Recycling and Repurposing of Plastic Waste for Advanced 3D Printing Applications

Rezultaty

Project logo, leaflets and website
Report on Summer school and Training for Consumer Best Practices and Societal impact for circularity of materials use activities

The final version of deliverable will be submitted at M45 although the periodic progress of the work will be delivered through reports scheduled at M10 M19 that will be included in the periodic reports that will be submitted to the EC Therefore M1M18 periodic report will include the update scheduled at M10 The M19M36 periodic report will include the update scheduled at M19

Open-day exploitation and dissemination workshop

Openday exploitation and dissemination workshop

Communication Plan
End of project open-day exploitation and dissemination workshop

End of project openday exploitation and dissemination workshop

The potential of AM technologies for processing recycled materials

Publikacje

Integrating Exposure Assessment and Process Hazard Analysis: The Nano-Enabled 3D Printing Filament Extrusion Case

Autorzy: Stratos Saliakas, Spyridon Damilos, Melpo Karamitrou, Aikaterini-Flora Trompeta, Tatjana Kosanovic Milickovic, Costas Charitidis and Elias P. Koumoulos
Opublikowane w: Polymers, Numer 15(13), 2023, Strona(/y) 2836, ISSN 2073-4360
Wydawca: MDPI
DOI: 10.3390/polym15132836

A systematic study of electrolyte effect on exfoliation efficiency and green synthesis of graphene oxide

Autorzy: Georgios Konstantopoulos, Eleni Fotou, Afroditi Ntziouni, Konstantinos Kordatos, Costas A.Charitidis
Opublikowane w: Ceramics International, Numer 47 (22), 2021, Strona(/y) 32276-32289, ISSN 0272-8842
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.ceramint.2021.08.122

Inductive Thermal Effect on Thermoplastic Nanocomposites with Magnetic Nanoparticles for Induced-Healing, Bonding and Debonding On-Demand Applications

Autorzy: Maria Kanidi, Niki Loura, Anna Frengkou,Tatjana Kosanovic Milickovic, Aikaterini-Flora Trompeta, Costas Charitidis
Opublikowane w: J. Compos. Sci., Numer 7(2), 2023, Strona(/y) 74, ISSN 2504-477X
Wydawca: MDPI
DOI: 10.3390/jcs7020074

Leaching of Nano-Additives as a Method for Life-Cycle Suitability: A Study on 3D-Printed Nanocomposites for Wearables Applications

Autorzy: Iakovos Gavalas, Despoina Ntenekou, Anna Karatza, Spyridon Damilos, Stratos Saliakas, Elias P. Koumoulos
Opublikowane w: Processes, Numer 11(7), 2023, Strona(/y) 2053, ISSN 2227-9717
Wydawca: MDPI
DOI: 10.3390/pr11072053

Research and Development in Carbon Fibers and Advanced High-Performance Composites Supply Chain in Europe: A Roadmap for Challenges and the Industrial Uptake

Autorzy: Elias P. Koumoulos, Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm, Guan Gong, Agustin Chiminelli, Ignaas Verpoest, Paul Kiekens, Costas A. Charitidis
Opublikowane w: Journal of Composites Science, Numer 3/3, 2019, Strona(/y) 86, ISSN 2504-477X
Wydawca: MDPI
DOI: 10.3390/jcs3030086

Ready-to-Use Recycled Carbon Fibres Decorated with Magnetic Nanoparticles: Functionalization after Recycling Process Using Supercritical Fluid Chemistry

Autorzy: Sophie Martin , Tatjana Kosanovic Milickovic , Costas A. Charitidis and Sandy Moisan
Opublikowane w: Journal of Composite Science, 2023, ISSN 2504-477X
Wydawca: MDPI
DOI: 10.3390/jcs7060236

Effect of crosslinker to monomer ratio on the adhesion and size distribution of silver nanoparticles grown on poly (methacrylic acid) microspheres

Autorzy: P. Kainourgios, P. Maroulas, C.A. Charitidis
Opublikowane w: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Numer 662, 2023, Strona(/y) 131002, ISSN 1873-4359
Wydawca: Elsevier
DOI: 10.1016/j.colsurfa.2023.131002

Development of CNT-Based Nanocomposites with Ohmic Heating Capability towards Self-Healing Applications in Extrusion-Based 3D Printing Technologies

Autorzy: Niki Loura, Eleni Gkartzou, Aikaterini-Flora Trompeta, Georgios Konstantopoulos, Panagiotis A. Klonos, Apostolos Kyritsis, Costas A. Charitidis
Opublikowane w: C, Numer 9(4), 2023, Strona(/y) 111, ISSN 2311-5629
Wydawca: MDPI
DOI: 10.3390/c9040111

3D printed CFRPs and micro-composite products by design from recycled resources

Autorzy: T. Kosanovic Milickovic, W. Van De Steene, L. Cardon, C. Charitidis
Opublikowane w: 2019
Wydawca: 9th EASN International Conference on Innovation in Aviation & Space

Composite materials circular economy: the case of 'green' fibres and nanoenhanced fibrous polymer composites

Autorzy: A.F. Trompeta, T. Kosanovic-Milickovic, E.P. Koumoulos, C.A. Charitidis
Opublikowane w: 2019
Wydawca: EuroNanoForum 2019

Novel Method For Unpolymerized Prepreg Recycling Using Supercritical CO2 Extraction.

Autorzy: Sophie Martin, Henry-Pierre Guriec, Sandy Moisan
Opublikowane w: 2022
Wydawca: ECCM
DOI: 10.5075/epfl-298799_978-2-9701614-0-0

Chain extension of recycled polyethylene terephthalate (PET) via reactive extrusion for additive manufacturing applications

Autorzy: Theodoros Gikarakis, Christos Tsirogiannis, Christina Podara, Eleni Gkartzou, Aikaterini-Flora Trompeta and Costas Charitidis
Opublikowane w: Polymer Process Innovation Conference 2023, 2023
Wydawca: University of Minho

Development of nanocomposites with self-sensing and self-healing properties for use in Additive Manufacturing technologies

Autorzy: Niki Loura
Opublikowane w: 2021
Wydawca: NTUA
DOI: 10.26240/heal.ntua.21796

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz