Rezultaty
Detailed report on investigations to correctly generate the Freezing Rain clouds in wind tunnel based on existing techniques. Related task(s): Task 6.3.
ICE GENESIS - synthesis of results and way forwardPublic synthesis of all the outcomes of ICE GENESIS. It will thus cover App C, App O and snow conditions, WTT and numerical tools improvements. Related task(s): Task 2.3.
Report on the review, assessment and selection of instrumentation for PSDReview and selection of the best instrumentation to detect the PSD under appendix CO conditions in WT facilities Related tasks Task 41
Proposal of calibration instruments and procedures for FZDZDetailed report defining a calibration methodology installation requirements and the measurement procedures of the instruments for MVD, PSD, and bulk LWC for FZDZ in IWT. Related task(s): Task 6.1.
Report on the development and assessment of 3D-scanning systems and associated evaluation toolReport on selection and optimization of a 3D-scanning system for W/T facilities for experiments with different test specimen to characterize 3D ice shape, surface roughness, and ice density (combined with weighing device). Related task(s): Task 4.5.
Proposal of calibration instruments and procedures for FZRADetailed report defining a calibration methodology installation requirements and the measurement procedures of the instruments for MVD, PSD, and bulk LWC for FZRA in IWT. Related task(s): Task 6.1.
Definition of the target requirements for test facilities operating envelopes for snowDetailed report describing the icing conditions and A/C operating envelopes needeed to be investigated to support design validation and certification in snow conditions and defining the operating envelope of IWT, the characteristics of instrumentation to be used for measurements and the relevant parameters to be investigated in order to be able to define an experimental envelope being compliant with requirements. Related task(s): Task 3.2.
Public synthesis of liquid icing physics models and tools improvementsPublic final report on improved numerical capabilities with respect to SLD models and 3D ice accretion methodologies. Related task(s): Task 9.3 and 9.4.
Definition of the target requirements for test facilities operating envelopes for App ODetailed report describing the icing conditions and A/C operating envelopes needeed to be investigated to support design validation and certification in App. O conditions and defining the operating envelope of IWT, the characteristics of instrumentation to be used for measurements and the relevant parameters to be investigated in order to be able to define an experimental envelope being compliant with requirements. Related task(s): Task 3.1.
Definition of numerical capability requirements for snowDetailed report presenting an exhaustive literature review on the existing models, numerical techniques and experimental data that are currently available for the development of 3D numerical tools for snow. Then requirements will be defined in terms of basic tests to be performed in WP10, model features, model accuracy, numerical techniques to be used, interface with existing industrial tools, and validation procedure. Related task(s): Task 3.6.
Public synthesis of snow icing physics models and tools improvementsPublic final report on improved numerical capabilities with respect to snow icing physiscs (trajectory, impact and accretion). Related task(s): Task 10.3.
Synthesis & Characterization of snow microphysical propertiesReport providing validated methods for the retrieval of the microphysical properties of snow clouds at ground stations in wind tunnels for aircraft campaign data Description of the microphysical and dynamical characteristics of snow clouds Related tasks Task 55
Selection of most suitable instrumentation for F/TReview of available airborne instrumentation for snow microphysical properties characterization (bulk LWC/IWC/TWC, number and mass PSD, snow crystals' shapes) and according definition of ICE GENESIS snow flight tests aircraft payload. Related task(s): Task 5.1.
Report on the review and assessment of instrumentation/model for droplet temperature measurement and homogeneity characterizationReport on the selection of best suitable instrumentation for large test facility calibration definition of the requirements for instrumentation installation needs taking into account the specific constraints of large scale facilities and estimation of supercooling of droplets Related tasks Task 43 and 44
Report on the review, assessment and selection of instrumentation for LWCReview and selection of the best instrumentation to measure LWC under appendix CO conditions in WT facilities Related tasks Task 42
Calibration methodology for snow test facilityDetailed report of used calibration methodology and criteria for producible snow capacity and quality for Go/No-Go decision gate. It will also inlude guidance to standardisation working groups (EUROCAE, SAE). Related task(s): Task 7.4.
Report on the validation test main conclusions and best numerical practicesFinal report on the outcome of the validation exercise in terms of capability maturity as well as in terms of numerical best practices. Related task(s): Task 11.1, 11.2 and 11.3.
Definition of numerical capability requirements for liquid icing conditionsDetailed report presenting an exhaustive literature review on the existing models, numerical techniques and experimental data that are currently available for the development of 3D numerical tools for App C and O. Then requirements will be defined in terms of basic tests to be performed in WP9, model features, model accuracy, numerical techniques to be used, interface with existing industrial tools, and validation procedure. Related task(s): Task 3.5.
Assessment of improved FZDZ capabilities for each IWT involved in the projectReport on selection of the spray nozzles to use in wind tunnel for FZDZ generation. Report on the improvement of the capabilities of IWT in FZDZ and assessment of the performance of spray bar system to generate bi-modal distribution and low LWC. Related task(s): Task 6.2.
Selection of most suitable instrumentation for IWT/T calibrationReview of available instrumentation for bulk LWC/IWC/TWC, snow number PSD, wind tunnel homogeneity measurement and according selection of most suitable instrumentation for IWT calibration. Related task(s): Task 5.2.
The public website will be used as a communication tool. Project information will be made available for download including public deliverables, flyers, posters, etc. Announcements and information on events will also be provided. It will be updated regularly (task 2.1). Related task(s): Task 2.1.
Initial communication kit with information about project structure and objectives. The communication kit is expected to include a flyer / leaflet and a poster, as well as a presentation template (task 2.1). Related task(s): Task 2.1.
Publikacje
Autorzy:
Anne-Claire Billault-Roux; Alexis Berne
Opublikowane w:
Atmospheric Measurement Techniques, Numer Volume 14, issue 4, 2021, Strona(/y) 2749–2769, ISSN 1867-1381
Wydawca:
Copernicus Gesellschaft mbH
DOI:
10.5194/amt-2020-311
Autorzy:
Billault-Roux, A.-C., G. Ghiggi , L. Jaffeux, A. Martini, N. Viltard and A. Berne
Opublikowane w:
Atmospheric Measurement Techniques, Numer vol. 16(4), 2023, ISSN 1867-8548
Wydawca:
Copernicus
DOI:
10.5194/amt-16-911-2023
Autorzy:
Billault-Roux, A.-C., P. Georgakaki, J. Gehring, L. Jaffeux, A. Schwarzenboeck, P. Coutris, A. Nenes and A. Berne
Opublikowane w:
Atmospheric Chemistry and Physics, Numer vol. 23(17), 2023, ISSN 1680-7324
Wydawca:
Copernicus
DOI:
10.5194/acp-23-10207-2023
Autorzy:
Jacopo Grazioli, Gionata Ghiggi, Anne-Claire Billault-Roux & Alexis Berne
Opublikowane w:
Nature, Numer Article number: 186 (2022), 2022, ISSN 0028-0836
Wydawca:
Nature Publishing Group
Autorzy:
E. Radenac, G. Blanchard, T. Renaud et Q. Duchayne
Opublikowane w:
Engineering with Computers, Numer 2023, 2023, ISSN 1435-5663
Wydawca:
Springer
DOI:
10.1007/s00366-023-01910-y
Autorzy:
B. Aguilar, P. Trontin, K. Köbschall, F. Dezitter, J. Hussong et P. Villedieu
Opublikowane w:
International Journal of Heat and Mass Transfer, Numer 2023, 2023, ISSN 1879-2189
Wydawca:
Elsevier
DOI:
10.1016/j.ijheatmasstransfer.2023.124117
Autorzy:
Mattia Righi, Johannes Hendricks, Ulrike Lohmann, Christof Gerhard Beer, Valerian Hahn,
Bernd Heinold, Romy Heller, Martina Krämer, Christian Rolf, Ina Tegen, and Christiane Voigt
Opublikowane w:
Geoscientific Model Development Discussions, Numer September 2019, 2019, ISSN 1991-962X
Wydawca:
Copernicus Publications
DOI:
10.5194/gmd-2019-212
Autorzy:
Gallia, Mariachiara, Tommaso Bellosta, and Alberto Guardone
Opublikowane w:
Journal of Computational and Applied Mathematics, Numer 427.2023, 2023, ISSN 1879-1778
Wydawca:
Journal of Computational and Applied Mathematics
DOI:
10.1016/j.cam.2023.115114
Autorzy:
Alessandro Donizetti, Tommaso Bellosta, Andrea Rausa, Barbara Re and Alberto Guardone
Opublikowane w:
Journal of Aircraft, Numer 4.2023, 2023, ISSN 1533-3868
Wydawca:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/1.c037027
Autorzy:
Köbschall, K., Traut, B., Roisman, I. V., Tropea, C., & Hussong, J.
Opublikowane w:
International Journal of Heat and Mass Transfer, Numer 212, 15 September 2023, 2023, ISSN 1879-2189
Wydawca:
Elsevier
DOI:
10.1016/j.ijheatmasstransfer.2023.124254
Autorzy:
Lucke, Johannes; Jurkat-Witschas, Tina; Heller, Romy; Hahn, Valerian; Hamman, Matthew; Breitfuss, Wolfgang; Bora, Venkateshwar Reddy; Moser, Manuel; Voigt, Christiane
Opublikowane w:
Atmospheric Measurement Techniques, Numer Volume 15, Numer 24, 2022, ISSN 1867-1381
Wydawca:
Copernicus Gesellschaft mbH
DOI:
10.5194/egusphere-2022-647
Autorzy:
Köbschall, K., Breitenbach, J., Roisman, I. V., Tropea, C., & Hussong, J.
Opublikowane w:
Experiments in Fluids, Numer 64(1), December 2022, 2023, ISSN 1432-1114
Wydawca:
Springer
DOI:
10.1007/s00348-022-03539-x
Autorzy:
Mattia Righi; Johannes Hendricks; Ulrike Lohmann; Christof Gerhard Beer; Valerian Hahn; Bernd Heinold; Romy Heller; Martina Krämer; Michael Ponater; Christian Rolf; Ina Tegen; Christiane Voigt
Opublikowane w:
Geoscientific Model Development, Numer 1, 2020, ISSN 1991-9603
Wydawca:
Copernicus Publications
DOI:
10.3929/ethz-b-000410306
Autorzy:
Knop, I., Bansmer, S., Hahn, V., and Voigt, C
Opublikowane w:
Atmospheric Measurement Techniques - Discussions, Numer 9 March 2020, 2020, ISSN 1867-8610
Wydawca:
Copernicus GmbH (Copernicus Publications)
DOI:
10.5194/amt-2019-494
Autorzy:
B. Aguilar, P. Trontin, L. Reitter, K. Köbschall, F. Dezitter, I. Roisman et P. Villedieu
Opublikowane w:
AIAA Journal, Numer 2022, 2022, ISSN 1533-385X
Wydawca:
AIAA
DOI:
10.2514/1.j062122
Autorzy:
Giulio Gori https://orcid.org/0000-0001-7442-2773, Pietro M. Congedo, Olivier Le Maître, Tommaso Bellosta https://orcid.org/0000-0002-7745-6052 and Alberto Guardone
Opublikowane w:
Journal of Aircraft, Numer May 2022, 2022, ISSN 1533-3868
Wydawca:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/1.c036545
Autorzy:
Tommaso Bellosta, Giacomo Baldan, Giuseppe Sirianni, Alberto Guardone
Opublikowane w:
Journal of Computational and Applied Mathematics, Numer 429. 2023, 2023, ISSN 1879-1778
Wydawca:
Journal of Computational and Applied Mathematics
DOI:
10.1016/j.cam.2023.115230
Autorzy:
Myles Morelli, Tommaso Bellosta, Alberto Guardone
Opublikowane w:
Journal of Computational and Applied Mathematics, Numer 392.2021, 2021, ISSN 1533-3868
Wydawca:
Journal of Computational and Applied Mathematics
DOI:
10.1016/j.cam.2021.113492
Autorzy:
Breitfuß, W., Ferschitz, H., Schwarzenboeck, A., Heller, R. et al
Opublikowane w:
Aerospace, Numer June 15, 2023, 2023, ISSN 0148-7191
Wydawca:
SAE International
DOI:
10.4271/2023-01-1407
Autorzy:
Thomas Neubauer, Reinhard Puffing
Opublikowane w:
AIAA AVIATION 2020 FORUM, 2020, ISBN 978-1-62410-598-2
Wydawca:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2020-2806
Autorzy:
Biagio M. Esposito; David Orchard; Johannes Lucke; Leonid Nichman; Natalia Bliankinshtein; Lyle Lilie; Pietro Catalano; Francesco D'Aniello; J. Walter Strapp
Opublikowane w:
SAE Technical Paper, Numer June 20 - 22, 2023, 2023
Wydawca:
SAE International
DOI:
10.4271/2023-01-1423
Autorzy:
"""T. Alary, B. Déjean,
P. Berthoumieu,
P. Trontin"""
Opublikowane w:
AIAA AVIATION 2022 Forum, Numer AIAA Paper 2022-4116, 2022
Wydawca:
AIAA
DOI:
10.2514/6.2022-4116
Autorzy:
Myles Morelli, Tommaso Bellosta, Alessandro Donizetti, and Alberto Guardone
Opublikowane w:
AIAA AVIATION 2022 Forum, Numer AIAA 2022-3307 June 27-July 1, 2022, 2022
Wydawca:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2022-3307
Autorzy:
Kilian Köbschall, Jan Oberreuter, Jan Breitenbach, Ilia V. Roisman, Cameron Tropea and Jeanette Hussong
Opublikowane w:
AIAA AVIATION 2021 FORUM, 2021
Wydawca:
American Institute of Aeronautics and Astronautics,
DOI:
10.2514/6.2021-2682
Autorzy:
Venkateshwar Reddy Bora, Inken Knop, Johannes Lucke, Tina Jurkat-Witschas
Opublikowane w:
AIAA SciTech Forum 2023, Numer AIAA 2023-2286, 2023
Wydawca:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2023-2286
Autorzy:
Giulio Gori; Alessio Raimondi; Alberto Guardone
Opublikowane w:
AIAA AVIATION 2021 FORUM, Numer 1, 2021
Wydawca:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2021-2683
Autorzy:
Köbschall, K., Traut, B., Aguilar, B., Roisman, I. V., Tropea, C., & Hussong, J.
Opublikowane w:
AIAA AVIATION 2022 Forum, Numer AIAA 2022-3371, 20 Jun 2022, 2022
Wydawca:
AIAA
DOI:
10.2514/6.2022-3371
Autorzy:
D. de Rosa, F. Capizzano and D. Cinquegrana
Opublikowane w:
SAE Technical Paper, Numer June 20 - 22, 2023, 2023
Wydawca:
SAE International
DOI:
10.4271/2023-01-1484
Autorzy:
"""B. Déjean, T. Alary,
Q. Duchayne, Berthoumieu P. """
Opublikowane w:
SAE Technical Paper, Numer No. 2023-01-1408, 2023
Wydawca:
SAE
DOI:
10.4271/2023-01-1408
Autorzy:
Alessandro Donizetti, Tommaso Bellosta and Alberto Guardone
Opublikowane w:
SAE Technical Paper, Numer June 20 - 22, 2023, 2023
Wydawca:
SAE International
DOI:
10.4271/2023-01-1467
Autorzy:
F. Capizzano and D. de Rosa
Opublikowane w:
SAE Technical Paper, Numer June 20 - 22, 2023, 2023
Wydawca:
SAE International
DOI:
10.4271/2023-01-1470
Autorzy:
Venkateshwar Reddy Bora, Mariachiara Gallia, Inken Knop, Alberto Guardone
Opublikowane w:
SAE Technical Paper, Numer June 20 - 22, 2023, 2023
Wydawca:
SAE International
DOI:
10.4271/2023-01-1406
Autorzy:
D. Cinquegrana, F. D'Aniello, D. de Rosa, A. Carozza et al.
Opublikowane w:
SAE Technical Paper, Numer June 20 - 22, 2023, 2023
Wydawca:
SAE International
Autorzy:
Thomas Neubauer, David Kozomara, Reinhard Puffing, Wolfgang Hassler
Opublikowane w:
SAE Technical Paper Series, Numer 2019-01-1992, 2019, Strona(/y) 13, ISSN 0148-7191
Wydawca:
SAE International
DOI:
10.4271/2019-01-1992
Autorzy:
P. Catalano and B. Mele
Opublikowane w:
SAE Technical Paper, Numer June 20 - 22, 2023, 2023
Wydawca:
SAE International
DOI:
10.4271/2023-01-1459
Autorzy:
Thomas Neubauer, Wolfgang Hassler, Reinhard Puffing
Opublikowane w:
AIAA AVIATION 2020 FORUM, 2020, ISBN 978-1-62410-598-2
Wydawca:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2020-2805
Autorzy:
Sirianni, G. A. G.; Bellosta, T.; Re, B.; Guardone, A.
Opublikowane w:
AIAA AVIATION 2022 Forum, Numer AIAA 2022-3695 June 27-July 1, 2022, 2022
Wydawca:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2022-3695
Autorzy:
Boris Aguilar; Kilian Köbschall; Louis M. Reitter; Pierre Trontin; Fabien Dezitter; Jan Breitenbach; Ilia V. Roisman; Olivier Rouzaud; Philippe Villedieu
Opublikowane w:
AIAA AVIATION 2021 FORUM, Numer 1, 2021
Wydawca:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2021-2684
Autorzy:
Alessandro Donizetti, Andrea Rausa, Tommaso Bellosta, Barbara Re and Alberto Guardone
Opublikowane w:
AIAA AVIATION 2024 Forum, Numer """AIAA 2024-2679 8-12 January 2024""", 2024
Wydawca:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2024-2679
Autorzy:
Denis Sotomayor-Zakharov
Opublikowane w:
Forschungsbericht Niedersächsisches Forschungszentrum für Luftfahrt, Numer Bd. 2023-12 (29.01.2024), 2024
Wydawca:
Niedersächsisches Forschungszentrum für Luftfahrt
DOI:
10.24355/dbbs.084-202401191241-0
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników