Predictive Cognitive Maintenance Decision Support System

Rezultaty

Open data management plan, updated throughout the project, whenever important changes to the project occur due to inclusion of new data sets, changes in consortium policies or external factors.

Open data repository report

Model implementation report (I)

Model implementation report (D3.3)

Dissemination report

Dissemination reports (M12, M24) will also be provided for internal follow up as CO, not as official deliverables. Final dissemination report (official deliverable) is due M36.

Standardization and interoperability report
LCC: screening test report
IPR registry
Model implementation report (II)

Model implementation report (D3.3)

LCA: system boundaries and functional unit test definition
Knowledge based and cloud deployment report
Scheduling algorithm validation report (I)

Scheduling algorithm validation report v1

Embedded sensor requirements specifications
Ecosystem report

Report on ecosystem around the project technologies within the target industries (and beyond.

AR/PLIV requirement specifications
AR & PLIV evaluation report
Target parameter selection report
LCA: screening test report
Safety Monitoring Report
LCC: system boundaries and functional unit test definition
Scheduling model report (I)

Scheduling model report

Project Quality Handbook

Establishment of project management procedures is the very first action in WP1 - Project management. The Project Quality Handbook gives a practical guidance to coordinator, coordinating bodies and project partners for project management and administration.

System QA and test report (I) and Documentation (II)

System QA and test report (D6.5.1) and Documentation (D6.5.2)

Project website (including internal project repository)

Project website (PU), including internal project repository for CO.

Publikacje

Time Series Analysis Application on Industry 4.0: PreCoM Project

Autorzy: Vaamonde-Rivas, Manuel; Febrero-Bande, Manuel; Pateiro-López, Beatriz
Opublikowane w: Journal of Quality in Manufacturing Engineering, 2021
Wydawca: Journal of Quality in Manufacturing Engineering
DOI: 10.5281/zenodo.4556819

Software module based on lifetime analysis for a predictive maintenance decision-support system

Autorzy: Vaamonde-Rivas, Manuel; Monsalve-Cobis, Abelardo; Pardo-Fernández, Juan Carlos; de Uña-Álvarez, Jacobo
Opublikowane w: Journal of Quality in Manufacturing Engineering, 2021
Wydawca: Journal of Quality in Manufacturing Engineering
DOI: 10.5281/zenodo.4557168

Estimating remaining useful life of machine tool ball screws via probabilistic classification

Autorzy: Maximilian Benker, Robin Kleinwort, Michael F. Zah
Opublikowane w: 2019 IEEE International Conference on Prognostics and Health Management (ICPHM), 2019, Strona(/y) 1-7, ISBN 978-1-5386-8357-6
Wydawca: IEEE International Conference on Prognostics and Health Management 2019
DOI: 10.1109/icphm.2019.8819445

Industrial Augmented Reality: 3D-Content Editor for Augmented Reality Maintenance Worker Support System

Autorzy: Mario Lorenz, Sebastian Knopp, Jisu Kim, Philipp Klimant
Opublikowane w: 2020 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), 2020, Strona(/y) 203-205, ISBN 978-1-7281-7675-8
Wydawca: IEEE
DOI: 10.1109/ismar-adjunct51615.2020.00060

Formulation and Solution for the Predictive Maintenance Integrated Job Shop Scheduling Problem

Autorzy: Simon Zhai, Alexander Riess, Gunther Reinhart
Opublikowane w: 2019 IEEE International Conference on Prognostics and Health Management (ICPHM), 2019, Strona(/y) 1-8, ISBN 978-1-5386-8357-6
Wydawca: IEEE International Conference on Prognostics and Health Management 2019
DOI: 10.1109/icphm.2019.8819397

Smart Maintenance Model using Cyber Physical System

Autorzy: Al-Najjar, Basim; Algabroun, Hatem; Jonsson, Mikael
Opublikowane w: "Conference on ""Role of Industrial Engineering in Industry 4.0 Paradigm"" (ICIEIND)", Numer 27-30/09/2018, 2018, Strona(/y) 1-6
Wydawca: ICIEIND

Industrial Augmented Reality: Requirements for an Augmented Reality Maintenance Worker Support System

Autorzy: Mario Lorenz, Sebastian Knopp, Philipp Klimant
Opublikowane w: 2018 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), 2018, Strona(/y) 151-153, ISBN 978-1-5386-7592-2
Wydawca: IEEE
DOI: 10.1109/ismar-adjunct.2018.00055

Industrial Augmented Reality: Concepts and User Interface Designs for Augmented Reality Maintenance Worker Support Systems

Autorzy: Jisu Kim, Mario Lorenz, Sebastian Knopp, Philipp Klimant
Opublikowane w: 2020 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), 2020, Strona(/y) 67-69, ISBN 978-1-7281-7675-8
Wydawca: IEEE
DOI: 10.1109/ismar-adjunct51615.2020.00032

On the development of a new digitalised maintenance approach for factories of the future

Autorzy: Hatem Algabroun
Opublikowane w: 2020, ISBN 978-91-89081-94-9
Wydawca: Linnaeus University Press

Utilizing uncertainty information in remaining useful life estimation via Bayesian neural networks and Hamiltonian Monte Carlo

Autorzy: Maximilian Benker, Lukas Furtner, Thomas Semm, Michael F. Zaeh
Opublikowane w: Journal of Manufacturing Systems, 2020, ISSN 0278-6125
Wydawca: Elsevier BV
DOI: 10.1016/j.jmsy.2020.11.005

A framework for the integration of digitalised maintenance systems with relevant working areas: A case study

Autorzy: Hatem Algabroun, Basim Al-Najjar, Mikael Jonsson
Opublikowane w: IFAC-PapersOnLine, Numer 53/3, 2020, Strona(/y) 185-190, ISSN 2405-8963
Wydawca: Elsevier
DOI: 10.1016/j.ifacol.2020.11.030

Zustandsüberwachung von Vorschubantrieben mithilfe eingebetteter Sensoren

Autorzy: Johannes Ellinger, Maximilian Benker, James Rowe, Robin Kleinwort, Michael F. Zäh, Sebastian Unsleber
Opublikowane w: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Numer 114/3, 2019, Strona(/y) 115-118, ISSN 0947-0085
Wydawca: Carl Hanser Verlag GmbH & Co.
DOI: 10.3139/104.112046

Predictive Maintenance als Wegbereiter für die instandhaltungsgerechte Produktionssteuerung

Autorzy: Simon Zhai, Gunther Reinhart
Opublikowane w: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Numer 113/5, 2018, Strona(/y) 298-301, ISSN 0947-0085
Wydawca: Carl Hanser Verlag GmbH & Co.
DOI: 10.3139/104.111912

Dynamic sampling rate algorithm (DSRA) implemented in self-adaptive software architecture: a way to reduce the energy consumption of wireless sensors through event-based sampling

Autorzy: Hatem Algabroun
Opublikowane w: Microsystem Technologies, 2019, ISSN 0946-7076
Wydawca: Springer Verlag
DOI: 10.1007/s00542-019-04631-9

Development of digitalised maintenance – a concept

Autorzy: Hatem Algabroun, Jon Bokrantz, Basim Al-Najjar, Anders Skoogh
Opublikowane w: Journal of Quality in Maintenance Engineering, Numer ahead-of-print/ahead-of-print, 2020, ISSN 1355-2511
Wydawca: Emerald Group Publishing Ltd.
DOI: 10.1108/jqme-04-2019-0039

FEED DRIVE CONDITION MONITORING USING MODAL PARAMETERS

Autorzy: J. Ellinger, T. Semm, M. Benker, P. Kapfinger, R. Kleinwort, M.F. Zah
Opublikowane w: MM Science Journal, Numer 2019/04, 2019, Strona(/y) 3206-3213, ISSN 1803-1269
Wydawca: MM Publishing
DOI: 10.17973/mmsj.2019_11_2019072

Maintenance 4.0 to fulfil the demands of Industry 4.0 and Factory of the Future

Autorzy: Basim Al-Najjar, Hatem Algabroun, Mikael Jonsson
Opublikowane w: Journal of Engineering Research and Application, Numer 8(11), 2018, Strona(/y) 20-31, ISSN 2248-9622
Wydawca: IJERA
DOI: 10.9790/9622-0811022031

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz