Intelligent data-driven pipeline for the manufacturing of certified metal parts through Direct Energy Deposition processes

Projektinformationen

INTEGRADDE

ID Finanzhilfevereinbarung: 820776

DOI

10.3030/820776

Projekt abgeschlossen

EK-Unterschriftsdatum 27 September 2018

Startdatum 1 Oktober 2018

Enddatum 31 März 2023

Finanziert unter

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Gesamtkosten

€ 16 999 328,75

EU-Beitrag

€ 12 716 173,51

Koordiniert durch

ASOCIACION DE INVESTIGACION METALURGICA DEL NOROESTE
Spain

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Demonstrators, pilots, prototypes (6)

Pilot line set-up complete at end-user facilities (CORDA)

Pilot line setup complete at enduser facilities CORDA Applicationdriven pilot line demonstrated at CORDA in TRL7

Pilot line set-up complete at end-user facilities (AMIII)

Pilot line setup complete at enduser facilities AMIII Applicationdriven pilot line demonstrated at AMIII in TRL7

Pilot line set-up complete at end-user facilities (GKN)

Pilot line setup complete at enduser facilities GKN Applicationdriven pilot line demonstrated at GKN in TRL7

Pilot line set-up complete at end-user facilities (MX3D)

Pilot line setup complete at enduser facilities MX3D Applicationdriven pilot line demonstrated at MX3D in TRL7

Pilot line set-up complete at end-user facilities (LOIRETCH)

Pilot line setup complete at enduser facilities LOIRETECH Applicationdriven pilot line demonstrated at LOIRETECH in TRL7

Open-pilots

Openpilots TRL 6 Networked open demonstrators integrating the INTEGRADDE datadriven pipeline developed to assist European industry ecosystem in the adoption of AM of metal components

Documents, reports (6)

Benchmarking of the Integradde deployment and adoption (CORDA)

Benchmarking of the INTEGRADDE deployment CORDA will be built and published to foster further developments in DED Based on CORDA pilot line results

Benchmarking of the Integradde deployment and adoption (MX3D)

Benchmarking of the INTEGRADDE deployment MX3D will be built and published to foster further developments in DED Based on MX3D pilot line results

Benchmarking of the Integradde deployment and adoption (LOIRETECH)

Benchmarking of the INTEGRADDE deployment LOIRETECH will be built and published to foster further developments in DED Based on LOIRETECH pilot line results

Catalogue of 3D target components manufactured
Benchmarking of the Integradde deployment and adoption (GKN)

Benchmarking of the INTEGRADDE deployment GKN will be built and published to foster further developments in DED Based on GKN pilot line results

Benchmarking of the Integradde deployment and adoption (AMIII)

Benchmarking of the INTEGRADDE deployment AMIII will be built and published to foster further developments in DED Based on AMIII pilot line results

Websites, patent fillings, videos etc. (1)

Online training materials

Training materials to be developed according to the training plan

Veröffentlichungen

Conference proceedings (6)

In situ process monitoring by optical microphone for crack detection in Laser Metal Deposition applications

Autoren: Camilo Prieto; Roberto Fernandez; Carlos Gonzalez; Marcos Diez; Jorge Arias; Ryan Sommerhuber; Fabian Lücking
Veröffentlicht in: 2020
Herausgeber: Creative Commons Attribution 4.0 International
DOI: 10.5281/zenodo.4043548

Effect of Substrate Orientation on Melt Pool during Multi-LayerDeposition in V-Groove with Gas Metal Arc

Autoren: F.A. Huamán-Mamani, J.F. Gamarra-Delgado, Pradip Aryal, Kjell Hurtig, Fredrik Sikström, Håkan Nilsson, Isabelle Choquet
Veröffentlicht in: Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, 2021, ISBN 978-1-927877-93-7
Herausgeber: Avestia Publishing
DOI: 10.11159/htff21.130

3D thermal mapping during AM by LMD towards better part quality

Autoren: Camilo Prieto; Carlos Gonzalez; Sara Carracelas; Baltasar Lodeiro
Veröffentlicht in: International Congress on LASER World of PHOTONICS (WoP 2019), Ausgabe 1, 2019
Herausgeber: International Congress on LASER World of PHOTONICS (WoP 2019)
DOI: 10.5281/zenodo.3674603

AutomationML for Data Exchange in the Robotic Process of Metal Additive Manufacturing

Autoren: Mihail Babcinschi; Bernardo Freire; Lucía Alonso Ferreira; Baltasar Lodeiro Señaris; Félix Vidal; Pedro Neto
Veröffentlicht in: IEEE International Conference on Emerging Technologies and Factory Automation, Ausgabe 1, 2019
Herausgeber: IEEE International Conference on Emerging Technologies and Factory Automation
DOI: 10.5281/zenodo.3673905

Manufacturability Assessment and Design for AM

Autoren: Andreas K. Lianos; Sotiris Koutsoukos; Harry Bikas; Panagiotis Stavropoulos
Veröffentlicht in: 30th CIRP Design Conference 2020, 2020
Herausgeber: Elsevier
DOI: 10.5281/zenodo.4276911

Towards a Digital Twin for Thermal Processes: Control-centric approach

Autoren: Papacharalampopoulos, Alexios; Stavropoulos, Panagiotis
Veröffentlicht in: 7th CIRP Global Web Conference “Towards shifted production value stream patterns through inference of data, models, and technology, Ausgabe 1, 2019, Seite(n) 110–115
Herausgeber: Elsevier E.V.
DOI: 10.5281/zenodo.4274270

Peer reviewed articles (6)

Direct Energy Deposition: a complete workflow for the additive manufacturing of complex shape parts

Autoren: Bernardo Freire, Mihail Babcinschi, Lucía Ferreira, Baltasar Señaris, Felix Vidal, Pedro Neto
Veröffentlicht in: Procedia Manufacturing, Ausgabe 51, 2020, Seite(n) 671-677, ISSN 2351-9789
Herausgeber: Elsevier
DOI: 10.1016/j.promfg.2020.10.094

A Shape Optimization Method for Part Design Derived from the Buildability Restrictions of the Directed Energy Deposition Additive Manufacturing Process

Autoren: Andreas K. Lianos, Harry Bikas, Panagiotis Stavropoulos
Veröffentlicht in: Designs, Ausgabe 4/3, 2020, Seite(n) 19, ISSN 2411-9660
Herausgeber: MDPI
DOI: 10.3390/designs4030019

An integrated and interoperable AutomationML-based platform for the robotic process of metal additive manufacturing

Autoren: Mihail Babcinschi; Bernardo Freire; Lucía Ferreira; Baltasar Señaris; Felix Vidal; Paulo Vaz; Pedro Neto
Veröffentlicht in: Procedia Manufacturing, Ausgabe Volume 51, 2020, Seite(n) 26-31, ISSN 2351-9789
Herausgeber: Elsevier
DOI: 10.1016/j.promfg.2020.10.005

Melt pool segmentation for additive manufacturing: A generative adversarial network approach

Autoren: Weibo Liu, Zidong Wang, Lulu Tian, Stanislao Lauria, Xiaohui Liu
Veröffentlicht in: Sciencedirect - Journal Computers & Electrical Engineering, Ausgabe Volume 92, 2021, Seite(n) 107183, ISSN 0045-7906
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.compeleceng.2021.107183

Multi-faceted monitoring of powder flow rate variability in directed energy deposition

Autoren: Felicity S.H.B. Freeman, B Thomas, L Chechik, Iain Todd,
Veröffentlicht in: Science Direct - Additive Manufacturing Letters, Ausgabe Volume 2, 2022, Seite(n) 100024, ISSN 2772-3690
Herausgeber: Elsevier B.V.
DOI: 10.1016/j.addlet.2021.100024

An End-to-End Framework for the Additive Manufacture of Optimized Tubular Structures

Autoren: J. Ye, P. Kyvelou, F. Gilardi, H. Lu, M. Gilbert and L. Gardner
Veröffentlicht in: IEEE Access, Ausgabe vol. 9, 2021, Seite(n) 165476-165489, ISSN 2169-3536
Herausgeber: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/access.2021.3132797

Other (1)

Interactive conceptual design optimization of additively manufactured components

Autoren: Hongjia Lu, Matthew Gilbert, Linwei He
Veröffentlicht in: WCSMO13 Conference, Ausgabe 1, 2019, Seite(n) "p318 of ""Book of Abstracts"""
Herausgeber: ISSMO