Resultado final
Detailed report on investigations to correctly generate the Freezing Rain clouds in wind tunnel based on existing techniques. Related task(s): Task 6.3.
ICE GENESIS - synthesis of results and way forwardPublic synthesis of all the outcomes of ICE GENESIS. It will thus cover App C, App O and snow conditions, WTT and numerical tools improvements. Related task(s): Task 2.3.
Report on the review, assessment and selection of instrumentation for PSDReview and selection of the best instrumentation to detect the PSD under appendix CO conditions in WT facilities Related tasks Task 41
Proposal of calibration instruments and procedures for FZDZDetailed report defining a calibration methodology installation requirements and the measurement procedures of the instruments for MVD, PSD, and bulk LWC for FZDZ in IWT. Related task(s): Task 6.1.
Report on the development and assessment of 3D-scanning systems and associated evaluation toolReport on selection and optimization of a 3D-scanning system for W/T facilities for experiments with different test specimen to characterize 3D ice shape, surface roughness, and ice density (combined with weighing device). Related task(s): Task 4.5.
Proposal of calibration instruments and procedures for FZRADetailed report defining a calibration methodology installation requirements and the measurement procedures of the instruments for MVD, PSD, and bulk LWC for FZRA in IWT. Related task(s): Task 6.1.
Definition of the target requirements for test facilities operating envelopes for snowDetailed report describing the icing conditions and A/C operating envelopes needeed to be investigated to support design validation and certification in snow conditions and defining the operating envelope of IWT, the characteristics of instrumentation to be used for measurements and the relevant parameters to be investigated in order to be able to define an experimental envelope being compliant with requirements. Related task(s): Task 3.2.
Public synthesis of liquid icing physics models and tools improvementsPublic final report on improved numerical capabilities with respect to SLD models and 3D ice accretion methodologies. Related task(s): Task 9.3 and 9.4.
Definition of the target requirements for test facilities operating envelopes for App ODetailed report describing the icing conditions and A/C operating envelopes needeed to be investigated to support design validation and certification in App. O conditions and defining the operating envelope of IWT, the characteristics of instrumentation to be used for measurements and the relevant parameters to be investigated in order to be able to define an experimental envelope being compliant with requirements. Related task(s): Task 3.1.
Definition of numerical capability requirements for snowDetailed report presenting an exhaustive literature review on the existing models, numerical techniques and experimental data that are currently available for the development of 3D numerical tools for snow. Then requirements will be defined in terms of basic tests to be performed in WP10, model features, model accuracy, numerical techniques to be used, interface with existing industrial tools, and validation procedure. Related task(s): Task 3.6.
Public synthesis of snow icing physics models and tools improvementsPublic final report on improved numerical capabilities with respect to snow icing physiscs (trajectory, impact and accretion). Related task(s): Task 10.3.
Synthesis & Characterization of snow microphysical propertiesReport providing validated methods for the retrieval of the microphysical properties of snow clouds at ground stations in wind tunnels for aircraft campaign data Description of the microphysical and dynamical characteristics of snow clouds Related tasks Task 55
Selection of most suitable instrumentation for F/TReview of available airborne instrumentation for snow microphysical properties characterization (bulk LWC/IWC/TWC, number and mass PSD, snow crystals' shapes) and according definition of ICE GENESIS snow flight tests aircraft payload. Related task(s): Task 5.1.
Report on the review and assessment of instrumentation/model for droplet temperature measurement and homogeneity characterizationReport on the selection of best suitable instrumentation for large test facility calibration definition of the requirements for instrumentation installation needs taking into account the specific constraints of large scale facilities and estimation of supercooling of droplets Related tasks Task 43 and 44
Report on the review, assessment and selection of instrumentation for LWCReview and selection of the best instrumentation to measure LWC under appendix CO conditions in WT facilities Related tasks Task 42
Calibration methodology for snow test facilityDetailed report of used calibration methodology and criteria for producible snow capacity and quality for Go/No-Go decision gate. It will also inlude guidance to standardisation working groups (EUROCAE, SAE). Related task(s): Task 7.4.
Report on the validation test main conclusions and best numerical practicesFinal report on the outcome of the validation exercise in terms of capability maturity as well as in terms of numerical best practices. Related task(s): Task 11.1, 11.2 and 11.3.
Definition of numerical capability requirements for liquid icing conditionsDetailed report presenting an exhaustive literature review on the existing models, numerical techniques and experimental data that are currently available for the development of 3D numerical tools for App C and O. Then requirements will be defined in terms of basic tests to be performed in WP9, model features, model accuracy, numerical techniques to be used, interface with existing industrial tools, and validation procedure. Related task(s): Task 3.5.
Assessment of improved FZDZ capabilities for each IWT involved in the projectReport on selection of the spray nozzles to use in wind tunnel for FZDZ generation. Report on the improvement of the capabilities of IWT in FZDZ and assessment of the performance of spray bar system to generate bi-modal distribution and low LWC. Related task(s): Task 6.2.
Selection of most suitable instrumentation for IWT/T calibrationReview of available instrumentation for bulk LWC/IWC/TWC, snow number PSD, wind tunnel homogeneity measurement and according selection of most suitable instrumentation for IWT calibration. Related task(s): Task 5.2.
The public website will be used as a communication tool. Project information will be made available for download including public deliverables, flyers, posters, etc. Announcements and information on events will also be provided. It will be updated regularly (task 2.1). Related task(s): Task 2.1.
Initial communication kit with information about project structure and objectives. The communication kit is expected to include a flyer / leaflet and a poster, as well as a presentation template (task 2.1). Related task(s): Task 2.1.
Publicaciones
Autores:
Anne-Claire Billault-Roux; Alexis Berne
Publicado en:
Atmospheric Measurement Techniques, Edición Volume 14, issue 4, 2021, Página(s) 2749–2769, ISSN 1867-1381
Editor:
Copernicus Gesellschaft mbH
DOI:
10.5194/amt-2020-311
Autores:
Billault-Roux, A.-C., G. Ghiggi , L. Jaffeux, A. Martini, N. Viltard and A. Berne
Publicado en:
Atmospheric Measurement Techniques, Edición vol. 16(4), 2023, ISSN 1867-8548
Editor:
Copernicus
DOI:
10.5194/amt-16-911-2023
Autores:
Billault-Roux, A.-C., P. Georgakaki, J. Gehring, L. Jaffeux, A. Schwarzenboeck, P. Coutris, A. Nenes and A. Berne
Publicado en:
Atmospheric Chemistry and Physics, Edición vol. 23(17), 2023, ISSN 1680-7324
Editor:
Copernicus
DOI:
10.5194/acp-23-10207-2023
Autores:
Jacopo Grazioli, Gionata Ghiggi, Anne-Claire Billault-Roux & Alexis Berne
Publicado en:
Nature, Edición Article number: 186 (2022), 2022, ISSN 0028-0836
Editor:
Nature Publishing Group
Autores:
E. Radenac, G. Blanchard, T. Renaud et Q. Duchayne
Publicado en:
Engineering with Computers, Edición 2023, 2023, ISSN 1435-5663
Editor:
Springer
DOI:
10.1007/s00366-023-01910-y
Autores:
B. Aguilar, P. Trontin, K. Köbschall, F. Dezitter, J. Hussong et P. Villedieu
Publicado en:
International Journal of Heat and Mass Transfer, Edición 2023, 2023, ISSN 1879-2189
Editor:
Elsevier
DOI:
10.1016/j.ijheatmasstransfer.2023.124117
Autores:
Mattia Righi, Johannes Hendricks, Ulrike Lohmann, Christof Gerhard Beer, Valerian Hahn,
Bernd Heinold, Romy Heller, Martina Krämer, Christian Rolf, Ina Tegen, and Christiane Voigt
Publicado en:
Geoscientific Model Development Discussions, Edición September 2019, 2019, ISSN 1991-962X
Editor:
Copernicus Publications
DOI:
10.5194/gmd-2019-212
Autores:
Gallia, Mariachiara, Tommaso Bellosta, and Alberto Guardone
Publicado en:
Journal of Computational and Applied Mathematics, Edición 427.2023, 2023, ISSN 1879-1778
Editor:
Journal of Computational and Applied Mathematics
DOI:
10.1016/j.cam.2023.115114
Autores:
Alessandro Donizetti, Tommaso Bellosta, Andrea Rausa, Barbara Re and Alberto Guardone
Publicado en:
Journal of Aircraft, Edición 4.2023, 2023, ISSN 1533-3868
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/1.c037027
Autores:
Köbschall, K., Traut, B., Roisman, I. V., Tropea, C., & Hussong, J.
Publicado en:
International Journal of Heat and Mass Transfer, Edición 212, 15 September 2023, 2023, ISSN 1879-2189
Editor:
Elsevier
DOI:
10.1016/j.ijheatmasstransfer.2023.124254
Autores:
Lucke, Johannes; Jurkat-Witschas, Tina; Heller, Romy; Hahn, Valerian; Hamman, Matthew; Breitfuss, Wolfgang; Bora, Venkateshwar Reddy; Moser, Manuel; Voigt, Christiane
Publicado en:
Atmospheric Measurement Techniques, Edición Volume 15, Edición 24, 2022, ISSN 1867-1381
Editor:
Copernicus Gesellschaft mbH
DOI:
10.5194/egusphere-2022-647
Autores:
Köbschall, K., Breitenbach, J., Roisman, I. V., Tropea, C., & Hussong, J.
Publicado en:
Experiments in Fluids, Edición 64(1), December 2022, 2023, ISSN 1432-1114
Editor:
Springer
DOI:
10.1007/s00348-022-03539-x
Autores:
Mattia Righi; Johannes Hendricks; Ulrike Lohmann; Christof Gerhard Beer; Valerian Hahn; Bernd Heinold; Romy Heller; Martina Krämer; Michael Ponater; Christian Rolf; Ina Tegen; Christiane Voigt
Publicado en:
Geoscientific Model Development, Edición 1, 2020, ISSN 1991-9603
Editor:
Copernicus Publications
DOI:
10.3929/ethz-b-000410306
Autores:
Knop, I., Bansmer, S., Hahn, V., and Voigt, C
Publicado en:
Atmospheric Measurement Techniques - Discussions, Edición 9 March 2020, 2020, ISSN 1867-8610
Editor:
Copernicus GmbH (Copernicus Publications)
DOI:
10.5194/amt-2019-494
Autores:
B. Aguilar, P. Trontin, L. Reitter, K. Köbschall, F. Dezitter, I. Roisman et P. Villedieu
Publicado en:
AIAA Journal, Edición 2022, 2022, ISSN 1533-385X
Editor:
AIAA
DOI:
10.2514/1.j062122
Autores:
Giulio Gori https://orcid.org/0000-0001-7442-2773, Pietro M. Congedo, Olivier Le Maître, Tommaso Bellosta https://orcid.org/0000-0002-7745-6052 and Alberto Guardone
Publicado en:
Journal of Aircraft, Edición May 2022, 2022, ISSN 1533-3868
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/1.c036545
Autores:
Tommaso Bellosta, Giacomo Baldan, Giuseppe Sirianni, Alberto Guardone
Publicado en:
Journal of Computational and Applied Mathematics, Edición 429. 2023, 2023, ISSN 1879-1778
Editor:
Journal of Computational and Applied Mathematics
DOI:
10.1016/j.cam.2023.115230
Autores:
Myles Morelli, Tommaso Bellosta, Alberto Guardone
Publicado en:
Journal of Computational and Applied Mathematics, Edición 392.2021, 2021, ISSN 1533-3868
Editor:
Journal of Computational and Applied Mathematics
DOI:
10.1016/j.cam.2021.113492
Autores:
Breitfuß, W., Ferschitz, H., Schwarzenboeck, A., Heller, R. et al
Publicado en:
Aerospace, Edición June 15, 2023, 2023, ISSN 0148-7191
Editor:
SAE International
DOI:
10.4271/2023-01-1407
Autores:
Thomas Neubauer, Reinhard Puffing
Publicado en:
AIAA AVIATION 2020 FORUM, 2020, ISBN 978-1-62410-598-2
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2020-2806
Autores:
Biagio M. Esposito; David Orchard; Johannes Lucke; Leonid Nichman; Natalia Bliankinshtein; Lyle Lilie; Pietro Catalano; Francesco D'Aniello; J. Walter Strapp
Publicado en:
SAE Technical Paper, Edición June 20 - 22, 2023, 2023
Editor:
SAE International
DOI:
10.4271/2023-01-1423
Autores:
"""T. Alary, B. Déjean,
P. Berthoumieu,
P. Trontin"""
Publicado en:
AIAA AVIATION 2022 Forum, Edición AIAA Paper 2022-4116, 2022
Editor:
AIAA
DOI:
10.2514/6.2022-4116
Autores:
Myles Morelli, Tommaso Bellosta, Alessandro Donizetti, and Alberto Guardone
Publicado en:
AIAA AVIATION 2022 Forum, Edición AIAA 2022-3307 June 27-July 1, 2022, 2022
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2022-3307
Autores:
Kilian Köbschall, Jan Oberreuter, Jan Breitenbach, Ilia V. Roisman, Cameron Tropea and Jeanette Hussong
Publicado en:
AIAA AVIATION 2021 FORUM, 2021
Editor:
American Institute of Aeronautics and Astronautics,
DOI:
10.2514/6.2021-2682
Autores:
Venkateshwar Reddy Bora, Inken Knop, Johannes Lucke, Tina Jurkat-Witschas
Publicado en:
AIAA SciTech Forum 2023, Edición AIAA 2023-2286, 2023
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2023-2286
Autores:
Giulio Gori; Alessio Raimondi; Alberto Guardone
Publicado en:
AIAA AVIATION 2021 FORUM, Edición 1, 2021
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2021-2683
Autores:
Köbschall, K., Traut, B., Aguilar, B., Roisman, I. V., Tropea, C., & Hussong, J.
