Resultado final
Open data management plan, updated throughout the project, whenever important changes to the project occur due to inclusion of new data sets, changes in consortium policies or external factors.
Open data repository reportModel implementation report (D3.3)
Dissemination reportDissemination reports (M12, M24) will also be provided for internal follow up as CO, not as official deliverables. Final dissemination report (official deliverable) is due M36.
Standardization and interoperability reportLCC: screening test report
IPR registry
Model implementation report (II)
Model implementation report (D3.3)
LCA: system boundaries and functional unit test definitionKnowledge based and cloud deployment report
Scheduling algorithm validation report (I)
Scheduling algorithm validation report v1
Embedded sensor requirements specificationsEcosystem report
Report on ecosystem around the project technologies within the target industries (and beyond.
AR/PLIV requirement specificationsAR & PLIV evaluation report
Target parameter selection report
LCA: screening test report
Safety Monitoring Report
LCC: system boundaries and functional unit test definition
Scheduling model report (I)
Scheduling model report
Project Quality HandbookEstablishment of project management procedures is the very first action in WP1 - Project management. The Project Quality Handbook gives a practical guidance to coordinator, coordinating bodies and project partners for project management and administration.
System QA and test report (I) and Documentation (II)System QA and test report (D6.5.1) and Documentation (D6.5.2)
Project website (PU), including internal project repository for CO.
Publicaciones
Autores:
Vaamonde-Rivas, Manuel; Febrero-Bande, Manuel; Pateiro-López, Beatriz
Publicado en:
Journal of Quality in Manufacturing Engineering, 2021
Editor:
Journal of Quality in Manufacturing Engineering
DOI:
10.5281/zenodo.4556819
Autores:
Vaamonde-Rivas, Manuel; Monsalve-Cobis, Abelardo; Pardo-Fernández, Juan Carlos; de Uña-Álvarez, Jacobo
Publicado en:
Journal of Quality in Manufacturing Engineering, 2021
Editor:
Journal of Quality in Manufacturing Engineering
DOI:
10.5281/zenodo.4557168
Autores:
Maximilian Benker, Robin Kleinwort, Michael F. Zah
Publicado en:
2019 IEEE International Conference on Prognostics and Health Management (ICPHM), 2019, Página(s) 1-7, ISBN 978-1-5386-8357-6
Editor:
IEEE International Conference on Prognostics and Health Management 2019
DOI:
10.1109/icphm.2019.8819445
Autores:
Mario Lorenz, Sebastian Knopp, Jisu Kim, Philipp Klimant
Publicado en:
2020 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), 2020, Página(s) 203-205, ISBN 978-1-7281-7675-8
Editor:
IEEE
DOI:
10.1109/ismar-adjunct51615.2020.00060
Autores:
Simon Zhai, Alexander Riess, Gunther Reinhart
Publicado en:
2019 IEEE International Conference on Prognostics and Health Management (ICPHM), 2019, Página(s) 1-8, ISBN 978-1-5386-8357-6
Editor:
IEEE International Conference on Prognostics and Health Management 2019
DOI:
10.1109/icphm.2019.8819397
Autores:
Al-Najjar, Basim; Algabroun, Hatem; Jonsson, Mikael
Publicado en:
"Conference on ""Role of Industrial Engineering in Industry 4.0 Paradigm"" (ICIEIND)", Edición 27-30/09/2018, 2018, Página(s) 1-6
Editor:
ICIEIND
Autores:
Mario Lorenz, Sebastian Knopp, Philipp Klimant
Publicado en:
2018 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), 2018, Página(s) 151-153, ISBN 978-1-5386-7592-2
Editor:
IEEE
DOI:
10.1109/ismar-adjunct.2018.00055
Autores:
Jisu Kim, Mario Lorenz, Sebastian Knopp, Philipp Klimant
Publicado en:
2020 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), 2020, Página(s) 67-69, ISBN 978-1-7281-7675-8
Editor:
IEEE
DOI:
10.1109/ismar-adjunct51615.2020.00032
Autores:
Hatem Algabroun
Publicado en:
2020, ISBN 978-91-89081-94-9
Editor:
Linnaeus University Press
Autores:
Maximilian Benker, Lukas Furtner, Thomas Semm, Michael F. Zaeh
Publicado en:
Journal of Manufacturing Systems, 2020, ISSN 0278-6125
Editor:
Elsevier BV
DOI:
10.1016/j.jmsy.2020.11.005
Autores:
Hatem Algabroun, Basim Al-Najjar, Mikael Jonsson
Publicado en:
IFAC-PapersOnLine, Edición 53/3, 2020, Página(s) 185-190, ISSN 2405-8963
Editor:
Elsevier
DOI:
10.1016/j.ifacol.2020.11.030
Autores:
Johannes Ellinger, Maximilian Benker, James Rowe, Robin Kleinwort, Michael F. Zäh, Sebastian Unsleber
Publicado en:
ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Edición 114/3, 2019, Página(s) 115-118, ISSN 0947-0085
Editor:
Carl Hanser Verlag GmbH & Co.
DOI:
10.3139/104.112046
Autores:
Simon Zhai, Gunther Reinhart
Publicado en:
ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Edición 113/5, 2018, Página(s) 298-301, ISSN 0947-0085
Editor:
Carl Hanser Verlag GmbH & Co.
DOI:
10.3139/104.111912
Autores:
Hatem Algabroun
Publicado en:
Microsystem Technologies, 2019, ISSN 0946-7076
Editor:
Springer Verlag
DOI:
10.1007/s00542-019-04631-9
Autores:
Hatem Algabroun, Jon Bokrantz, Basim Al-Najjar, Anders Skoogh
Publicado en:
Journal of Quality in Maintenance Engineering, Edición ahead-of-print/ahead-of-print, 2020, ISSN 1355-2511
Editor:
Emerald Group Publishing Ltd.
DOI:
10.1108/jqme-04-2019-0039
Autores:
J. Ellinger, T. Semm, M. Benker, P. Kapfinger, R. Kleinwort, M.F. Zah
Publicado en:
MM Science Journal, Edición 2019/04, 2019, Página(s) 3206-3213, ISSN 1803-1269
Editor:
MM Publishing
DOI:
10.17973/mmsj.2019_11_2019072
Autores:
Basim Al-Najjar, Hatem Algabroun, Mikael Jonsson
Publicado en:
Journal of Engineering Research and Application, Edición 8(11), 2018, Página(s) 20-31, ISSN 2248-9622
Editor:
IJERA
DOI:
10.9790/9622-0811022031
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles