A novel shrouded vertical axis wind turbine for power generation in buildings

Projektinformationen

WindiBox

ID Finanzhilfevereinbarung: 817053

DOI 10.3030/817053

Abgeschlossenes Projekt

EK-Unterschriftsdatum 30 Mai 2018

Startdatum 1 Juni 2018

Enddatum 30 November 2018

Finanziert unter

• INDUSTRIAL LEADERSHIP - Innovation In SMEs

Gesamtkosten € 71 429,00

EU-Beitrag € 50 000,00

Koordiniert durch

INTROFOC LTD
Cyprus

Ziel

The reasoning which emerges the need for creating WindiBox is to effectively tackle the existence of limited wind turbine applicability for wind energy generation in buildings on a global scale. There is an obvious technological gap in the market, covering the exploitation of low speed air flows, especially in urban environments and areas where the dynamics of air are low and do not allow the installation of common wind turbines. According to the requirements imposed by the Energy Performance of Buildings Directive all new buildings must be nearly zero-energy by the end of 2020. All new public buildings must be nearly zero-energy by 2018.
The WindiBox device is comprised of a vertical axis wind turbine, enclosed inside a box-shaped, convergent-divergent casing (diffusers). This casing has been proven to augment the rotational speed of the wind turbine by a factor of at least 2.5 compared to a stand-alone turbine and additionally, enhancing its power output by at least 3 times. WindiBox size of 1m height – 2.5m width – 4m length offers power outputs ranging from 2700-3400kWh annually for wind speed 5m/s. The casing is also utilized to act as an environmental shield for minimal noise and vibration emissions since its extended surface area can be exploited for the addition of insulation. WindiBox overcomes the technological limitations of existing solutions in the market as well as the targeted milestones for CO2 emissions imposed by the European Union.
What differentiates WindiBox from the competition is that it offers an unparalleled cost-effective solution of ROI less than 4.5 years for 5m/s with exceptional performance characteristics, disrupting the existing market of renewables.
Our goal is to bring the WindiBox solution to market, after preparing an elaborate business plan. According to our initial plan, within 5 years from WindiBox commercialization, revenues will reach an annual total of approximately 19.2 million euros and net profits estimated at 30%.

Wissenschaftliches Gebiet

• social sciences › economics and business › business and management › business models
• engineering and technology › environmental engineering › energy and fuels › renewable energy › wind power
• natural sciences › biological sciences › ecology › ecosystems
• natural sciences › mathematics › pure mathematics › geometry
• engineering and technology › mechanical engineering › vehicle engineering › aerospace engineering › aeronautical engineering

Programm/Programme

• H2020-EU.2.3. - INDUSTRIAL LEADERSHIP - Innovation In SMEs Main Programme
• H2020-EU.3. - PRIORITY 'Societal challenges
• H2020-EU.2.1. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies

Thema/Themen

• EIC-SMEInst-2018-2020 - SME instrument

Aufforderung zur Vorschlagseinreichung

H2020-EIC-SMEInst-2018-2020

Andere Projekte für diesen Aufruf anzeigen

Unterauftrag

H2020-SMEInst-2018-2020-1

Finanzierungsplan

SME-1 - SME instrument phase 1

Koordinator

INTROFOC LTD

• Netto-EU-Beitrag: € 50 000,00
• Adresse: AGIAS ELENIS 6, AGIAS ELENIS BUILDING, 4TH FLOOR, ; 2060 NICOSIA ; Zypern
• KMU Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen). Ja:
  Region
  Κύπρος › Κύπρος › Κύπρος
• Region: Κύπρος › Κύπρος › Κύπρος
• Aktivitätstyp: Private for-profit entities (excluding Higher or Secondary Education Establishments)
• Gesamtkosten: € 71 429,00