Livrables
Detailed report on investigations to correctly generate the Freezing Rain clouds in wind tunnel based on existing techniques. Related task(s): Task 6.3.
ICE GENESIS - synthesis of results and way forwardPublic synthesis of all the outcomes of ICE GENESIS. It will thus cover App C, App O and snow conditions, WTT and numerical tools improvements. Related task(s): Task 2.3.
Report on the review, assessment and selection of instrumentation for PSDReview and selection of the best instrumentation to detect the PSD under appendix CO conditions in WT facilities Related tasks Task 41
Proposal of calibration instruments and procedures for FZDZDetailed report defining a calibration methodology installation requirements and the measurement procedures of the instruments for MVD, PSD, and bulk LWC for FZDZ in IWT. Related task(s): Task 6.1.
Report on the development and assessment of 3D-scanning systems and associated evaluation toolReport on selection and optimization of a 3D-scanning system for W/T facilities for experiments with different test specimen to characterize 3D ice shape, surface roughness, and ice density (combined with weighing device). Related task(s): Task 4.5.
Proposal of calibration instruments and procedures for FZRADetailed report defining a calibration methodology installation requirements and the measurement procedures of the instruments for MVD, PSD, and bulk LWC for FZRA in IWT. Related task(s): Task 6.1.
Definition of the target requirements for test facilities operating envelopes for snowDetailed report describing the icing conditions and A/C operating envelopes needeed to be investigated to support design validation and certification in snow conditions and defining the operating envelope of IWT, the characteristics of instrumentation to be used for measurements and the relevant parameters to be investigated in order to be able to define an experimental envelope being compliant with requirements. Related task(s): Task 3.2.
Public synthesis of liquid icing physics models and tools improvementsPublic final report on improved numerical capabilities with respect to SLD models and 3D ice accretion methodologies. Related task(s): Task 9.3 and 9.4.
Definition of the target requirements for test facilities operating envelopes for App ODetailed report describing the icing conditions and A/C operating envelopes needeed to be investigated to support design validation and certification in App. O conditions and defining the operating envelope of IWT, the characteristics of instrumentation to be used for measurements and the relevant parameters to be investigated in order to be able to define an experimental envelope being compliant with requirements. Related task(s): Task 3.1.
Definition of numerical capability requirements for snowDetailed report presenting an exhaustive literature review on the existing models, numerical techniques and experimental data that are currently available for the development of 3D numerical tools for snow. Then requirements will be defined in terms of basic tests to be performed in WP10, model features, model accuracy, numerical techniques to be used, interface with existing industrial tools, and validation procedure. Related task(s): Task 3.6.
Public synthesis of snow icing physics models and tools improvementsPublic final report on improved numerical capabilities with respect to snow icing physiscs (trajectory, impact and accretion). Related task(s): Task 10.3.
Synthesis & Characterization of snow microphysical propertiesReport providing validated methods for the retrieval of the microphysical properties of snow clouds at ground stations in wind tunnels for aircraft campaign data Description of the microphysical and dynamical characteristics of snow clouds Related tasks Task 55
Selection of most suitable instrumentation for F/TReview of available airborne instrumentation for snow microphysical properties characterization (bulk LWC/IWC/TWC, number and mass PSD, snow crystals' shapes) and according definition of ICE GENESIS snow flight tests aircraft payload. Related task(s): Task 5.1.
Report on the review and assessment of instrumentation/model for droplet temperature measurement and homogeneity characterizationReport on the selection of best suitable instrumentation for large test facility calibration definition of the requirements for instrumentation installation needs taking into account the specific constraints of large scale facilities and estimation of supercooling of droplets Related tasks Task 43 and 44
Report on the review, assessment and selection of instrumentation for LWCReview and selection of the best instrumentation to measure LWC under appendix CO conditions in WT facilities Related tasks Task 42
Calibration methodology for snow test facilityDetailed report of used calibration methodology and criteria for producible snow capacity and quality for Go/No-Go decision gate. It will also inlude guidance to standardisation working groups (EUROCAE, SAE). Related task(s): Task 7.4.
Report on the validation test main conclusions and best numerical practicesFinal report on the outcome of the validation exercise in terms of capability maturity as well as in terms of numerical best practices. Related task(s): Task 11.1, 11.2 and 11.3.
Definition of numerical capability requirements for liquid icing conditionsDetailed report presenting an exhaustive literature review on the existing models, numerical techniques and experimental data that are currently available for the development of 3D numerical tools for App C and O. Then requirements will be defined in terms of basic tests to be performed in WP9, model features, model accuracy, numerical techniques to be used, interface with existing industrial tools, and validation procedure. Related task(s): Task 3.5.
Assessment of improved FZDZ capabilities for each IWT involved in the projectReport on selection of the spray nozzles to use in wind tunnel for FZDZ generation. Report on the improvement of the capabilities of IWT in FZDZ and assessment of the performance of spray bar system to generate bi-modal distribution and low LWC. Related task(s): Task 6.2.
Selection of most suitable instrumentation for IWT/T calibrationReview of available instrumentation for bulk LWC/IWC/TWC, snow number PSD, wind tunnel homogeneity measurement and according selection of most suitable instrumentation for IWT calibration. Related task(s): Task 5.2.
The public website will be used as a communication tool. Project information will be made available for download including public deliverables, flyers, posters, etc. Announcements and information on events will also be provided. It will be updated regularly (task 2.1). Related task(s): Task 2.1.
Initial communication kit with information about project structure and objectives. The communication kit is expected to include a flyer / leaflet and a poster, as well as a presentation template (task 2.1). Related task(s): Task 2.1.
Publications
Auteurs:
Anne-Claire Billault-Roux; Alexis Berne
Publié dans:
Atmospheric Measurement Techniques, Numéro Volume 14, issue 4, 2021, Page(s) 2749–2769, ISSN 1867-1381
Éditeur:
Copernicus Gesellschaft mbH
DOI:
10.5194/amt-2020-311
Auteurs:
Billault-Roux, A.-C., G. Ghiggi , L. Jaffeux, A. Martini, N. Viltard and A. Berne
Publié dans:
Atmospheric Measurement Techniques, Numéro vol. 16(4), 2023, ISSN 1867-8548
Éditeur:
Copernicus
DOI:
10.5194/amt-16-911-2023
Auteurs:
Billault-Roux, A.-C., P. Georgakaki, J. Gehring, L. Jaffeux, A. Schwarzenboeck, P. Coutris, A. Nenes and A. Berne
Publié dans:
Atmospheric Chemistry and Physics, Numéro vol. 23(17), 2023, ISSN 1680-7324
Éditeur:
Copernicus
DOI:
10.5194/acp-23-10207-2023
Auteurs:
Jacopo Grazioli, Gionata Ghiggi, Anne-Claire Billault-Roux & Alexis Berne
Publié dans:
Nature, Numéro Article number: 186 (2022), 2022, ISSN 0028-0836
Éditeur:
Nature Publishing Group
Auteurs:
E. Radenac, G. Blanchard, T. Renaud et Q. Duchayne
Publié dans:
Engineering with Computers, Numéro 2023, 2023, ISSN 1435-5663
Éditeur:
Springer
DOI:
10.1007/s00366-023-01910-y
Auteurs:
B. Aguilar, P. Trontin, K. Köbschall, F. Dezitter, J. Hussong et P. Villedieu
Publié dans:
International Journal of Heat and Mass Transfer, Numéro 2023, 2023, ISSN 1879-2189
Éditeur:
Elsevier
DOI:
10.1016/j.ijheatmasstransfer.2023.124117
Auteurs:
Mattia Righi, Johannes Hendricks, Ulrike Lohmann, Christof Gerhard Beer, Valerian Hahn,
Bernd Heinold, Romy Heller, Martina Krämer, Christian Rolf, Ina Tegen, and Christiane Voigt
Publié dans:
Geoscientific Model Development Discussions, Numéro September 2019, 2019, ISSN 1991-962X
Éditeur:
Copernicus Publications
DOI:
10.5194/gmd-2019-212
Auteurs:
Gallia, Mariachiara, Tommaso Bellosta, and Alberto Guardone
Publié dans:
Journal of Computational and Applied Mathematics, Numéro 427.2023, 2023, ISSN 1879-1778
Éditeur:
Journal of Computational and Applied Mathematics
DOI:
10.1016/j.cam.2023.115114
Auteurs:
Alessandro Donizetti, Tommaso Bellosta, Andrea Rausa, Barbara Re and Alberto Guardone
Publié dans:
Journal of Aircraft, Numéro 4.2023, 2023, ISSN 1533-3868
Éditeur:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/1.c037027
Auteurs:
Köbschall, K., Traut, B., Roisman, I. V., Tropea, C., & Hussong, J.
