Resultado final
Pilot line setup complete at enduser facilities CORDA Applicationdriven pilot line demonstrated at CORDA in TRL7
Pilot line set-up complete at end-user facilities (AMIII)Pilot line setup complete at enduser facilities AMIII Applicationdriven pilot line demonstrated at AMIII in TRL7
Pilot line set-up complete at end-user facilities (GKN)Pilot line setup complete at enduser facilities GKN Applicationdriven pilot line demonstrated at GKN in TRL7
Pilot line set-up complete at end-user facilities (MX3D)Pilot line setup complete at enduser facilities MX3D Applicationdriven pilot line demonstrated at MX3D in TRL7
Pilot line set-up complete at end-user facilities (LOIRETCH)Pilot line setup complete at enduser facilities LOIRETECH Applicationdriven pilot line demonstrated at LOIRETECH in TRL7
Open-pilotsOpenpilots TRL 6 Networked open demonstrators integrating the INTEGRADDE datadriven pipeline developed to assist European industry ecosystem in the adoption of AM of metal components
Benchmarking of the INTEGRADDE deployment CORDA will be built and published to foster further developments in DED Based on CORDA pilot line results
Benchmarking of the Integradde deployment and adoption (MX3D)Benchmarking of the INTEGRADDE deployment MX3D will be built and published to foster further developments in DED Based on MX3D pilot line results
Benchmarking of the Integradde deployment and adoption (LOIRETECH)Benchmarking of the INTEGRADDE deployment LOIRETECH will be built and published to foster further developments in DED Based on LOIRETECH pilot line results
Catalogue of 3D target components manufacturedBenchmarking of the Integradde deployment and adoption (GKN)
Benchmarking of the INTEGRADDE deployment GKN will be built and published to foster further developments in DED Based on GKN pilot line results
Benchmarking of the Integradde deployment and adoption (AMIII)Benchmarking of the INTEGRADDE deployment AMIII will be built and published to foster further developments in DED Based on AMIII pilot line results
Training materials to be developed according to the training plan
Publicaciones
Autores:
Camilo Prieto; Roberto Fernandez; Carlos Gonzalez; Marcos Diez; Jorge Arias; Ryan Sommerhuber; Fabian Lücking
Publicado en:
2020
Editor:
Creative Commons Attribution 4.0 International
DOI:
10.5281/zenodo.4043548
Autores:
F.A. Huamán-Mamani, J.F. Gamarra-Delgado, Pradip Aryal, Kjell Hurtig, Fredrik Sikström, Håkan Nilsson, Isabelle Choquet
Publicado en:
Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, 2021, ISBN 978-1-927877-93-7
Editor:
Avestia Publishing
DOI:
10.11159/htff21.130
Autores:
Camilo Prieto; Carlos Gonzalez; Sara Carracelas; Baltasar Lodeiro
Publicado en:
International Congress on LASER World of PHOTONICS (WoP 2019), Edición 1, 2019
Editor:
International Congress on LASER World of PHOTONICS (WoP 2019)
DOI:
10.5281/zenodo.3674603
Autores:
Mihail Babcinschi; Bernardo Freire; Lucía Alonso Ferreira; Baltasar Lodeiro Señaris; Félix Vidal; Pedro Neto
Publicado en:
IEEE International Conference on Emerging Technologies and Factory Automation, Edición 1, 2019
Editor:
IEEE International Conference on Emerging Technologies and Factory Automation
DOI:
10.5281/zenodo.3673905
Autores:
Andreas K. Lianos; Sotiris Koutsoukos; Harry Bikas; Panagiotis Stavropoulos
Publicado en:
30th CIRP Design Conference 2020, 2020
Editor:
Elsevier
DOI:
10.5281/zenodo.4276911
Autores:
Papacharalampopoulos, Alexios; Stavropoulos, Panagiotis
Publicado en:
7th CIRP Global Web Conference “Towards shifted production value stream patterns through inference of data, models, and technology, Edición 1, 2019, Página(s) 110–115
Editor:
Elsevier E.V.
DOI:
10.5281/zenodo.4274270
Autores:
Bernardo Freire, Mihail Babcinschi, Lucía Ferreira, Baltasar Señaris, Felix Vidal, Pedro Neto
Publicado en:
Procedia Manufacturing, Edición 51, 2020, Página(s) 671-677, ISSN 2351-9789
Editor:
Elsevier
DOI:
10.1016/j.promfg.2020.10.094
Autores:
Andreas K. Lianos, Harry Bikas, Panagiotis Stavropoulos
Publicado en:
Designs, Edición 4/3, 2020, Página(s) 19, ISSN 2411-9660
Editor:
MDPI
DOI:
10.3390/designs4030019
Autores:
Mihail Babcinschi; Bernardo Freire; Lucía Ferreira; Baltasar Señaris; Felix Vidal; Paulo Vaz; Pedro Neto
Publicado en:
Procedia Manufacturing, Edición Volume 51, 2020, Página(s) 26-31, ISSN 2351-9789
Editor:
Elsevier
DOI:
10.1016/j.promfg.2020.10.005
Autores:
Weibo Liu, Zidong Wang, Lulu Tian, Stanislao Lauria, Xiaohui Liu
Publicado en:
Sciencedirect - Journal Computers & Electrical Engineering, Edición Volume 92, 2021, Página(s) 107183, ISSN 0045-7906
Editor:
Pergamon Press Ltd.
DOI:
10.1016/j.compeleceng.2021.107183
Autores:
Felicity S.H.B. Freeman, B Thomas, L Chechik, Iain Todd,
Publicado en:
Science Direct - Additive Manufacturing Letters, Edición Volume 2, 2022, Página(s) 100024, ISSN 2772-3690
Editor:
Elsevier B.V.
DOI:
10.1016/j.addlet.2021.100024
Autores:
J. Ye, P. Kyvelou, F. Gilardi, H. Lu, M. Gilbert and L. Gardner
Publicado en:
IEEE Access, Edición vol. 9, 2021, Página(s) 165476-165489, ISSN 2169-3536
Editor:
Institute of Electrical and Electronics Engineers Inc.
DOI:
10.1109/access.2021.3132797
Autores:
Hongjia Lu, Matthew Gilbert, Linwei He
Publicado en:
WCSMO13 Conference, Edición 1, 2019, Página(s) "p318 of ""Book of Abstracts"""
Editor:
ISSMO
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles