Deliverables Demonstrators, pilots, prototypes (9) Fabrication (metallic textures) - intermediate Metallic textured surfaces will be developed with chemical etching techniques. This is the intermediate version of the final Deliverable D1.2. Fabrication (polymeric interfaces) A thick (>300 nm) polymeric coating will be deposited on a flat metal surface with spray. After the deposition, a plasma nanotexturing step followed by a plasma deposition step of a hydrophobic coating will be performed to create the desired morphology on the condenser. Fabrication (composite interfaces) - final Hydrophobic polymer binder matrices will be filled with 2D thermally conductive materials such as graphene, MoS2 along with ultra-long carbon nanotubes. This is the final version of the intermediate Deliverable D1.3. Setup for distillation experiments intermediate - intermediate A setup will be developed by MPIP which will evaluate the membrane distillation efficiency and dynamics of all developed surfaces. This is the intermediate version of the final Deliverable D3.4. Setup for distillation experiments - final A setup will be developed by MPIP which will evaluate the membrane distillation efficiency and dynamics of all developed surfacesThis is the final version of the final Deliverable D33 Fabrication (composite interfaces) - intermediate Hydrophobic polymer binder matrices will be filled with 2D thermally conductive materials such as graphene, MoS2 along with ultra-long carbon nanotubes. This is the intermediate version of the final Deliverable D1.2. Heat transfer and robustness The best candidate heat transfer materials will be screened via performing durability and aging tests Fabrication (metallic textures) - final Metallic textured surfaces will be developed with chemical etching techniques. This is the final version of the interim Deliverable D1.1 Fabrication (chemical coating) A superhydrophobic chemical coating will be applied in the internal part of capillaries by flow-through methods. Solution processed particle suspensions and MOF dispersions will be employed for this flow-through coating approach. Other (2) Review 1: Meeting Documents Documents for Reviewers Validated framework for DWC A modelling framework previously used for studying wetting transitions without phase-change will be suitably modified. The shape of the droplet during DWC and the pertinent heat flux to the solid substrate will be calculated. Documents, reports (1) 7 high impact factor papers 7 high impact factor papers concerning the different topics of the project will be published Websites, patent fillings, videos etc. (3) Workshop organization For the scientific community the dissemination will include the organization of at least one and preferably two workshops in international conferences related to the project activities Patent applications Before dissemination of the project results those of commercial merit will be protected This will be done through patents filed by partners in their country and to EPO with priority from their country filing within the life of this project At least one but most probably several patents are targeted Web page and logo established The web page and the logo will be established. Publications Peer reviewed articles (19) Ultrathin Durable Organic Hydrophobic Coatings Enhancing Dropwise Condensation Heat Transfer Author(s): Ultrathin Durable Organic Hydrophobic Coatings Enhancing Dropwise Condensation Heat Transfer Published in: Langmuir, 2022, ISSN 0743-7463 Publisher: American Chemical Society DOI: 10.1021/acs.langmuir.2c01477 Sprayable Thin and Robust Carbon Nanofiber Composite Coating for Extreme Jumping Dropwise Condensation Performance Author(s): Matteo Donati, Cheuk Wing Edmond Lam, Athanasios Milionis, Chander Shekhar Sharma, Abinash Tripathy, Armend Zendeli, Dimos Poulikakos Published in: Advanced Materials Interfaces, 2020, Page(s) 2001176, ISSN 2196-7350 Publisher: Wiley‐VCH GmbH DOI: 10.1002/admi.202001176 Tailoring Wetting Properties at Extremes States to Obtain Antifogging Functionality Author(s): Maria Tzianou, Giannis Thomopoulos, Nikolaos Vourdas, Kosmas Ellinas, Evangelos Gogolides Published in: Advanced Functional Materials, 2020, Page(s) 2006687, ISSN 1616-301X Publisher: John Wiley & Sons Ltd. DOI: 10.1002/adfm.202006687 Measuring the complexity of micro and nanostructured surfaces Author(s): A.Arapis, V.Constantoudis, D.Kontziampasisc, A.Milionis, C.W.E.Lam, A.Tripathy, D.Poulikakos, E.Gogolides Published in: Materials today: proceedings, 2021, ISSN 2214-7853 Publisher: Elsevier DOI: 10.1016/j.matpr.2021.10.120 Flexible Hematite (α-Fe2O3)-Graphene Nanoplatelet (GnP) Hybrids with High Thermal Conductivity Author(s): Amirreza Shayganpour, Marialaura Clausi, and Ilker S. Bayer Published in: Appl. Phys. Lett. 118, Issue Vol.118, Issue 9, 2021, ISSN 0003-6951 Publisher: American Institute of Physics DOI: 10.1063/5.0042404 A symmetry-based approach to the characterization of complex surface morphologies: Application in CuO and NiO nanostructures Author(s): V. Constantoudis, I. Ioannou-Sougleridis, A. Dimou, A. Ninou, M. Chatzichristidi, E. Makarona Published in: Micro and Nano Engineering, Issue Voume 16, 2022, ISSN 2590-0072 Publisher: Elsevier DOI: 10.1016/j.mne.2022.100148 Ultrathin Lubricant-Infused Vertical Graphene Nanoscaffolds for High-Performance Dropwise Condensation Author(s): Abinash Tripathy, Cheuk Wing Edmond Lam, Diana Davila, Matteo Donati, Athanasios Milionis, Chander Shekhar Sharma, Dimos Poulikakos Published in: ACS Nano, 2021, ISSN 1936-0851 Publisher: American Chemical Society DOI: 10.1021/acsnano.1c02932 The role of shadowed droplets in condensation heat transfer Author(s): George Memos, George Kokkoris, Vassilios Constantoudis, Cheuk Wing Edmond Lam, Abinash Tripathy, Efstratios Mitridis, Athanasios Milionis, Dimos Poulikakos, Evangelos Gogolides Published in: International Journal of Heat and Mass Transfer, Issue Volume 197, 2022, 123297,, 2022, ISSN 0017-9310 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.ijheatmasstransfer.2022.123297 Transparent and Robust Amphiphobic Surfaces Exploiting Nanohierarchical Surface-grown Metal–Organic Frameworks Author(s): Vikramjeet Singh, Xuehu Men, and Manish K. Tiwari Published in: Nano Letters, 2021, ISSN 1530-6984 Publisher: American Chemical Society DOI: 10.1021/acs.nanolett.1c00157 Motion of Drops with Different Viscosities on Micro‐Nanotextured Surfaces of Varying Topography and Wetting Properties Author(s): Panagiotis Sarkiris, Kosmas Ellinas, Dimitris Gkiolas, Dimitrios Mathioulakis, Evangelos Gogolides Published in: Advanced Functional Materials, 2019, Page(s) 1902905, ISSN 1616-301X Publisher: John Wiley & Sons Ltd. DOI: 10.1002/adfm.201902905 Self-Sustained Cascading Coalescence in Surface Condensation Author(s): Chander Shekhar Sharma, Cheuk Wing Edmond Lam, Athanasios Milionis, Hadi Eghlidi, Dimos Poulikakos Published in: ACS Applied Materials & Interfaces, Issue 11/30, 2019, Page(s) 27435-27442, ISSN 1944-8244 Publisher: American Chemical Society DOI: 10.1021/acsami.9b07673 Superhydrophobic hemostatic nanofiber composites for fast clotting and minimal adhesion Author(s): Zhe Li, Athanasios Milionis, Yu Zheng, Marcus Yee, Lukas Codispoti, Freddie Tan, Dimos Poulikakos, Choon Hwai Yap Published in: Nature Communications, Issue 10/1, 2019, ISSN 2041-1723 Publisher: Nature Publishing Group DOI: 10.1038/s41467-019-13512-8 Thermally conductive PVDF-graphene nanoplatelet (GnP) coatings Author(s): Marialaura Clausi, Silvia Grasselli, Annalisa Malchiodi, Ilker S. Bayer Published in: Applied Surface Science, Issue 529, 2020, Page(s) 147070, ISSN 0169-4332 Publisher: Elsevier BV DOI: 10.1016/j.apsusc.2020.147070 Water-based Scalable Methods for Self-Cleaning Antibacterial ZnO-Nanostructured Surfaces Author(s): Athanasios Milionis, Abinash Tripathy, Matteo Donati, Chander Shekhar Sharma, Fei Pan, Katharina Maniura-Weber, Qun Ren, Dimos Poulikakos Published in: Industrial & Engineering Chemistry Research, 2020, ISSN 0888-5885 Publisher: American Chemical Society DOI: 10.1021/acs.iecr.0c01998 Droplet Self-Propulsion on Superhydrophobic Microtracks Author(s): Christos Stamatopoulos, Athanasios Milionis, Norbert Ackerl, Matteo Donati, Paul Leudet de la Vallée, Philipp Rudolf von Rohr, Dimos Poulikakos Published in: ACS Nano, 2020, ISSN 1936-0851 Publisher: American Chemical Society DOI: 10.1021/acsnano.0c03849 Polyimide foam composites with nano-boron nitride (BN) and silicon carbide (SiC) for latent heat storage Author(s): Marialaura Clausi, Muhammad Zahid, Amirreza Shayganpour, Ilker S. Bayer Published in: Advanced Composites and Hybrid Materials, 2022, ISSN 2522-0128 Publisher: Springer DOI: 10.1007/s42114-022-00426-1 In‐situ graphene alignment in self‐sealing stretchable films for efficient thermal interface materials Author(s): Marialaura Clausi, Ilker S. Bayer Published in: Nano Select, 2020, ISSN 2688-4011 Publisher: Wiley DOI: 10.1002/nano.202000152 How Different Are Fog Collection and Dew Water Harvesting on Surfaces with Different Wetting Behaviors? Author(s): Dimitrios Nioras, Kosmas Ellinas, Vassilios Constantoudis, Evangelos Gogolides Published in: ACS Applied Materials & Interfaces, 2021, ISSN 1944-8244 Publisher: American Chemical Society DOI: 10.1021/acsami.1c16609 Enhanced Condensation on Soft Materials through Bulk Lubricant Infusion Author(s): Chander Shekhar Sharma,Athanasios Milionis,Abhinav Naga,Cheuk Wing Edmond Lam,Gabriel Rodriguez,Marco Francesco Del Ponte,Valentina Negri,Hopf Raoul,Maria D'Acunzi,Hans-Jürgen Butt,Doris Vollmer,Dimos Poulikakos Published in: Advanced Functional Materials, 2021, ISSN 1616-3028 Publisher: Willey DOI: 10.1002/adfm.202109633 Searching for OpenAIRE data... There was an error trying to search data from OpenAIRE No results available