European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

Demonstration of a disruptive rotor blade concept for large wind turbines

Objetivo

Wind energy is the fastest growing renewable energy source in Europe, accounting for 10.2% of total electricity in 2015, however there is still a need to reduce the overall cost of energy – CoE to increase its competitiveness. The capital costs represents 78% of CoE and can be broken down into several categories, with around 54% attributable to wind turbine, from which the blades represents 30%.

CoE can be reduced by maximizing energy production for the site by installing larger turbines. However, as the length of current rotor blades increase, their associated cost and weight increase at a faster rate than the turbine’s power output. Furthermore, as blades get longer they are becoming increasingly more difficult to manufacture and transport setting the limit at 90m.

Winfoor (WF) and Marstrom (MC) aim to pursue this market opportunity by bringing to market its innovative and ground-breaking blade technology – Triblade. Triblade is a “3-in-1” modular blade, built as a Composite Material Truss that will allow rotor blades to be longer (up to 50%), stiffer (up to 290%) and lighter (up to 78%), whilst reducing around 65.2% production costs and increasing ease of transport and installation resulting in up to 15.5% CoE reduction. These are game changing improvements that can play an important role in driving the development of next generation of larger turbines and accelerate the transition to greater use of renewables worldwide.

TRIBLADE project is expected to significantly enhance WF&MC’s profitability, with expected accumulated revenue of €85M and profits of €40M, 6 years after commercialization. Moreover, the successful achievement of TRIBLADE objectives is expected to assist Europe in achieving objectives to secure a sustainable energy system based on a low-carbon electricity from wind. This project will therefore entail increased competitiveness for the SME value chain and for the EU as a whole.

Convocatoria de propuestas

H2020-SMEInst-2016-2017

Consulte otros proyectos de esta convocatoria

Convocatoria de subcontratación

H2020-SMEINST-2-2016-2017

Régimen de financiación

SME-2 - SME instrument phase 2

Coordinador

WINFOOR AB
Aportación neta de la UEn
€ 1 577 393,65
Dirección
ALDERMANSGATAN 2
227 64 LUND
Suecia

Ver en el mapa

Pyme

Organización definida por ella misma como pequeña y mediana empresa (pyme) en el momento de la firma del acuerdo de subvención.

Región
Södra Sverige Sydsverige Skåne län
Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Enlaces
Coste total
€ 2 253 419,50

Participantes (1)