISSN 2515-7639
Editore: IOP Publishing
DOI: 10.1088/2515-7639/ab1795

Novel CNTs grafting on carbon fibres through CVD: investigation of epoxy matrix/fibre interface via nanoindentation

Autori: Stefania Termine, Aikaterini-Flora A. Trompeta, Dimitrios A. Dragatogiannis, Costas A. Charitidis
Pubblicato in: MATEC Web of Conferences, Numero 304, 2019, Pagina/e 01014, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201930401014

Challenges and opportunities on nano-enabled multifunctional composites for aerostructures

Autori: Andreia Araujo, Diogo Vale, Panagiotis-Nektarios Pappas, Nikos Koutroumanis, Raquel M. Santos
Pubblicato in: MATEC Web of Conferences, Numero 304, 2019, Pagina/e 01007, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201930401007

Active-screen plasma surface multi-functionalisation of biopolymers and carbon-based materials – An overview

Autori: Behnam Dashtbozorg, Xiao Tao, Hanshan Dong
Pubblicato in: Surface and Coatings Technology, Numero In press, 2022, Pagina/e 128188, ISSN 0257-8972
Editore: Elsevier BV
DOI: 10.1016/j.surfcoat.2022.128188

3D Printing Processability of a Thermally Conductive Compound Based on Carbon Nanofiller-Modified Thermoplastic Polyamide 12

Autori: Zhenxue Zhang, Eleni Gkartzou, Simon Jestin, Dionisis Semitekolos, Panagiotis-Nektarios Pappas, Xiaoying Li, Anna Karatza, Panagiotis Zouboulis, Aikaterini-Flora Trompeta, Nikolaos Koutroumanis, Costas Galiotis, Costas Charitidis, Hanshan Dong
Pubblicato in: Polymers, Numero 14 (3), 2022, Pagina/e 470, ISSN 2073-4360
Editore: MDPI
DOI: 10.3390/polym14030470

Carbon Fiber Reinforced Composites: Study of Modification Effect on Weathering-Induced Ageing via Nanoindentation and Deep Learning

Autori: Georgios Konstantopoulos,Dionisis Semitekolos,Elias P. Koumoulos,Costas Charitidis
Pubblicato in: Nanomaterials, Numero 11(10), 2021, Pagina/e 2631, ISSN 2079-4991
Editore: MDPI
DOI: 10.3390/nano11102631

Investigation of Carbon Fibres Reclamation by Pyrolysis Process for Their Reuse Potential

Autori: Stefania Termine,Valentina Naxaki, Dionisis Semitekolos, Aikaterini-Flora Trompeta, Massimo Rovere, Alberto Tagliaferro, Costas Charitidis
Pubblicato in: Polymers, Numero 15(3), 2023, Pagina/e 768, ISSN 2073-4360
Editore: MDPI
DOI: 10.3390/polym15030768

Study on crack propagation and self-healing of CFRPs enhanced with microcapsules

Autori: Artemis Kontiza
Pubblicato in: 2021
Editore: NTUA
DOI: 10.26240/heal.ntua.21980

Optimised growth and functionalisation of 1-D carbon nanostructures for the reinforcement of advanced nanocomposite materials

Autori: Aikaterini-Flora Trompeta
Pubblicato in: 2021
Editore: NTUA
DOI: 10.26240/heal.ntua.21897

Polymer composites reinforced with carbon based (nano-)materials: Study of self-sensing properties

Autori: Stefania Termine
Pubblicato in: 2019
Editore: NTUA
DOI: 10.26240/heal.ntua.17619

Modelling thermo-physical properties carbon reinforced polymer Composites.

Autori: Atta Muhammad
Pubblicato in: 2019
Editore: Politecnico di Torino

Thermo-physical properties of graphene reinforced thermoplastics: A Coarse-Grained Modelling Approach

Autori: R. Srivastava, A. Muhammad, M. Fasano, P.-N. Pappas, P. Asinari
Pubblicato in: Molsim, 2021
Editore: Department of Chemical Engineering IITK

Life Cycle Assessment (LCA) as a support decision-making tool in nanocomposite material additive manufacturing sector

Autori: Anastasia Gkika, Foteini Petrakli, Natalia Sieti, Anestis Vlysidis, Elias Koumoulos
Pubblicato in: 8th International Conference on Sustainable Solid Waste Management, 2021
Editore: BIOPRO BW

GROWTH OF EXOTIC CARBON NANOSTRUCTURES ON CHALLENGING SUBSTRATES BY CHEMICAL VAPOR DEPOSITION

Autori: S. Termine, A.F. Trompeta, C.A. Charitidis
Pubblicato in: 2019
Editore: 12th Panhellenic Conference of Chemical Engineering

Shape memory polymer composites with carbon nanotubes

Autori: Bellisario D, Iorio L, Quadrini F, Santo L, Santarsiero A
Pubblicato in: 2018
Editore: NanoInnovation 2018

Composite materials circular economy: the case of “green” fibres and nanoenhanced fibrous polymer composites

Autori: A.F. Trompeta, T. Kosanovic-Milickovic, E.P. Koumoulos, C.A. Charitidis
Pubblicato in: 2019
Editore: EuroNanoForum 2019

3 Modeling carbon-based smart materials

Autori: Rajat Srivastava, Matteo Fasano, Shahin Mohammad Nejad, Hernán Chávez Thielemann, Eliodoro Chiavazzo, and Pietro Asinari
Pubblicato in: Carbon-Based Smart Materials, 2020, Pagina/e 33-80, ISBN 9783110479133
Editore: De Gruyter
DOI: 10.1515/9783110479133-003

È in corso la ricerca di dati su OpenAIRE...

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica