CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.
Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .
Livrables
Experimental validation of the flow control technology using the HighSpeed Research Compressor rig at TUM and quantification of the performance benefit and it comparison against numerical predictionReportout will include the speedline of the compressor traverse data pressure temperature velocities and flow angles at intrastage planes Deliverable relates to T11
Analysis of operation performance of the condition monitoring system (s’ouvre dans une nouvelle fenêtre)Evaluation of data generated by condition monitoring system during routine operation (in test rig) as well as specific test cases if applicable. The report contains results of real engine data during routine operation. Data will be evaluated and the condition based monitoring scheme verified. This deliverable belongs to Task 4.1
Model development and validation (s’ouvre dans une nouvelle fenêtre)A report showing the combustor characteristics of 3D CFD model with performance and predictions comparable to available combustor data. The aim is to match model and data as close as possible to baseline. This relates to Task 2.2.
Design and verification of model (s’ouvre dans une nouvelle fenêtre)A report showing performance characteristics of 3D compressor model compared with predictions of a reference compressor. The aim is to obtain a compressor model that is indicative of the reference compressor performance at baseline. This relates to Task 1.3.
Layman’s report on performance and flexibility improvements and their economic impact (s’ouvre dans une nouvelle fenêtre)This deliverable refers to Tasks 5.1, 5.2 and 5.3. The aim of the deliverable is to publish a public report, which describes the key achievements of TURBO-REFLEX consortium in the improvements of performance and flexibility in the power plants under consideration and their expected economic impact in the electricity market.
Rotor life evaluation system (s’ouvre dans une nouvelle fenêtre)Thermal stress and life expenditure module ready for implementation in the Turbine Control System. A modified thermal stress and life expenditure module will be ready to be implemented in the TCS to assess the remaining life of the turbine according to actual operational steam parameters and flow conditions in turbine inlet. The implementation in the TCS itself is outside the scope of the project. Deliverable relates to ST4.2.2
Plant baseline model (s’ouvre dans une nouvelle fenêtre)Report that describes baseline models and operating profile for OCGT, CCGT, steam and aero GT power plant modelling. - Determination of a generic heavy duty GT and aero GT model to be used as baseline for the investigations after coordination with all partners - Determination of OCGT, CCGT and steam cycle model to be used as baseline for the investigations after coordination with all partners Deliverable relates to Task 5.1 and Task 5.2
Dissemination and exploitation plan (s’ouvre dans une nouvelle fenêtre)Report describing the measures to be taken to increase public awareness for the project and widely distribute project results to different target audiences. Further, the plan will provide the strategic exploitation plan carried out jointly from Consortium partners and individually by the industry partners. Finally, the measures and mechanisms that have will be established in order to protect foreground and determine how they will be used will be part of the plan. The document will be updated continuously and made available to the full consortium.
Implemented and validated condition monitoring system at rig engine (s’ouvre dans une nouvelle fenêtre)Functioning and tested condition monitoring system on a test rig platform.
Requirement analysis report and specification document’ (s’ouvre dans une nouvelle fenêtre)Report on available data, simulation models and methods, as well as the specification for future data acquisition /automation systems.
Development of measurement technique and experimental results (s’ouvre dans une nouvelle fenêtre)The established optical measurement technique using thermo-chromic liquid crystal method will be applied using Perspex models with appropriate scaling to laboratory conditions for new small-scale cooling configuration. It aims to provide a first database for design applications. With this, a general methodology for experimental evaluation of novel small-scale cooling configuration in relation to the investigations in Subtask 2.3.1 could be achieved.
Experimental results (s’ouvre dans une nouvelle fenêtre)The established optical measurement technique using thermo-chromic liquid crystal method will be applied using Perspex models with appropriate scaling to laboratory conditions for new small-scale cooling configuration. It aims to provide a first database for design applications. With this, a general methodology for experimental evaluation of novel small-scale cooling configuration in relation to the investigations in Subtask 2.3.1 could be achieved.
Exploitation of stretched design limits (s’ouvre dans une nouvelle fenêtre)Report on fracture mechanical behaviour of high temperature steels for steam turbine components (e.g. crack propagation, fracture toughness). The report will discuss methods for handling thermal and load history effects such as, for instance, warm pre-stressing with application to results obtained in the project. This deliverable refers to T3.3.
Remote Monitoring System (s’ouvre dans une nouvelle fenêtre)An online accessible computation and visualization SW module capable of detecting and visualizing the rub symptoms regarding the monitored turbine rotor; additional statistical algorithm allowing the expert to analyze the current rub symptoms from the perspective of previous historical data; Cloud oriented online SW (Remote Monitoring System) accessing the online data from turbine blades monitoring on multiple machines and computing the model based blade residual lifetime estimation for selected monitored turbine. Implementation of a SW module for rub detection in a prototypical way. Case study of the prototype used to analyze rub symptoms in turbine operation. Implementation of cloud oriented online SW for turbine blades monitoring and case study of blade residual lifetime estimation for selected turbine in operation. Deliverable relates to ST4.2.3
Public workshop presenting the final results of the TURBO-REFLEX project and providing an outlook of the necessary next development steps; connected with turbomachinery conference.
Public website (s’ouvre dans une nouvelle fenêtre)The aim of this deliverable is the creation of a public website to present the project in general as well as the partners. On the webiste, overview will be given of the approach and current results. The website will be maintained to the end of the project.
Intermediate workshop (s’ouvre dans une nouvelle fenêtre)The aim of this public workshop is to present preliminary results of the project, and to discuss the potential role of thermal power plants in the transition process towards a future low carbon energy sector, and the respective policy and research implications. Further, the workshop aims at establishing a dialogue between the consortium, relevant stakeholders and European policy makers.
Publications
Auteurs:
Kamal Abudu, Uyioghosa Igie, Ioannis Roumeliotis, Artur Szymanski, Giuseppina Di Lorenzo
Publié dans:
Applied Thermal Engineering, Numéro 180, 2020, Page(s) 115844, ISSN 1359-4311
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.applthermaleng.2020.115844
Auteurs:
Ahmed Azeez, Viktor Norman, Robert Eriksson, Daniel Leidermark, Johan Moverare
Publié dans:
International Journal of Fatigue, Numéro 149, 2021, Page(s) 106251, ISSN 0142-1123
Éditeur:
Elsevier BV
DOI:
10.1016/j.ijfatigue.2021.106251
Auteurs:
Kamal Abudu, Uyioghosa Igie, Orlando Minervino, Richard Hamilton
Publié dans:
Applied Thermal Engineering, Numéro 180, 2020, Page(s) 115869, ISSN 1359-4311
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.applthermaleng.2020.115869
Auteurs:
Artur Szymanski, Uyioghosa Igie, Kamal Abudu, Richard Hamilton
Publié dans:
Applied Thermal Engineering, Numéro 189, 2021, Page(s) 116697, ISSN 1359-4311
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.applthermaleng.2021.116697
Auteurs:
Ahmed Azeez, Robert Eriksson, Mattias Calmunger
Publié dans:
Procedia Structural Integrity, Numéro 23, 2019, Page(s) 155-160, ISSN 2452-3216
Éditeur:
Linköpings universitet
DOI:
10.1016/j.prostr.2020.01.079
Auteurs:
Ahmed Azeez, Robert Eriksson, Daniel Leidermark, Mattias Calmunger
Publié dans:
Theoretical and Applied Fracture Mechanics, Numéro 107, 2020, Page(s) 102510, ISSN 0167-8442
Éditeur:
Elsevier BV
DOI:
10.1016/j.tafmec.2020.102510
Auteurs:
Kamal Abudu, Uyioghosa Igie, Orlando Minervino, Richard Hamilton
Publié dans:
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2020, Page(s) 095765092093208, ISSN 0957-6509
Éditeur:
Professional Engineering Publishing Ltd.
DOI:
10.1177/0957650920932083
Auteurs:
Martin Nesládek, Milan Růžička, Maxim Lutovinov, Jiří Kuželka, Radek Procházka, Martin Rund, Petr Měšťánek
Publié dans:
Procedia Structural Integrity, Numéro 19, 2019, Page(s) 231-237, ISSN 2452-3216
Éditeur:
Elsevier
DOI:
10.1016/j.prostr.2019.12.025
Auteurs:
Jiří Kuželka, Martin Nesládek, Maxim Lutovinov, Josef Jurenka, Milan Růžička, Martin Rund, Petr Měšťánek
Publié dans:
Procedia Structural Integrity, Numéro 17, 2019, Page(s) 780-787, ISSN 2452-3216
Éditeur:
Elsevier BV
DOI:
10.1016/j.prostr.2019.08.104
Auteurs:
Tereza Dadáková, Zdeněk Kubín
Publié dans:
Acta Polytechnica CTU Proceedings, Numéro 20, 2018, Page(s) 29-33, ISSN 2336-5382
Éditeur:
Czech Technical University in Prague
DOI:
10.14311/app.2018.20.0029
Auteurs:
Stefano Gino Mosele, Tiziano Garbarino, Andrea Schneider, Lorenzo Cozzi, Andrea Arnone, Georgios Goinis, Simon Hedkvist
Publié dans:
E3S Web of Conferences, Numéro 113, 2019, Page(s) 01012, ISSN 2267-1242
Éditeur:
EDP Sciences
DOI:
10.1051/e3sconf/201911301012
Auteurs:
Kamal Abudu, Uyioghosa Igie, Ioannis Roumeliotis, Richard Hamilton
Publié dans:
Applied Thermal Engineering, Numéro 189, 2021, Page(s) 116703, ISSN 1359-4311
Éditeur:
Pergamon Press Ltd.
DOI:
10.1016/j.applthermaleng.2021.116703
Auteurs:
Ahmed Azeez, Robert Eriksson, Mattias Calmunger, Stefan B. Lindström, Kjell Simonsson
Publié dans:
Procedia Structural Integrity, Numéro 23, 2019, Page(s) 149-154, ISSN 2452-3216
Éditeur:
Elseview BV
DOI:
10.1016/j.prostr.2020.01.078
Auteurs:
Frank Mevissen, Michele Meo
Publié dans:
Aerospace, Numéro 7/6, 2020, Page(s) 72, ISSN 2226-4310
Éditeur:
MDPI
DOI:
10.3390/aerospace7060072
Auteurs:
Simon Hedkvist
Publié dans:
2019
Éditeur:
Luleå University of Technology Department of Engineering Sciences and Mathematic
Auteurs:
Ahmed Azeez
Publié dans:
2018
Éditeur:
Linköping University
Auteurs:
A. Azeez
Publié dans:
2021, ISBN 9789179296964
Éditeur:
Linköping Studies in Science and Technology. Licentiate Thesis, ISSN 0280-7971 ; 1900
DOI:
10.3384/lic.diva-173354
Auteurs:
Alexander Schwagerus, Peter Habisreuther, Nikolaos Zarzalis
Publié dans:
2021
Éditeur:
ASME Turbo Expo 2021
Auteurs:
Tobias Krille, Stefan Retzko, Rico Poser, Jens von Wolfersdorf
Publié dans:
Volume 7A: Heat Transfer, 2020, ISBN 978-0-7918-8416-4
Éditeur:
American Society of Mechanical Engineers
DOI:
10.1115/gt2020-16271
Auteurs:
M. Rund, J. Džugan, P. Konopík, M. Nesládek, J. Kuželka, M. Růžička, P. Měšťánek
Publié dans:
2021
Éditeur:
COMAT 2021
Auteurs:
C. Weis, A. Schwagerus, S. Faller, R. Bhagwan, P. Habisreuther, N. Zarzalis
Publié dans:
Conference: European Combustion Meeting – 2019, At Lisboa, Portugal, April 14-17, 2019, 2019
Éditeur:
Conference: European Combustion Meeting – 2019, At Lisboa, Portugal, April 14-17, 2019
Auteurs:
Martin Nesládek, Jiří Kuželka, Milan Růžička, Petr Měšťánek
Publié dans:
Zvyšování životnosti komponent energetických zařízení v elektrárnách, 2020
Éditeur:
Sborník z 15. konferenc
Auteurs:
"""C.Aalburg - GE, DE, A.Szymanski - CU, A.Schwagerus - KIT, J.Liska - UWB,
V.-.Cerny - DSPW, A.Wiedermann - MAN
O.Bernstrauch - SPG, M.Benvenuto - AEN"""
Publié dans:
2021
Éditeur:
European Turbomachinery Conference
Auteurs:
Robbin Bhagwan, Alexander Schwagerus, Christof Weis, Peter Habisreuther, Nikolaos Zarzalis, Michael Huth, Berthold Koestlin, Stefan Dederichs
Publié dans:
Volume 4A: Combustion, Fuels, and Emissions, 2019, ISBN 978-0-7918-5861-5
Éditeur:
American Society of Mechanical Engineers
DOI:
10.1115/gt2019-90286
Auteurs:
Andrzej Krupa, Magdalena Mieloszyk, Tomasz Wandowski, Maciej Malicki
Publié dans:
Health Monitoring of Structural and Biological Systems XV, 2021, Page(s) 92, ISBN 9781510640160
Éditeur:
SPIE
DOI:
10.1117/12.2581352
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible