Livrables Websites, patent fillings, videos etc. (5) Project logo, leaflets and website Project logo, leaflets and website Report on Summer school and Training for Consumer Best Practices and Societal impact for circularity of materials use activities The final version of deliverable will be submitted at M45 although the periodic progress of the work will be delivered through reports scheduled at M10 M19 that will be included in the periodic reports that will be submitted to the EC Therefore M1M18 periodic report will include the update scheduled at M10 The M19M36 periodic report will include the update scheduled at M19 Open-day exploitation and dissemination workshop Openday exploitation and dissemination workshop Communication Plan Communication Plan End of project open-day exploitation and dissemination workshop End of project openday exploitation and dissemination workshop Documents, reports (1) The potential of AM technologies for processing recycled materials The potential of AM technologies for processing recycled materials Publications Peer reviewed articles (8) Integrating Exposure Assessment and Process Hazard Analysis: The Nano-Enabled 3D Printing Filament Extrusion Case Auteurs: Stratos Saliakas, Spyridon Damilos, Melpo Karamitrou, Aikaterini-Flora Trompeta, Tatjana Kosanovic Milickovic, Costas Charitidis and Elias P. Koumoulos Publié dans: Polymers, Issue 15(13), 2023, Page(s) 2836, ISSN 2073-4360 Éditeur: MDPI DOI: 10.3390/polym15132836 A systematic study of electrolyte effect on exfoliation efficiency and green synthesis of graphene oxide Auteurs: Georgios Konstantopoulos, Eleni Fotou, Afroditi Ntziouni, Konstantinos Kordatos, Costas A.Charitidis Publié dans: Ceramics International, Issue 47 (22), 2021, Page(s) 32276-32289, ISSN 0272-8842 Éditeur: Pergamon Press Ltd. DOI: 10.1016/j.ceramint.2021.08.122 Inductive Thermal Effect on Thermoplastic Nanocomposites with Magnetic Nanoparticles for Induced-Healing, Bonding and Debonding On-Demand Applications Auteurs: Maria Kanidi, Niki Loura, Anna Frengkou,Tatjana Kosanovic Milickovic, Aikaterini-Flora Trompeta, Costas Charitidis Publié dans: J. Compos. Sci., Issue 7(2), 2023, Page(s) 74, ISSN 2504-477X Éditeur: MDPI DOI: 10.3390/jcs7020074 Leaching of Nano-Additives as a Method for Life-Cycle Suitability: A Study on 3D-Printed Nanocomposites for Wearables Applications Auteurs: Iakovos Gavalas, Despoina Ntenekou, Anna Karatza, Spyridon Damilos, Stratos Saliakas, Elias P. Koumoulos Publié dans: Processes, Issue 11(7), 2023, Page(s) 2053, ISSN 2227-9717 Éditeur: MDPI DOI: 10.3390/pr11072053 Research and Development in Carbon Fibers and Advanced High-Performance Composites Supply Chain in Europe: A Roadmap for Challenges and the Industrial Uptake Auteurs: Elias P. Koumoulos, Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm, Guan Gong, Agustin Chiminelli, Ignaas Verpoest, Paul Kiekens, Costas A. Charitidis Publié dans: Journal of Composites Science, Issue 3/3, 2019, Page(s) 86, ISSN 2504-477X Éditeur: MDPI DOI: 10.3390/jcs3030086 Ready-to-Use Recycled Carbon Fibres Decorated with Magnetic Nanoparticles: Functionalization after Recycling Process Using Supercritical Fluid Chemistry Auteurs: Sophie Martin , Tatjana Kosanovic Milickovic , Costas A. Charitidis and Sandy Moisan Publié dans: Journal of Composite Science, 2023, ISSN 2504-477X Éditeur: MDPI DOI: 10.3390/jcs7060236 Effect of crosslinker to monomer ratio on the adhesion and size distribution of silver nanoparticles grown on poly (methacrylic acid) microspheres Auteurs: P. Kainourgios, P. Maroulas, C.A. Charitidis Publié dans: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Issue 662, 2023, Page(s) 131002, ISSN 1873-4359 Éditeur: Elsevier DOI: 10.1016/j.colsurfa.2023.131002 Development of CNT-Based Nanocomposites with Ohmic Heating Capability towards Self-Healing Applications in Extrusion-Based 3D Printing Technologies Auteurs: Niki Loura, Eleni Gkartzou, Aikaterini-Flora Trompeta, Georgios Konstantopoulos, Panagiotis A. Klonos, Apostolos Kyritsis, Costas A. Charitidis Publié dans: C, Issue 9(4), 2023, Page(s) 111, ISSN 2311-5629 Éditeur: MDPI DOI: 10.3390/c9040111 Conference proceedings (4) 3D printed CFRPs and micro-composite products by design from recycled resources Auteurs: T. Kosanovic Milickovic, W. Van De Steene, L. Cardon, C. Charitidis Publié dans: 2019 Éditeur: 9th EASN International Conference on Innovation in Aviation & Space Composite materials circular economy: the case of 'green' fibres and nanoenhanced fibrous polymer composites Auteurs: A.F. Trompeta, T. Kosanovic-Milickovic, E.P. Koumoulos, C.A. Charitidis Publié dans: 2019 Éditeur: EuroNanoForum 2019 Novel Method For Unpolymerized Prepreg Recycling Using Supercritical CO2 Extraction. Auteurs: Sophie Martin, Henry-Pierre Guriec, Sandy Moisan Publié dans: 2022 Éditeur: ECCM DOI: 10.5075/epfl-298799_978-2-9701614-0-0 Chain extension of recycled polyethylene terephthalate (PET) via reactive extrusion for additive manufacturing applications Auteurs: Theodoros Gikarakis, Christos Tsirogiannis, Christina Podara, Eleni Gkartzou, Aikaterini-Flora Trompeta and Costas Charitidis Publié dans: Polymer Process Innovation Conference 2023, 2023 Éditeur: University of Minho Thesis dissertations (1) Development of nanocomposites with self-sensing and self-healing properties for use in Additive Manufacturing technologies Auteurs: Niki Loura Publié dans: 2021 Éditeur: NTUA DOI: 10.26240/heal.ntua.21796 Recherche de données OpenAIRE... Une erreur s’est produite lors de la recherche de données OpenAIRE Aucun résultat disponible
