Rezultaty
Pilot line setup complete at enduser facilities CORDA Applicationdriven pilot line demonstrated at CORDA in TRL7
Pilot line set-up complete at end-user facilities (AMIII)Pilot line setup complete at enduser facilities AMIII Applicationdriven pilot line demonstrated at AMIII in TRL7
Pilot line set-up complete at end-user facilities (GKN)Pilot line setup complete at enduser facilities GKN Applicationdriven pilot line demonstrated at GKN in TRL7
Pilot line set-up complete at end-user facilities (MX3D)Pilot line setup complete at enduser facilities MX3D Applicationdriven pilot line demonstrated at MX3D in TRL7
Pilot line set-up complete at end-user facilities (LOIRETCH)Pilot line setup complete at enduser facilities LOIRETECH Applicationdriven pilot line demonstrated at LOIRETECH in TRL7
Open-pilotsOpenpilots TRL 6 Networked open demonstrators integrating the INTEGRADDE datadriven pipeline developed to assist European industry ecosystem in the adoption of AM of metal components
Benchmarking of the INTEGRADDE deployment CORDA will be built and published to foster further developments in DED Based on CORDA pilot line results
Benchmarking of the Integradde deployment and adoption (MX3D)Benchmarking of the INTEGRADDE deployment MX3D will be built and published to foster further developments in DED Based on MX3D pilot line results
Benchmarking of the Integradde deployment and adoption (LOIRETECH)Benchmarking of the INTEGRADDE deployment LOIRETECH will be built and published to foster further developments in DED Based on LOIRETECH pilot line results
Catalogue of 3D target components manufacturedBenchmarking of the Integradde deployment and adoption (GKN)
Benchmarking of the INTEGRADDE deployment GKN will be built and published to foster further developments in DED Based on GKN pilot line results
Benchmarking of the Integradde deployment and adoption (AMIII)Benchmarking of the INTEGRADDE deployment AMIII will be built and published to foster further developments in DED Based on AMIII pilot line results
Training materials to be developed according to the training plan
Publikacje
Autorzy:
Camilo Prieto; Roberto Fernandez; Carlos Gonzalez; Marcos Diez; Jorge Arias; Ryan Sommerhuber; Fabian Lücking
Opublikowane w:
2020
Wydawca:
Creative Commons Attribution 4.0 International
DOI:
10.5281/zenodo.4043548
Autorzy:
F.A. Huamán-Mamani, J.F. Gamarra-Delgado, Pradip Aryal, Kjell Hurtig, Fredrik Sikström, Håkan Nilsson, Isabelle Choquet
Opublikowane w:
Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, 2021, ISBN 978-1-927877-93-7
Wydawca:
Avestia Publishing
DOI:
10.11159/htff21.130
Autorzy:
Camilo Prieto; Carlos Gonzalez; Sara Carracelas; Baltasar Lodeiro
Opublikowane w:
International Congress on LASER World of PHOTONICS (WoP 2019), Numer 1, 2019
Wydawca:
International Congress on LASER World of PHOTONICS (WoP 2019)
DOI:
10.5281/zenodo.3674603
Autorzy:
Mihail Babcinschi; Bernardo Freire; Lucía Alonso Ferreira; Baltasar Lodeiro Señaris; Félix Vidal; Pedro Neto
Opublikowane w:
IEEE International Conference on Emerging Technologies and Factory Automation, Numer 1, 2019
Wydawca:
IEEE International Conference on Emerging Technologies and Factory Automation
DOI:
10.5281/zenodo.3673905
Autorzy:
Andreas K. Lianos; Sotiris Koutsoukos; Harry Bikas; Panagiotis Stavropoulos
Opublikowane w:
30th CIRP Design Conference 2020, 2020
Wydawca:
Elsevier
DOI:
10.5281/zenodo.4276911
Autorzy:
Papacharalampopoulos, Alexios; Stavropoulos, Panagiotis
Opublikowane w:
7th CIRP Global Web Conference “Towards shifted production value stream patterns through inference of data, models, and technology, Numer 1, 2019, Strona(/y) 110–115
Wydawca:
Elsevier E.V.
DOI:
10.5281/zenodo.4274270
Autorzy:
Bernardo Freire, Mihail Babcinschi, Lucía Ferreira, Baltasar Señaris, Felix Vidal, Pedro Neto
Opublikowane w:
Procedia Manufacturing, Numer 51, 2020, Strona(/y) 671-677, ISSN 2351-9789
Wydawca:
Elsevier
DOI:
10.1016/j.promfg.2020.10.094
Autorzy:
Andreas K. Lianos, Harry Bikas, Panagiotis Stavropoulos
Opublikowane w:
Designs, Numer 4/3, 2020, Strona(/y) 19, ISSN 2411-9660
Wydawca:
MDPI
DOI:
10.3390/designs4030019
Autorzy:
Mihail Babcinschi; Bernardo Freire; Lucía Ferreira; Baltasar Señaris; Felix Vidal; Paulo Vaz; Pedro Neto
Opublikowane w:
Procedia Manufacturing, Numer Volume 51, 2020, Strona(/y) 26-31, ISSN 2351-9789
Wydawca:
Elsevier
DOI:
10.1016/j.promfg.2020.10.005
Autorzy:
Weibo Liu, Zidong Wang, Lulu Tian, Stanislao Lauria, Xiaohui Liu
Opublikowane w:
Sciencedirect - Journal Computers & Electrical Engineering, Numer Volume 92, 2021, Strona(/y) 107183, ISSN 0045-7906
Wydawca:
Pergamon Press Ltd.
DOI:
10.1016/j.compeleceng.2021.107183
Autorzy:
Felicity S.H.B. Freeman, B Thomas, L Chechik, Iain Todd,
Opublikowane w:
Science Direct - Additive Manufacturing Letters, Numer Volume 2, 2022, Strona(/y) 100024, ISSN 2772-3690
Wydawca:
Elsevier B.V.
DOI:
10.1016/j.addlet.2021.100024
Autorzy:
J. Ye, P. Kyvelou, F. Gilardi, H. Lu, M. Gilbert and L. Gardner
Opublikowane w:
IEEE Access, Numer vol. 9, 2021, Strona(/y) 165476-165489, ISSN 2169-3536
Wydawca:
Institute of Electrical and Electronics Engineers Inc.
DOI:
10.1109/access.2021.3132797
Autorzy:
Hongjia Lu, Matthew Gilbert, Linwei He
Opublikowane w:
WCSMO13 Conference, Numer 1, 2019, Strona(/y) "p318 of ""Book of Abstracts"""
Wydawca:
ISSMO
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników