Robust and Efficient processes and technologies for Drop In renewable FUELs for road transport

Risultati finali

Report on the results of the validation test runs in REDIFUEL pilot

Report on gasification and FTproduction test runs in the pilot units of VTT This deliverable is part of Task 43

Comparison of BtL drop-in biof with transport fuels

Environmental and socioeconomic analysis of the biofuels on a life cycle basis Part of Task 56

Report on the energetical conversion efficiency of BtL drop-in biofuel

WelltoWheel analysis of the overall energy efficiency of the proposed dropin biofuels and process based inventory list of the subsequent environmental analysis of T55 This deliverable is part of Task 53

Report on infrastructural adaptations for renewable fuels

Based on the input of the subtasks of Task 32 an assessment is being performed for distributing companies end users and local authorities to identify infrastructure which needs to be adapted for REDIFUEL The outcome will be a clear reportbrochureleaflet explaining the characteristics advantages dos and donts in order to inform potential users This deliverable is part of Task 31

Formulation and synthesis route for a solid, cobalt-based microparticulate Fischer-Tropsch catalyst

Report describing in detail the chemical formulation and the synthesis route to prepare a cobaltbased catalyst identified as optimal for the olefinselective FischerTropsch process step alongside a set of preferred operation conditions temperature pressure gasspace velocity The report includes reaction results obtained in labscale tests This deliverable is part of Task 21

Report on emission and efficiency impact on existing engines

Results of testing the engine in its unchanged condition using the possible new fuel mixtures to show which potential the fuel alone can offer and which fuel mixture is most beneficial to state of the art engines This deliverable is part of Task 34

Report on integration of high pressure chamber investigations into CFD code

The report incorporates the findings of the experimental investigations into a validated 3DCFD model that is subsequently used for the optimization of the combustion system This deliverable is part of Task 33

Report on vehicle and fleet simulation of efficiency and emission impact in future engines

Simulation of heavy duty fleets and their road profile encooporating the results from the engine bench and vehicle tests to predict the emission impact on different vehicles and load cycles coming from the new fuel This deliverable is part of Task 35

Dissemination Plan

The document will contain the dissemination and communication measures, activities performed and tools following the European Commission Guide on how to communicate EU research and Innovation. This deliverable is part of Task 5.1.

Report on emission impact on existing vehicles and the fleet under real driving conditions

Results of emission testing with the truck with baseline engine setup and calibration just using the new fuel to illustrate the impact of the new fuel on existing fleets This deliverable is part of Task 35

Initial and Final Lubricant interaction report

Related mainly to task 323 where different fuels fuel blends and lubricants are contaminated with each other with various concentrations in order to monitor the impacts on the chemicalphysical properties of the fuel or lubricant This deliverable is part of Task 31

Data Management Plan

Structure and interface like share point server to handle data test data fuel production and analytics data within the project This deliverable is part of Task 52

Pubblicazioni

Co-production of paraffin fuels and olefin chemicals by CO hydrogenation: integrated porosity and promotion catalyst design

Autori: Kai Jeske, Iván López-Luque, Gonzalo Prieto
Pubblicato in: 4th SECAT Young Researchers Meeting, Numero 21/09/2020, 2020
Editore: N/a

Toward the co-production of fuels and chemicals: integrated porosity and promotion on a Cobalt Fischer-Tropsch (FT) catalyst

Autori: Kai Jeske, Iván López-Luque, Gonzalo Prieto
Pubblicato in: 7th ENMIX Young Researchers Meeting, Numero 08/10/2020, 2020
Editore: European Nanoporous Materials Institute of Excellence (ENMIX)

Fuel Science - From production to propulsion

Autori: C. Kosuru, S. Eiden, H. Hoffmann, K. Lucka
Pubblicato in: 2020
Editore: FSC Aachen

Promoted cobalt-based catalysts on meso-macroporous γ-Al2O₃ for olefin-selective Fischer-Tropsch synthesis

Autori: Kai Jeske, Gonzalo Prieto
Pubblicato in: EuropaCat 2019, Numero 18/08/2019, 2019
Editore: EuropaCat

Determination of aging products of future multi-component fuels

Autori: Nina Sittinger 1,a, Chandra Kanth Kosuru 2, Kaustav Roy 1, Sangeetha Ramaswamy 1 1 OWI Oel-Waerme-Institut gGmbH, Germany 2 Tec4Fuels GmbH, Germany
Pubblicato in: 2019
Editore: Combura 2019

FSC 2020 - Compatibility Studies of Alternative Fuels on Fuel System Components and Materials

Autori: C. Kosuru, S. Eiden, H. Hoffmann, K. Lucka
Pubblicato in: 2020
Editore: FSC 2020

REDIFUEL: Robust and Efficient processes and technologies for Drop-In renewable FUELs for road transport

Autori: Benedikt Heuser 1 Andreas Vorholt 2 Gonzalo Prieto 3 Barbara Graziano 1 Sascha Schönfeld 1 Maarten Messagie 4 Giuseppe Cardellini 4 Sanna Tuomi 5 Nina Sittinger 6 Roy Hermanns 6 Sangeetha Ramawamy 6 Chandra Kanth Kosuru 7 Hajo Hoffmann 7 Linus Schulz 8 Jaykumar Yadav 9 Maarten Weide 10 Thorsten Schnorbus 1
Pubblicato in: 2020
Editore: TRA

Direct conversion of syngas to higher alcohols via tandem integration of Fischer-Tropsch synthesis and olefin reductive hydroformylation

Autori: Biennial Meeting of the Spanish Catalysis Society (SECAT 2021)
Pubblicato in: 18/10/2021, 2021
Editore: Spanish Catalysis Society (SECAT)

Application of ex-ante LCA strategies to construct an LCI of REDIFUEL, a novel biofuel

Autori: Anne Van Den Oever, Daniele Mesquita Bordalo Da Costa, Maarten Messagie
Pubblicato in: Abstract book, SETAC EUROPE 31st Annual meeting, 2021
Editore: Society of Environmental Toxicology and Chemistry Europe (SETAC Europe)

Renewable drop-in fuels as an immediate measure to reduce CO2 emissions of heavy-duty applications

Autori: """Jaykumar Yadav1, Vikram Betgeri1, Barbara Graziano2, Avnish Dhongde2, Benedikt Heuser2, Markus Schönen2 and Nina Sittinger3, 1.RWTH Aachen University Aachen Deutschland, 2.FEV Europe GmbH Aachen Deutschland, 3.OWI Oel-Waerme-Institute gGmbH Herzogenrath Deutschland"""
Pubblicato in: Internationaler Motorenkongress 2020, 2020
Editore: Springer Vieweg, Wiesbaden
DOI: 10.1007/978-3-658-30500-0_24

Reductive hydroformylation with a selective and highly active rhodium amine system

Autori: Thorsten Rösler; Kira R. Ehmann; K. Köhnke; M. Leutzsch; N. Wessel; Andreas J. Vorholt; Walter Leitner; Walter Leitner
Pubblicato in: Journal of Catalysis, Numero 1, 2021, ISSN 0021-9517
Editore: Academic Press
DOI: 10.1016/j.jcat.2021.06.001

Green Process Design for Reductive Hydroformylation of Renewable Olefin Cuts for Drop-In Diesel Fuels

Autori: Sebastian Püschel, Sven Störtte, Johanna Topphoff, Dr. Andreas J. Vorholt, Walter Leitner
Pubblicato in: ChemSusChem, 2021, ISSN 1864-564X
Editore: Wiley-VCH GmbH
DOI: 10.1002/cssc.202100929

Auto-Tandem Catalytic Reductive Hydroformylation in a CO2-Switchable Solvent System

Autori: Sebastian Püschel, Jan Sadowski, Thorsten Rösler, Kira Ruth Ehmann, Andreas J. Vorholt, Walter Leitner
Pubblicato in: ACS Sustainable Chemistry & Engineering, Numero 2022, 10, 11, 2022, ISSN 2168-0485
Editore: American Chemical Society
DOI: 10.1021/acssuschemeng.2c00419

Auto-tandem catalytic reductive hydroformylation with continuous multiphase catalyst recycling

Autori: Sebastian Püschel; Enes Hammami; Kira R. Ehmann; Thorsten Rösler; Walter Leitner; Andreas J. Vorholt
Pubblicato in: Catalysis science & technology (2021). doi:10.1039/D1CY02000E, Numero Numero 3, 2022, 2022, ISSN 2044-4761
Editore: Royal Society of Chemistry
DOI: 10.1039/d1cy02000e

Design of Cobalt Fischer–Tropsch Catalysts for the Combined Production of Liquid Fuels and Olefin Chemicals from Hydrogen-Rich Syngas

Autori: Kai Jeske; Ali Can Kizilkaya; Iván López-Luque; Norbert Pfänder; Mathias Bartsch; Patricia Concepción; Gonzalo Prieto
Pubblicato in: ACS Catalysis, Numero 3, 2021, ISSN 2155-5435
Editore: American Chemical Society
DOI: 10.1021/acscatal.0c05027

Small- to medium-scale deep syngas purification: Biomass-to-liquids multi-contaminant removal demonstration

Autori: Christian Frilund, Sanna Tuomi, Esa Kurkela, Pekka Simell
Pubblicato in: Biomass and Bioenergy, Numero Volume 148, May 2021, 106031, 2021, ISSN 0961-9534
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.biombioe.2021.106031

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica