NeuroRobotics Platform Application to Traction Control for Automotive Industry

Informazioni relative al progetto

NeuroMotive

ID dell’accordo di sovvenzione: 801426

DOI

10.3030/801426

Progetto chiuso

Data della firma CE 3 Aprile 2018

Data di avvio 1 Luglio 2018

Data di completamento 31 Dicembre 2019

Finanziato da

• EXCELLENT SCIENCE - Future and Emerging Technologies (FET)

Costo totale

€ 100 000,00

Contributo UE

€ 100 000,00

Coordinato da

TECHNISCHE UNIVERSITAET MUENCHEN
Germany

Periodic Reporting for period 1 - NeuroMotive (NeuroRobotics Platform Application to Traction Control for Automotive Industry)

Periodo di rendicontazione: 2018-07-01 al 2019-12-31

Sintesi del contesto e degli obiettivi generali del progetto

NeuroMotive aims at the development of a service in Traction Control for the automotive industry, offering innovative, practical and effective solutions, building upon the capacity of the Human Brain Project NeuroRobotics Platform (NRP) to synthesize sophisticated neural control laws. The combined use of the Siemens Mobility Testbed installed at the Technical University of Munich (TUM) and the AI Platform from HBP, also developed under the leadership of TUM allows automated learning of High-Fidelity Dynamical Car Models, high performance Traction Controllers, and safe testing of DDT Controllers for driving automation.

NeuroMotive provides a tailor-made service for automotive that exploits the synergy between the repeatable testing conditions afforded by the Hardware in the Loop infrastructure and cutting-edge AI Tools for Machine Learning to support the automated development of high-performance Traction Controllers, and of Dynamical Models for precise emulation of the car’s road behaviour (Numerical Twin for DDT).

The NeuroMotive project strives to achieve these aims by combining the strengths of two powerful tools:

a) The above mentioned Siemens Mobility Test bed (SMTS) which – as an automotive Hardware in the Loop Infrastructure - provides a controlled environment supporting precise, repeatable testing conditions, and automation of data-set generation for Deep-Learning. This test bed is unique in Germany (just one comparable infrastructure exists in industry at Valeo) because each of the four wheels can be addressed and controlled independently. A RODING car is used a demonstrator on top of this testbed to demonstrate the impact of signals set for instance by neural networks on the motion of a car under natural road conditions. The hardware in the Loop automotive setup allows for control-function tuning, validation and performance assessment. The integration of the considered vehicle within the testing setup allows physical emulation of a wide range of road conditions for any car connected.

b) The cutting-edge AI platform, NeuroRobotics Platform (NRP), developed in the HBP FET-Flagship project which supports AI Libraries (e.g. TensorFlow, NNabla), Neural Engines (NEST, Nengo), Virtual Twin functions, a robust suite of model ID and control tools. These tools for AI and Machine Learning allow neural controller development and tuning, Model Identification / Virtual Twin using the NeuroRobotics Platform Tool Suite. The platform directly supports controller synthesis, and machine/deep learning: tuning, adaptation of model parameters and control gains.

Concrete services to the automotive industry and suppliers were identified during the runtime of the project with intensive exchange with relevant stakeholders on the market based on the existing network of the partners.

Lavoro eseguito dall’inizio del progetto fino alla fine del periodo coperto dalla relazione e principali risultati finora ottenuti

The activities within the NeuroMotive were heavily focused on developing, validating and demonstrating the industrial relevance of some functionalities of the Neurorobotics Platform to industry, in this case the automotive industry. The project successfully defined these services, the stakeholder groups for which these services are relevant (by generating customer profiles. Contact with relevant stakeholders were expanded, a business model was developed and a price tag was put on the services, compared with the overall size of the market. The services developed are centered around three areas of expertise, which is quite unique in this combination:

• The SMTS hardware platform itself: with its almost unique feature of being able to drive each wheel independently. This platform is suited to testing relatively small cars due to the power limitations of the motors.
• The NRP software: which can enhance the hardware offering by allowing extended testing in scenarios that have not been physically encountered and recorded in on-road testing with hardware in the loop simulation testing. In the longer term, the NRP software could be used to develop and tune controllers for cars to
provide enhanced driver assistance and semi-autonomous and autonomous driving.
• The expertise built up within TUM that can be utilised to provide both SMTS related services but also specialised R&D projects based around developing further the capabilities of SMTS enhanced with NRP based software.

Quite a lot of effort has gone into setting up the Siemens testbed at TUM. Obstacles which had to be overcome and could not be foreseen included major adjustments of the building to accommodate the test bed, i.e.:

1. fortification of the concrete floor of the lab (including bottom & material sampling),
2. purchase of a lifter to lift the test cars to the flanges of the test bed,
3. solid wall with a bullet-proof window to protect researchers/users from injury from components flying away due to gravity, together with an industrial door to allow cars to access the robotics lab.

Challenges were posed not only by the implementation itself but also by the need to identify the right suppliers and by full applicability of the tender regulations for each individual task to be subcontracted. Apart from the physical setup, the electronic relaunch of the testbed has to be managed. This included the selection of the right software, the identification of potential suppliers and respecting the tender regulations when subcontracting the implementation.

The project successfully delivered the work related to concept determination. The practical demonstration was not feasible, though, due to the limitations in the function of the tools. These can be expected to be overcome shortly, but unfortunately, it was not possible to do so during the runtime of the project.

Progressi oltre lo stato dell’arte e potenziale impatto previsto (incluso l’impatto socioeconomico e le implicazioni sociali più ampie del progetto fino ad ora)

The progress beyond the state of the art generated by NeuroMotive has two directions: a) a technical dimension as the project generated insight which is highly relevant for further development of the Neurorobotics Platform in HBP, b) an economic dimension by developing concrete services for the automotive industry which industrial stakeholders are willing to pay for. A third dimension not necessarily intended at the beginning, is the relevance of the results for education.

While the long term impact of NeuroMotive remains much the same, particularly because the project confirmed the relevance of Reinforcement Learning, the robotics industry is considering with growing interest the technical challenge of the sim-to-real transfer. The shorter-term impact will be tempered by the spinning out of the less ambitious offerings of SMTS testing of small vehicles (capitalising on its near-unique features) coupled with a series of R&D projects aimed at achieving synergistic coupling of the NRP software with the SMTS platform. This will achieve two aims:

• First, building stronger links and alliances with key automotive players both as customers and collaborators;
• Second, it will enable the building of capability that will result in a truly unique offering that was first foreseen in the NeuroMotive project.

Last but not least the project revealed relevance for education and for further R&D projects, with industry, on a national German level, but also on the European level. Leveraging dedicated simulators like AirSim is therefore a particularly attractive option. At any rate, this topic must become an area of focused study for the development of the envisioned services.

neuromotive.jpg