Publié dans:
International Journal of Heat and Mass Transfer, Numéro 212, 15 September 2023, 2023, ISSN 1879-2189
Éditeur:
Elsevier
DOI:
10.1016/j.ijheatmasstransfer.2023.124254
Auteurs:
Lucke, Johannes; Jurkat-Witschas, Tina; Heller, Romy; Hahn, Valerian; Hamman, Matthew; Breitfuss, Wolfgang; Bora, Venkateshwar Reddy; Moser, Manuel; Voigt, Christiane
Publié dans:
Atmospheric Measurement Techniques, Numéro Volume 15, Numéro 24, 2022, ISSN 1867-1381
Éditeur:
Copernicus Gesellschaft mbH
DOI:
10.5194/egusphere-2022-647
Auteurs:
Köbschall, K., Breitenbach, J., Roisman, I. V., Tropea, C., & Hussong, J.
Publié dans:
Experiments in Fluids, Numéro 64(1), December 2022, 2023, ISSN 1432-1114
Éditeur:
Springer
DOI:
10.1007/s00348-022-03539-x
Auteurs:
Mattia Righi; Johannes Hendricks; Ulrike Lohmann; Christof Gerhard Beer; Valerian Hahn; Bernd Heinold; Romy Heller; Martina Krämer; Michael Ponater; Christian Rolf; Ina Tegen; Christiane Voigt
Publié dans:
Geoscientific Model Development, Numéro 1, 2020, ISSN 1991-9603
Éditeur:
Copernicus Publications
DOI:
10.3929/ethz-b-000410306
Auteurs:
Knop, I., Bansmer, S., Hahn, V., and Voigt, C
Publié dans:
Atmospheric Measurement Techniques - Discussions, Numéro 9 March 2020, 2020, ISSN 1867-8610
Éditeur:
Copernicus GmbH (Copernicus Publications)
DOI:
10.5194/amt-2019-494
Auteurs:
B. Aguilar, P. Trontin, L. Reitter, K. Köbschall, F. Dezitter, I. Roisman et P. Villedieu
Publié dans:
AIAA Journal, Numéro 2022, 2022, ISSN 1533-385X
Éditeur:
AIAA
DOI:
10.2514/1.j062122
Auteurs:
Giulio Gori https://orcid.org/0000-0001-7442-2773, Pietro M. Congedo, Olivier Le Maître, Tommaso Bellosta https://orcid.org/0000-0002-7745-6052 and Alberto Guardone
Publié dans:
Journal of Aircraft, Numéro May 2022, 2022, ISSN 1533-3868
Éditeur:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/1.c036545
Auteurs:
Tommaso Bellosta, Giacomo Baldan, Giuseppe Sirianni, Alberto Guardone
Publié dans:
Journal of Computational and Applied Mathematics, Numéro 429. 2023, 2023, ISSN 1879-1778
Éditeur:
Journal of Computational and Applied Mathematics
DOI:
10.1016/j.cam.2023.115230
Auteurs:
Myles Morelli, Tommaso Bellosta, Alberto Guardone
Publié dans:
Journal of Computational and Applied Mathematics, Numéro 392.2021, 2021, ISSN 1533-3868
Éditeur:
Journal of Computational and Applied Mathematics
DOI:
10.1016/j.cam.2021.113492
Auteurs:
Breitfuß, W., Ferschitz, H., Schwarzenboeck, A., Heller, R. et al
Publié dans:
Aerospace, Numéro June 15, 2023, 2023, ISSN 0148-7191
Éditeur:
SAE International
DOI:
10.4271/2023-01-1407
Auteurs:
Thomas Neubauer, Reinhard Puffing
Publié dans:
AIAA AVIATION 2020 FORUM, 2020, ISBN 978-1-62410-598-2
Éditeur:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2020-2806
Auteurs:
Biagio M. Esposito; David Orchard; Johannes Lucke; Leonid Nichman; Natalia Bliankinshtein; Lyle Lilie; Pietro Catalano; Francesco D'Aniello; J. Walter Strapp
Publié dans:
SAE Technical Paper, Numéro June 20 - 22, 2023, 2023
Éditeur:
SAE International
DOI:
10.4271/2023-01-1423
Auteurs:
"""T. Alary, B. Déjean,
P. Berthoumieu,
P. Trontin"""
Publié dans:
AIAA AVIATION 2022 Forum, Numéro AIAA Paper 2022-4116, 2022
Éditeur:
AIAA
DOI:
10.2514/6.2022-4116
Auteurs:
Myles Morelli, Tommaso Bellosta, Alessandro Donizetti, and Alberto Guardone
Publié dans:
AIAA AVIATION 2022 Forum, Numéro AIAA 2022-3307 June 27-July 1, 2022, 2022
Éditeur:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2022-3307
Auteurs:
Kilian Köbschall, Jan Oberreuter, Jan Breitenbach, Ilia V. Roisman, Cameron Tropea and Jeanette Hussong
Publié dans:
AIAA AVIATION 2021 FORUM, 2021
Éditeur:
American Institute of Aeronautics and Astronautics,
DOI:
10.2514/6.2021-2682
Auteurs:
Venkateshwar Reddy Bora, Inken Knop, Johannes Lucke, Tina Jurkat-Witschas
Publié dans:
AIAA SciTech Forum 2023, Numéro AIAA 2023-2286, 2023
Éditeur:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2023-2286
Auteurs:
Giulio Gori; Alessio Raimondi; Alberto Guardone
Publié dans:
AIAA AVIATION 2021 FORUM, Numéro 1, 2021
Éditeur:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2021-2683
Auteurs:
Köbschall, K., Traut, B., Aguilar, B., Roisman, I. V., Tropea, C., & Hussong, J.
Publié dans:
AIAA AVIATION 2022 Forum, Numéro AIAA 2022-3371, 20 Jun 2022, 2022
Éditeur:
AIAA
DOI:
10.2514/6.2022-3371
Auteurs:
D. de Rosa, F. Capizzano and D. Cinquegrana
Publié dans:
SAE Technical Paper, Numéro June 20 - 22, 2023, 2023
Éditeur:
SAE International
DOI:
10.4271/2023-01-1484
Auteurs:
"""B. Déjean, T. Alary,
Q. Duchayne, Berthoumieu P. """
Publié dans:
SAE Technical Paper, Numéro No. 2023-01-1408, 2023
Éditeur:
SAE
DOI:
10.4271/2023-01-1408
Auteurs:
Alessandro Donizetti, Tommaso Bellosta and Alberto Guardone
Publié dans:
SAE Technical Paper, Numéro June 20 - 22, 2023, 2023
Éditeur:
SAE International
DOI:
10.4271/2023-01-1467
Auteurs:
F. Capizzano and D. de Rosa
Publié dans:
SAE Technical Paper, Numéro June 20 - 22, 2023, 2023
Éditeur:
SAE International
DOI:
10.4271/2023-01-1470
Auteurs:
Venkateshwar Reddy Bora, Mariachiara Gallia, Inken Knop, Alberto Guardone
Publié dans:
SAE Technical Paper, Numéro June 20 - 22, 2023, 2023
Éditeur:
SAE International
DOI:
10.4271/2023-01-1406
Auteurs:
D. Cinquegrana, F. D'Aniello, D. de Rosa, A. Carozza et al.
Publié dans:
SAE Technical Paper, Numéro June 20 - 22, 2023, 2023
Éditeur:
SAE International
Auteurs:
Thomas Neubauer, David Kozomara, Reinhard Puffing, Wolfgang Hassler
Publié dans:
SAE Technical Paper Series, Numéro 2019-01-1992, 2019, Page(s) 13, ISSN 0148-7191
Éditeur:
SAE International
DOI:
10.4271/2019-01-1992
Auteurs:
P. Catalano and B. Mele
Publié dans:
SAE Technical Paper, Numéro June 20 - 22, 2023, 2023
Éditeur:
SAE International
DOI:
10.4271/2023-01-1459
Auteurs:
Thomas Neubauer, Wolfgang Hassler, Reinhard Puffing
Publié dans:
AIAA AVIATION 2020 FORUM, 2020, ISBN 978-1-62410-598-2
Éditeur:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2020-2805
Auteurs:
Sirianni, G. A. G.; Bellosta, T.; Re, B.; Guardone, A.
Publié dans:
AIAA AVIATION 2022 Forum, Numéro AIAA 2022-3695 June 27-July 1, 2022, 2022
Éditeur:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2022-3695
Auteurs:
Boris Aguilar; Kilian Köbschall; Louis M. Reitter; Pierre Trontin; Fabien Dezitter; Jan Breitenbach; Ilia V. Roisman; Olivier Rouzaud; Philippe Villedieu
Publié dans:
AIAA AVIATION 2021 FORUM, Numéro 1, 2021
Éditeur:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2021-2684
Auteurs:
Alessandro Donizetti, Andrea Rausa, Tommaso Bellosta, Barbara Re and Alberto Guardone
Publié dans:
AIAA AVIATION 2024 Forum, Numéro """AIAA 2024-2679 8-12 January 2024""", 2024
Éditeur:
American Institute of Aeronautics and Astronautics
DOI:
10.2514/6.2024-2679
Auteurs:
Denis Sotomayor-Zakharov
Publié dans:
Forschungsbericht Niedersächsisches Forschungszentrum für Luftfahrt, Numéro Bd. 2023-12 (29.01.2024), 2024
Éditeur:
Niedersächsisches Forschungszentrum für Luftfahrt
DOI:
10.24355/dbbs.084-202401191241-0
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible