Metallurgical patented Process Transforming Residues from the Electronic Industry into Valuable Precious Metals

Información del proyecto

METALLICA

Identificador del acuerdo de subvención: 781060

DOI

10.3030/781060

Proyecto cerrado

Fecha de la firma de la CE 14 Julio 2017

Fecha de inicio 1 Agosto 2017

Fecha de finalización 30 Noviembre 2017

Financiado con arreglo a

• SOCIETAL CHALLENGES - Climate action, Environment, Resource Efficiency and Raw Materials

Coste total

€ 71 429,00

Aportación de la UE

€ 50 000,00

Coordinado por

URBANGOLD GMBH
Austria

Periodic Reporting for period 1 - METALLICA (Metallurgical patented Process Transforming Residues from the Electronic Industry into Valuable Precious Metals)

Período documentado: 2017-08-01 hasta 2017-11-30

Resumen del contexto y de los objetivos generales del proyecto

Waste Electrical and Electronic Equipment (WEEE) is a complex mixture of materials and components and if not properly managed, can cause environmental and health issues. WEEE is one the fastest growing waste streams in the EU, expected to grow to more than 12 million tons by 2020. To improve the environmental management of WEEE, to contribute to a circular economy, and to enhance resource efficiency we designed METALLICA, an innovative metallurgical process capable of extracting base and precious metals, and critical raw materials from WEEE. Our main goals for the development and commercialization of METALLICA are: assess the market of WEEE, evaluate the technical specifications parameters, identify any innovation legally protected that may risk our project, identify potential customers within metallurgy industry, investors and municipalities, analyse the regulations and design a strong business plan.

Trabajo realizado desde el comienzo del proyecto hasta el final del período abarcado por el informe y los principales resultados hasta la fecha

We performed a technical feasibility to evaluate process parameters, exemplary lay-out of the plant and conduct a risk analysis. Obtaining an environmental impact assessment of the first recycling plant is crucial. For the commercial feasibility, an initial FTO analysis was performed to guarantee that METALLICA can be commercialised, we consider the licencing of our technology. We analysed the new targeted markets to evaluate their volume and the best penetration strategy and performed a risk assessment. Several potential customers have expressed their interest. We also value trade fairs as a business opportunity to establish commercial agreements. We executed a financial feasibility through an analysis and investment evaluation for the completion of the process, commercialization of the technology, and plant operation.

Avances que van más allá del estado de la técnica e impacto potencial esperado (incluida la repercusión socioeconómica y las implicaciones sociales más amplias del proyecto hasta la fecha)

Our ultimate objective is to offer a recycling technology with a groundbreaking role, leading to maximum recovery of valuable metals and regulated hazardous gas emissions at a reduced lead time, while minimising the volume of material landfilled. We will ensure that the METALLICA fulfils all technical, commercial, and financial requirements for a successful introduction in the EU market of our cost-effective and sustainable technology. By aiming at adequate treatment of all qualities of WEEE – including lowest qualities – METALLICA addresses a gap in the market and tackles worldwide challenges (efficient use of resources and raw materials). From this Feasibility Study we expect to develop several relationships with key players within the EU, as well as become technological reference in WEEE management and impact the circular economy of the region.

image-1.png