Publicado en:
AIAA AVIATION 2022 Forum, Edición AIAA 2022-3371, 20 Jun 2022, 2022
Editor:
AIAA
DOI:
10.2514/6.2022-3371
Autores:
D. de Rosa, F. Capizzano and D. Cinquegrana
Publicado en:
SAE Technical Paper, Edición June 20 - 22, 2023, 2023
Editor:
SAE International
DOI:
10.4271/2023-01-1484
Autores:
"""B. Déjean, T. Alary,
Q. Duchayne, Berthoumieu P. """
Publicado en:
SAE Technical Paper, Edición No. 2023-01-1408, 2023
Editor:
SAE
DOI:
10.4271/2023-01-1408
Autores:
Alessandro Donizetti, Tommaso Bellosta and Alberto Guardone
Publicado en:
SAE Technical Paper, Edición June 20 - 22, 2023, 2023
Editor:
SAE International
DOI:
10.4271/2023-01-1467
Autores:
F. Capizzano and D. de Rosa
Publicado en:
SAE Technical Paper, Edición June 20 - 22, 2023, 2023
Editor:
SAE International
DOI:
10.4271/2023-01-1470
Autores:
Venkateshwar Reddy Bora, Mariachiara Gallia, Inken Knop, Alberto Guardone
Publicado en:
SAE Technical Paper, Edición June 20 - 22, 2023, 2023
Editor:
SAE International
DOI:
10.4271/2023-01-1406
Autores:
D. Cinquegrana, F. D'Aniello, D. de Rosa, A. Carozza et al.
Publicado en:
SAE Technical Paper, Edición June 20 - 22, 2023, 2023
Editor:
SAE International
Autores:
Thomas Neubauer, David Kozomara, Reinhard Puffing, Wolfgang Hassler
Publicado en:
SAE Technical Paper Series, Edición 2019-01-1992, 2019, Página(s) 13, ISSN 0148-7191
Editor:
SAE International
DOI:
10.4271/2019-01-1992
Autores:
P. Catalano and B. Mele
Publicado en:
SAE Technical Paper, Edición June 20 - 22, 2023, 2023
Editor:
SAE International
DOI:
10.4271/2023-01-1459
Autores:
Thomas Neubauer, Wolfgang Hassler, Reinhard Puffing
Publicado en:
AIAA AVIATION 2020 FORUM, 2020, ISBN 978-1-62410-598-2
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2020-2805
Autores:
Sirianni, G. A. G.; Bellosta, T.; Re, B.; Guardone, A.
Publicado en:
AIAA AVIATION 2022 Forum, Edición AIAA 2022-3695 June 27-July 1, 2022, 2022
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2022-3695
Autores:
Boris Aguilar; Kilian Köbschall; Louis M. Reitter; Pierre Trontin; Fabien Dezitter; Jan Breitenbach; Ilia V. Roisman; Olivier Rouzaud; Philippe Villedieu
Publicado en:
AIAA AVIATION 2021 FORUM, Edición 1, 2021
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2021-2684
Autores:
Alessandro Donizetti, Andrea Rausa, Tommaso Bellosta, Barbara Re and Alberto Guardone
Publicado en:
AIAA AVIATION 2024 Forum, Edición """AIAA 2024-2679 8-12 January 2024""", 2024
Editor:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2024-2679
Autores:
Denis Sotomayor-Zakharov
Publicado en:
Forschungsbericht Niedersächsisches Forschungszentrum für Luftfahrt, Edición Bd. 2023-12 (29.01.2024), 2024
Editor:
Niedersächsisches Forschungszentrum für Luftfahrt
DOI:
10.24355/dbbs.084-202401191241-0
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles