Leistungen
Experimental validation of the flow control technology using the HighSpeed Research Compressor rig at TUM and quantification of the performance benefit and it comparison against numerical predictionReportout will include the speedline of the compressor traverse data pressure temperature velocities and flow angles at intrastage planes Deliverable relates to T11
Analysis of operation performance of the condition monitoring systemEvaluation of data generated by condition monitoring system during routine operation (in test rig) as well as specific test cases if applicable. The report contains results of real engine data during routine operation. Data will be evaluated and the condition based monitoring scheme verified. This deliverable belongs to Task 4.1
Model development and validationA report showing the combustor characteristics of 3D CFD model with performance and predictions comparable to available combustor data. The aim is to match model and data as close as possible to baseline. This relates to Task 2.2.
Design and verification of modelA report showing performance characteristics of 3D compressor model compared with predictions of a reference compressor. The aim is to obtain a compressor model that is indicative of the reference compressor performance at baseline. This relates to Task 1.3.
Layman’s report on performance and flexibility improvements and their economic impactThis deliverable refers to Tasks 5.1, 5.2 and 5.3. The aim of the deliverable is to publish a public report, which describes the key achievements of TURBO-REFLEX consortium in the improvements of performance and flexibility in the power plants under consideration and their expected economic impact in the electricity market.
Rotor life evaluation systemThermal stress and life expenditure module ready for implementation in the Turbine Control System. A modified thermal stress and life expenditure module will be ready to be implemented in the TCS to assess the remaining life of the turbine according to actual operational steam parameters and flow conditions in turbine inlet. The implementation in the TCS itself is outside the scope of the project. Deliverable relates to ST4.2.2
Plant baseline modelReport that describes baseline models and operating profile for OCGT, CCGT, steam and aero GT power plant modelling. - Determination of a generic heavy duty GT and aero GT model to be used as baseline for the investigations after coordination with all partners - Determination of OCGT, CCGT and steam cycle model to be used as baseline for the investigations after coordination with all partners Deliverable relates to Task 5.1 and Task 5.2
Dissemination and exploitation planReport describing the measures to be taken to increase public awareness for the project and widely distribute project results to different target audiences. Further, the plan will provide the strategic exploitation plan carried out jointly from Consortium partners and individually by the industry partners. Finally, the measures and mechanisms that have will be established in order to protect foreground and determine how they will be used will be part of the plan. The document will be updated continuously and made available to the full consortium.
Implemented and validated condition monitoring system at rig engineFunctioning and tested condition monitoring system on a test rig platform.
Requirement analysis report and specification document’Report on available data, simulation models and methods, as well as the specification for future data acquisition /automation systems.
Development of measurement technique and experimental resultsThe established optical measurement technique using thermo-chromic liquid crystal method will be applied using Perspex models with appropriate scaling to laboratory conditions for new small-scale cooling configuration. It aims to provide a first database for design applications. With this, a general methodology for experimental evaluation of novel small-scale cooling configuration in relation to the investigations in Subtask 2.3.1 could be achieved.
Experimental resultsThe established optical measurement technique using thermo-chromic liquid crystal method will be applied using Perspex models with appropriate scaling to laboratory conditions for new small-scale cooling configuration. It aims to provide a first database for design applications. With this, a general methodology for experimental evaluation of novel small-scale cooling configuration in relation to the investigations in Subtask 2.3.1 could be achieved.
Exploitation of stretched design limitsReport on fracture mechanical behaviour of high temperature steels for steam turbine components (e.g. crack propagation, fracture toughness). The report will discuss methods for handling thermal and load history effects such as, for instance, warm pre-stressing with application to results obtained in the project. This deliverable refers to T3.3.
Remote Monitoring SystemAn online accessible computation and visualization SW module capable of detecting and visualizing the rub symptoms regarding the monitored turbine rotor; additional statistical algorithm allowing the expert to analyze the current rub symptoms from the perspective of previous historical data; Cloud oriented online SW (Remote Monitoring System) accessing the online data from turbine blades monitoring on multiple machines and computing the model based blade residual lifetime estimation for selected monitored turbine. Implementation of a SW module for rub detection in a prototypical way. Case study of the prototype used to analyze rub symptoms in turbine operation. Implementation of cloud oriented online SW for turbine blades monitoring and case study of blade residual lifetime estimation for selected turbine in operation. Deliverable relates to ST4.2.3
Public workshop presenting the final results of the TURBO-REFLEX project and providing an outlook of the necessary next development steps; connected with turbomachinery conference.
Public websiteThe aim of this deliverable is the creation of a public website to present the project in general as well as the partners. On the webiste, overview will be given of the approach and current results. The website will be maintained to the end of the project.
Intermediate workshopThe aim of this public workshop is to present preliminary results of the project, and to discuss the potential role of thermal power plants in the transition process towards a future low carbon energy sector, and the respective policy and research implications. Further, the workshop aims at establishing a dialogue between the consortium, relevant stakeholders and European policy makers.
Veröffentlichungen
Autoren:
Kamal Abudu, Uyioghosa Igie, Ioannis Roumeliotis, Artur Szymanski, Giuseppina Di Lorenzo
Veröffentlicht in:
Applied Thermal Engineering, Ausgabe 180, 2020, Seite(n) 115844, ISSN 1359-4311
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.applthermaleng.2020.115844
Autoren:
Ahmed Azeez, Viktor Norman, Robert Eriksson, Daniel Leidermark, Johan Moverare
Veröffentlicht in:
International Journal of Fatigue, Ausgabe 149, 2021, Seite(n) 106251, ISSN 0142-1123
Herausgeber:
Elsevier BV
DOI:
10.1016/j.ijfatigue.2021.106251
Autoren:
Kamal Abudu, Uyioghosa Igie, Orlando Minervino, Richard Hamilton
Veröffentlicht in:
Applied Thermal Engineering, Ausgabe 180, 2020, Seite(n) 115869, ISSN 1359-4311
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.applthermaleng.2020.115869
Autoren:
Artur Szymanski, Uyioghosa Igie, Kamal Abudu, Richard Hamilton
Veröffentlicht in:
Applied Thermal Engineering, Ausgabe 189, 2021, Seite(n) 116697, ISSN 1359-4311
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.applthermaleng.2021.116697
Autoren:
Ahmed Azeez, Robert Eriksson, Mattias Calmunger
Veröffentlicht in:
Procedia Structural Integrity, Ausgabe 23, 2019, Seite(n) 155-160, ISSN 2452-3216
Herausgeber:
Linköpings universitet
DOI:
10.1016/j.prostr.2020.01.079
Autoren:
Ahmed Azeez, Robert Eriksson, Daniel Leidermark, Mattias Calmunger
Veröffentlicht in:
Theoretical and Applied Fracture Mechanics, Ausgabe 107, 2020, Seite(n) 102510, ISSN 0167-8442
Herausgeber:
Elsevier BV
DOI:
10.1016/j.tafmec.2020.102510
Autoren:
Kamal Abudu, Uyioghosa Igie, Orlando Minervino, Richard Hamilton
Veröffentlicht in:
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2020, Seite(n) 095765092093208, ISSN 0957-6509
Herausgeber:
Professional Engineering Publishing Ltd.
DOI:
10.1177/0957650920932083
Autoren:
Martin Nesládek, Milan Růžička, Maxim Lutovinov, Jiří Kuželka, Radek Procházka, Martin Rund, Petr Měšťánek
Veröffentlicht in:
Procedia Structural Integrity, Ausgabe 19, 2019, Seite(n) 231-237, ISSN 2452-3216
Herausgeber:
Elsevier
DOI:
10.1016/j.prostr.2019.12.025
Autoren:
Jiří Kuželka, Martin Nesládek, Maxim Lutovinov, Josef Jurenka, Milan Růžička, Martin Rund, Petr Měšťánek
Veröffentlicht in:
Procedia Structural Integrity, Ausgabe 17, 2019, Seite(n) 780-787, ISSN 2452-3216
Herausgeber:
Elsevier BV
DOI:
10.1016/j.prostr.2019.08.104
Autoren:
Tereza Dadáková, Zdeněk Kubín
Veröffentlicht in:
Acta Polytechnica CTU Proceedings, Ausgabe 20, 2018, Seite(n) 29-33, ISSN 2336-5382
Herausgeber:
Czech Technical University in Prague
DOI:
10.14311/app.2018.20.0029
Autoren:
Stefano Gino Mosele, Tiziano Garbarino, Andrea Schneider, Lorenzo Cozzi, Andrea Arnone, Georgios Goinis, Simon Hedkvist
Veröffentlicht in:
E3S Web of Conferences, Ausgabe 113, 2019, Seite(n) 01012, ISSN 2267-1242
Herausgeber:
EDP Sciences
DOI:
10.1051/e3sconf/201911301012
Autoren:
Kamal Abudu, Uyioghosa Igie, Ioannis Roumeliotis, Richard Hamilton
Veröffentlicht in:
Applied Thermal Engineering, Ausgabe 189, 2021, Seite(n) 116703, ISSN 1359-4311
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.applthermaleng.2021.116703
Autoren:
Ahmed Azeez, Robert Eriksson, Mattias Calmunger, Stefan B. Lindström, Kjell Simonsson
Veröffentlicht in:
Procedia Structural Integrity, Ausgabe 23, 2019, Seite(n) 149-154, ISSN 2452-3216
Herausgeber:
Elseview BV
DOI:
10.1016/j.prostr.2020.01.078
Autoren:
Frank Mevissen, Michele Meo
Veröffentlicht in:
Aerospace, Ausgabe 7/6, 2020, Seite(n) 72, ISSN 2226-4310
Herausgeber:
MDPI
DOI:
10.3390/aerospace7060072
Autoren:
Simon Hedkvist
Veröffentlicht in:
2019
Herausgeber:
Luleå University of Technology Department of Engineering Sciences and Mathematic
Autoren:
Ahmed Azeez
Veröffentlicht in:
2018
Herausgeber:
Linköping University
Autoren:
A. Azeez
Veröffentlicht in:
2021, ISBN 9789179296964
Herausgeber:
Linköping Studies in Science and Technology. Licentiate Thesis, ISSN 0280-7971 ; 1900
DOI:
10.3384/lic.diva-173354
Autoren:
Alexander Schwagerus, Peter Habisreuther, Nikolaos Zarzalis
Veröffentlicht in:
2021
Herausgeber:
ASME Turbo Expo 2021
Autoren:
Tobias Krille, Stefan Retzko, Rico Poser, Jens von Wolfersdorf
Veröffentlicht in:
Volume 7A: Heat Transfer, 2020, ISBN 978-0-7918-8416-4
Herausgeber:
American Society of Mechanical Engineers
DOI:
10.1115/gt2020-16271
Autoren:
M. Rund, J. Džugan, P. Konopík, M. Nesládek, J. Kuželka, M. Růžička, P. Měšťánek
Veröffentlicht in:
2021
Herausgeber:
COMAT 2021
Autoren:
C. Weis, A. Schwagerus, S. Faller, R. Bhagwan, P. Habisreuther, N. Zarzalis
Veröffentlicht in:
Conference: European Combustion Meeting – 2019, At Lisboa, Portugal, April 14-17, 2019, 2019
Herausgeber:
Conference: European Combustion Meeting – 2019, At Lisboa, Portugal, April 14-17, 2019
Autoren:
Martin Nesládek, Jiří Kuželka, Milan Růžička, Petr Měšťánek
Veröffentlicht in:
Zvyšování životnosti komponent energetických zařízení v elektrárnách, 2020
Herausgeber:
Sborník z 15. konferenc
Autoren:
"""C.Aalburg - GE, DE, A.Szymanski - CU, A.Schwagerus - KIT, J.Liska - UWB,
V.-.Cerny - DSPW, A.Wiedermann - MAN
O.Bernstrauch - SPG, M.Benvenuto - AEN"""
Veröffentlicht in:
2021
Herausgeber:
European Turbomachinery Conference
Autoren:
Robbin Bhagwan, Alexander Schwagerus, Christof Weis, Peter Habisreuther, Nikolaos Zarzalis, Michael Huth, Berthold Koestlin, Stefan Dederichs
Veröffentlicht in:
Volume 4A: Combustion, Fuels, and Emissions, 2019, ISBN 978-0-7918-5861-5
Herausgeber:
American Society of Mechanical Engineers
DOI:
10.1115/gt2019-90286
Autoren:
Andrzej Krupa, Magdalena Mieloszyk, Tomasz Wandowski, Maciej Malicki
Veröffentlicht in:
Health Monitoring of Structural and Biological Systems XV, 2021, Seite(n) 92, ISBN 9781510640160
Herausgeber:
SPIE
DOI:
10.1117/12.2581352
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor