Leistungen
Open data management plan, updated throughout the project, whenever important changes to the project occur due to inclusion of new data sets, changes in consortium policies or external factors.
Open data repository reportModel implementation report (D3.3)
Dissemination reportDissemination reports (M12, M24) will also be provided for internal follow up as CO, not as official deliverables. Final dissemination report (official deliverable) is due M36.
Standardization and interoperability reportLCC: screening test report
IPR registry
Model implementation report (II)
Model implementation report (D3.3)
LCA: system boundaries and functional unit test definitionKnowledge based and cloud deployment report
Scheduling algorithm validation report (I)
Scheduling algorithm validation report v1
Embedded sensor requirements specificationsEcosystem report
Report on ecosystem around the project technologies within the target industries (and beyond.
AR/PLIV requirement specificationsAR & PLIV evaluation report
Target parameter selection report
LCA: screening test report
Safety Monitoring Report
LCC: system boundaries and functional unit test definition
Scheduling model report (I)
Scheduling model report
Project Quality HandbookEstablishment of project management procedures is the very first action in WP1 - Project management. The Project Quality Handbook gives a practical guidance to coordinator, coordinating bodies and project partners for project management and administration.
System QA and test report (I) and Documentation (II)System QA and test report (D6.5.1) and Documentation (D6.5.2)
Project website (PU), including internal project repository for CO.
Veröffentlichungen
Autoren:
Vaamonde-Rivas, Manuel; Febrero-Bande, Manuel; Pateiro-López, Beatriz
Veröffentlicht in:
Journal of Quality in Manufacturing Engineering, 2021
Herausgeber:
Journal of Quality in Manufacturing Engineering
DOI:
10.5281/zenodo.4556819
Autoren:
Vaamonde-Rivas, Manuel; Monsalve-Cobis, Abelardo; Pardo-Fernández, Juan Carlos; de Uña-Álvarez, Jacobo
Veröffentlicht in:
Journal of Quality in Manufacturing Engineering, 2021
Herausgeber:
Journal of Quality in Manufacturing Engineering
DOI:
10.5281/zenodo.4557168
Autoren:
Maximilian Benker, Robin Kleinwort, Michael F. Zah
Veröffentlicht in:
2019 IEEE International Conference on Prognostics and Health Management (ICPHM), 2019, Seite(n) 1-7, ISBN 978-1-5386-8357-6
Herausgeber:
IEEE International Conference on Prognostics and Health Management 2019
DOI:
10.1109/icphm.2019.8819445
Autoren:
Mario Lorenz, Sebastian Knopp, Jisu Kim, Philipp Klimant
Veröffentlicht in:
2020 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), 2020, Seite(n) 203-205, ISBN 978-1-7281-7675-8
Herausgeber:
IEEE
DOI:
10.1109/ismar-adjunct51615.2020.00060
Autoren:
Simon Zhai, Alexander Riess, Gunther Reinhart
Veröffentlicht in:
2019 IEEE International Conference on Prognostics and Health Management (ICPHM), 2019, Seite(n) 1-8, ISBN 978-1-5386-8357-6
Herausgeber:
IEEE International Conference on Prognostics and Health Management 2019
DOI:
10.1109/icphm.2019.8819397
Autoren:
Al-Najjar, Basim; Algabroun, Hatem; Jonsson, Mikael
Veröffentlicht in:
"Conference on ""Role of Industrial Engineering in Industry 4.0 Paradigm"" (ICIEIND)", Ausgabe 27-30/09/2018, 2018, Seite(n) 1-6
Herausgeber:
ICIEIND
Autoren:
Mario Lorenz, Sebastian Knopp, Philipp Klimant
Veröffentlicht in:
2018 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), 2018, Seite(n) 151-153, ISBN 978-1-5386-7592-2
Herausgeber:
IEEE
DOI:
10.1109/ismar-adjunct.2018.00055
Autoren:
Jisu Kim, Mario Lorenz, Sebastian Knopp, Philipp Klimant
Veröffentlicht in:
2020 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), 2020, Seite(n) 67-69, ISBN 978-1-7281-7675-8
Herausgeber:
IEEE
DOI:
10.1109/ismar-adjunct51615.2020.00032
Autoren:
Hatem Algabroun
Veröffentlicht in:
2020, ISBN 978-91-89081-94-9
Herausgeber:
Linnaeus University Press
Autoren:
Maximilian Benker, Lukas Furtner, Thomas Semm, Michael F. Zaeh
Veröffentlicht in:
Journal of Manufacturing Systems, 2020, ISSN 0278-6125
Herausgeber:
Elsevier BV
DOI:
10.1016/j.jmsy.2020.11.005
Autoren:
Hatem Algabroun, Basim Al-Najjar, Mikael Jonsson
Veröffentlicht in:
IFAC-PapersOnLine, Ausgabe 53/3, 2020, Seite(n) 185-190, ISSN 2405-8963
Herausgeber:
Elsevier
DOI:
10.1016/j.ifacol.2020.11.030
Autoren:
Johannes Ellinger, Maximilian Benker, James Rowe, Robin Kleinwort, Michael F. Zäh, Sebastian Unsleber
Veröffentlicht in:
ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Ausgabe 114/3, 2019, Seite(n) 115-118, ISSN 0947-0085
Herausgeber:
Carl Hanser Verlag GmbH & Co.
DOI:
10.3139/104.112046
Autoren:
Simon Zhai, Gunther Reinhart
Veröffentlicht in:
ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Ausgabe 113/5, 2018, Seite(n) 298-301, ISSN 0947-0085
Herausgeber:
Carl Hanser Verlag GmbH & Co.
DOI:
10.3139/104.111912
Autoren:
Hatem Algabroun
Veröffentlicht in:
Microsystem Technologies, 2019, ISSN 0946-7076
Herausgeber:
Springer Verlag
DOI:
10.1007/s00542-019-04631-9
Autoren:
Hatem Algabroun, Jon Bokrantz, Basim Al-Najjar, Anders Skoogh
Veröffentlicht in:
Journal of Quality in Maintenance Engineering, Ausgabe ahead-of-print/ahead-of-print, 2020, ISSN 1355-2511
Herausgeber:
Emerald Group Publishing Ltd.
DOI:
10.1108/jqme-04-2019-0039
Autoren:
J. Ellinger, T. Semm, M. Benker, P. Kapfinger, R. Kleinwort, M.F. Zah
Veröffentlicht in:
MM Science Journal, Ausgabe 2019/04, 2019, Seite(n) 3206-3213, ISSN 1803-1269
Herausgeber:
MM Publishing
DOI:
10.17973/mmsj.2019_11_2019072
Autoren:
Basim Al-Najjar, Hatem Algabroun, Mikael Jonsson
Veröffentlicht in:
Journal of Engineering Research and Application, Ausgabe 8(11), 2018, Seite(n) 20-31, ISSN 2248-9622
Herausgeber:
IJERA
DOI:
10.9790/9622-0811022031
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor