Descrizione del progetto
Rimozione automatica e delicata dei getti di piante da frutto
La rimozione dei getti erbacei dalle piante da frutto in fase di crescita contribuisce a concentrare la linfa nelle parti in sviluppo per migliorare la qualità dei frutti. I metodi manuali, meccanici e chimici attualmente utilizzati comportano tuttavia diversi «effetti collaterali». La PMI spagnola Dabayma 2015 Sociedad Limitada ha sviluppato lo strumento Smart Shoot Remover, composto da due spazzole disposte frontalmente con un sistema guida e da una lama non tagliente che rimuove i getti delicatamente per trascinamento, senza danneggiare la pianta. Lo strumento permette di risparmiare tempo e denaro, riduce l’esigenza di utilizzare agenti chimici ed è più sicuro per le piante e le persone. Il progetto SSR, finanziato dall’UE, sta sostenendo la commercializzazione di questa innovazione rivoluzionaria, che ha già suscitato l’interesse di oltre 150 distributori.
Obiettivo
Removal of green shoots is a key step in vineyards and fruit trees, to control growth and improve production and quality of fruits. Shoots that grow on sides of the stems cause the plant to produce smaller fruits that may not ripen properly. By removing green shoots, plant produces better quality fruits (colour, size, ripening and weight) as sap concentrates flow in the growing areas. Current options to remove shoots are: (a) by hand: which force the worker to operate in a position that leads to injuries; (b) use of scissors: posing a high risk of spreading diseases/pests through sap with important drawbacks; (c) with a battery/fuel powered mechanical equipment: that implies high costs in terms of fuel consumption and equipment and can damage young stems; and (d) by chemicals application: that releases toxic products through herbicides. SSR (Smart Shoot Remover) is an innovative tool to quickly and completely remove green shoots from stems/trunks. It consists of two opposed interchangeable brushes, clamped around the stem/trunk and held via a guide system, which opens out the brushes in an adjustable angle, and a non-sharp blade, attached to one of the brushes guides, to remove the shoots by stripping, without damaging the plant. SSR allows to work 40% faster than manual techniques, saving 2.2 hours of workday vs. manual technique. It cost 98% less than mechanical equipment, requires only 1 operator against 2 of the mechanical/chemical removal and does not use fuel nor motorised equipment, reducing operational costs in >60€/h, and emissions. It reduces risk of spread of trunk diseases (ie. Esca complex), and improves of worker’s safety and ergonomics by preventing back injuries, falls/trips and cuts. We distributed 4.000 prototypes in 106 countries of the first version of SSR and received expressions of interest from >150 distributors. In 5 years from market launch, we foresee an increase in workforce of 30 employees and an accumumulatedaccumulated profit of 15,2M.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
- scienze agricoleagricoltura, silvicoltura e pescaagricolturaorticolturaviticoltura
- scienze agricoleagricoltura, silvicoltura e pescaagricolturaagronomiaprotezione delle piante
- scienze agricoleagricoltura, silvicoltura e pescaagricolturaorticolturafrutticoltura
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Argomento(i)
Invito a presentare proposte
(si apre in una nuova finestra) H2020-EIC-SMEInst-2018-2020
Vedi altri progetti per questo bandoBando secondario
H2020-SMEInst-2018-2020-1
Meccanismo di finanziamento
SME-1 - SME instrument phase 1Coordinatore
50540 BORJA ZARAGOZA
Spagna
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.