Transformation of kraft lignin into a biodegradable biopolymer

Projektinformationen

Ligninpolymers

ID Finanzhilfevereinbarung: 817221

DOI

10.3030/817221

Projekt abgeschlossen

EK-Unterschriftsdatum 15 Mai 2018

Startdatum 1 Juni 2018

Enddatum 30 November 2018

Finanziert unter

• INDUSTRIAL LEADERSHIP - Innovation In SMEs

Gesamtkosten

€ 71 429,00

EU-Beitrag

€ 50 000,00

Koordiniert durch

REN FUEL K2B AB
Sweden

Periodic Reporting for period 1 - Ligninpolymers (Transformation of kraft lignin into a biodegradable biopolymer)

Berichtszeitraum: 2018-06-01 bis 2018-11-30

Zusammenfassung vom Kontext und den Gesamtzielen des Projekts

Problems addressed:

There are 2 main problems today when using fossil based plastics:
1. The fossil-based plastics comes from a non-renewable source generating carbon dioxide when decomposed which affects the global warming.
2. The fossil-based plastics are non-degradable in the nature causing enviromental problems such as microplastics.

Society:

Global warming and plastic polution in our oceans and nature is of high concern to many people on Earth.
Our technology provides a solution to that by transforming lignin, a bi-products from the forest industry to become a thermoplastic polymer that can replace many bulk plastics.

The objectives in this SME phase 1 study has been to:

1. Perform a market research exercise
2. Produce the biopolymer, Renol, in 10-100 kg-scale
3. Preparation of demonstrators

Arbeit, die ab Beginn des Projekts bis zum Ende des durch den Bericht erfassten Berichtszeitraums geleistet wurde, und die wichtigsten bis dahin erzielten Ergebnisse

The work that has been performed has been focused on the three objectives;

1. Perform a market research exercise
2. Produce the biopolymer, Renol, in 10-100 kg-scale
3. Preparation of demonstrators

Based on the results from those tasks we have delivered:

1. A market analysis
2. A Go-to-market strategy
3. A long- and short-term market strategy
4. A defined and verified the process in 10-100 kg scale.
5. Demonstrators for customers
6. A comparison of Renol and other bioplastics to bring out the unique selling points of our polymer


We have also during the SME phase 1 intensified and started new strategy partnerships with companies both upstream and downstream.

Fortschritte, die über den aktuellen Stand der Technik hinausgehen und voraussichtliche potenzielle Auswirkungen (einschließlich der bis dato erzielten sozioökonomischen Auswirkungen und weiter gefassten gesellschaftlichen Auswirkungen des Projekts)

Raw material

Lignin, which is one of the largest bi-products in the world in terms of volumes, can with our technology have a large effect when reducing greenhouse gases and microplastics in our oceans since it is bio sourced and biodegradable.

99% of all the processed lignin is today burnt in a recovery boiler for energy.
With our technology we enable the use of lignin in large application areas, the plastic industry.
With our technology we can increase the value of lignin by more than 10 times, and at the same time remove fossil-based plastics that contribute to greenhouse gases and microplastics.

Value chain and product life cycle