Recycling and Repurposing of Plastic Waste for Advanced 3D Printing Applications

Project Information

Repair3D

Grant agreement ID: 814588

DOI 10.3030/814588

Project closed

EC signature date 12 December 2018

Start date 1 January 2019

End date 31 May 2023

Funded under

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced materials

Total cost € 5 998 832,50

EU contribution € 5 998 832,50

Coordinated by

WARRANT HUB SPA
Italy

Deliverables

Websites, patent fillings, videos etc. (5)

Project logo, leaflets and website
Report on Summer school and Training for Consumer Best Practices and Societal impact for circularity of materials use activities

The final version of deliverable will be submitted at M45 although the periodic progress of the work will be delivered through reports scheduled at M10 M19 that will be included in the periodic reports that will be submitted to the EC Therefore M1M18 periodic report will include the update scheduled at M10 The M19M36 periodic report will include the update scheduled at M19

Open-day exploitation and dissemination workshop

Openday exploitation and dissemination workshop

Communication Plan
End of project open-day exploitation and dissemination workshop

End of project openday exploitation and dissemination workshop

Documents, reports (1)

The potential of AM technologies for processing recycled materials

Publications

Peer reviewed articles (8)

Integrating Exposure Assessment and Process Hazard Analysis: The Nano-Enabled 3D Printing Filament Extrusion Case

Author(s): Stratos Saliakas, Spyridon Damilos, Melpo Karamitrou, Aikaterini-Flora Trompeta, Tatjana Kosanovic Milickovic, Costas Charitidis and Elias P. Koumoulos
Published in: Polymers, Issue 15(13), 2023, Page(s) 2836, ISSN 2073-4360
Publisher: MDPI
DOI: 10.3390/polym15132836

A systematic study of electrolyte effect on exfoliation efficiency and green synthesis of graphene oxide

Author(s): Georgios Konstantopoulos, Eleni Fotou, Afroditi Ntziouni, Konstantinos Kordatos, Costas A.Charitidis
Published in: Ceramics International, Issue 47 (22), 2021, Page(s) 32276-32289, ISSN 0272-8842
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.ceramint.2021.08.122

Inductive Thermal Effect on Thermoplastic Nanocomposites with Magnetic Nanoparticles for Induced-Healing, Bonding and Debonding On-Demand Applications

Author(s): Maria Kanidi, Niki Loura, Anna Frengkou,Tatjana Kosanovic Milickovic, Aikaterini-Flora Trompeta, Costas Charitidis
Published in: J. Compos. Sci., Issue 7(2), 2023, Page(s) 74, ISSN 2504-477X
Publisher: MDPI
DOI: 10.3390/jcs7020074

Leaching of Nano-Additives as a Method for Life-Cycle Suitability: A Study on 3D-Printed Nanocomposites for Wearables Applications

Author(s): Iakovos Gavalas, Despoina Ntenekou, Anna Karatza, Spyridon Damilos, Stratos Saliakas, Elias P. Koumoulos
Published in: Processes, Issue 11(7), 2023, Page(s) 2053, ISSN 2227-9717
Publisher: MDPI
DOI: 10.3390/pr11072053

Research and Development in Carbon Fibers and Advanced High-Performance Composites Supply Chain in Europe: A Roadmap for Challenges and the Industrial Uptake

Author(s): Elias P. Koumoulos, Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm, Guan Gong, Agustin Chiminelli, Ignaas Verpoest, Paul Kiekens, Costas A. Charitidis
Published in: Journal of Composites Science, Issue 3/3, 2019, Page(s) 86, ISSN 2504-477X
Publisher: MDPI
DOI: 10.3390/jcs3030086

Ready-to-Use Recycled Carbon Fibres Decorated with Magnetic Nanoparticles: Functionalization after Recycling Process Using Supercritical Fluid Chemistry

Author(s): Sophie Martin , Tatjana Kosanovic Milickovic , Costas A. Charitidis and Sandy Moisan
Published in: Journal of Composite Science, 2023, ISSN 2504-477X
Publisher: MDPI
DOI: 10.3390/jcs7060236

Effect of crosslinker to monomer ratio on the adhesion and size distribution of silver nanoparticles grown on poly (methacrylic acid) microspheres

Author(s): P. Kainourgios, P. Maroulas, C.A. Charitidis
Published in: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Issue 662, 2023, Page(s) 131002, ISSN 1873-4359
Publisher: Elsevier
DOI: 10.1016/j.colsurfa.2023.131002

Development of CNT-Based Nanocomposites with Ohmic Heating Capability towards Self-Healing Applications in Extrusion-Based 3D Printing Technologies

Author(s): Niki Loura, Eleni Gkartzou, Aikaterini-Flora Trompeta, Georgios Konstantopoulos, Panagiotis A. Klonos, Apostolos Kyritsis, Costas A. Charitidis
Published in: C, Issue 9(4), 2023, Page(s) 111, ISSN 2311-5629
Publisher: MDPI
DOI: 10.3390/c9040111

Conference proceedings (4)

3D printed CFRPs and micro-composite products by design from recycled resources

Author(s): T. Kosanovic Milickovic, W. Van De Steene, L. Cardon, C. Charitidis
Published in: 2019
Publisher: 9th EASN International Conference on Innovation in Aviation & Space

Composite materials circular economy: the case of 'green' fibres and nanoenhanced fibrous polymer composites

Author(s): A.F. Trompeta, T. Kosanovic-Milickovic, E.P. Koumoulos, C.A. Charitidis
Published in: 2019
Publisher: EuroNanoForum 2019

Novel Method For Unpolymerized Prepreg Recycling Using Supercritical CO2 Extraction.

Author(s): Sophie Martin, Henry-Pierre Guriec, Sandy Moisan
Published in: 2022
Publisher: ECCM
DOI: 10.5075/epfl-298799_978-2-9701614-0-0

Chain extension of recycled polyethylene terephthalate (PET) via reactive extrusion for additive manufacturing applications

Author(s): Theodoros Gikarakis, Christos Tsirogiannis, Christina Podara, Eleni Gkartzou, Aikaterini-Flora Trompeta and Costas Charitidis
Published in: Polymer Process Innovation Conference 2023, 2023
Publisher: University of Minho

Thesis and dissertations (1)

Development of nanocomposites with self-sensing and self-healing properties for use in Additive Manufacturing technologies

Author(s): Niki Loura
Published in: 2021
Publisher: NTUA
DOI: 10.26240/heal.ntua.21796