Obiettivo
Coil coating is an important industrial process applied in a major part of industrial steel and metal alloy production and associated with big facilities and large primary energy consumption. A major part of the overall plant size and the energy demand of coil coating facilities is associated with the drying/curing process that occur inside a curing oven, which is the bottleneck concerning the increase of the production capacity. In this drying/curing process, organic solvents are vaporized from the applied liquid coating film and since they are flammable, the usually applied curing ovens with convective air drying technology have to be operated far below the Low Explosive Limit (LEL), due to safety constraints. ECCO proposes a novel solution for the curing oven operation, which can not only drastically increase the compactness and energetic efficiency of the system, but leads to an increased production flexibility due to a fuel-flexible, modular and potentially energetically self-sustainable process. The main idea is to heat the metal strip by IR-radiation and operate the curing oven well above the Upper Explosive Limit (UEL), thus, performing the drying and curing process in an atmosphere mainly consisting of the solvent vapours, which are used as fuel in IR radiant porous burners. This solution leads to a size/ production capacity ratio reduction of 70% and a reduction of investment and operating costs of at least 40% each. Starting from previous activities at TRL 4, an interdisciplinary approach is foreseen, based on advanced-materials, combustion technology and prediction tools for system design/optimization, with active participation of key industrial stakeholders, to bring this technology to TRL 6 and realize a prototype furnace at industrially relevant size and environment.
Campo scientifico
- engineering and technologymaterials engineeringcomposites
- natural scienceschemical sciencesorganic chemistryvolatile organic compounds
- engineering and technologyenvironmental engineeringenergy and fuelsfossil energynatural gas
- engineering and technologymaterials engineeringcoating and films
- engineering and technologymechanical engineeringmanufacturing engineeringadditive manufacturing
Programma(i)
Argomento(i)
Meccanismo di finanziamento
IA - Innovation actionCoordinatore
76131 Karlsruhe
Germania