Composite mould tool based on 3D printing

Informazioni relative al progetto

COMBO3D

ID dell’accordo di sovvenzione: 831851

DOI 10.3030/831851

Progetto chiuso

Data della firma CE 14 Marzo 2019

Data di avvio 1 Aprile 2019

Data di completamento 31 Marzo 2021

Finanziato da

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Costo totale € 806 140,00

Contributo UE € 806 140,00

Coordinato da

TECHNISCHE UNIVERSITAET MUENCHEN
Germany

Risultati finali

Data sets, microdata, etc (1)

D&E Strategy

The consortiums dissemination and exploitation strategy will be developed until month and a plan presented.

Open Research Data Pilot (1)

Open Research Data Report

Report of publishable research data to be published at the end of the project

Pubblicazioni

Peer reviewed articles (1)

Interlaminar strength in large‐scale additive manufacturing of slow crystallizing polyaryletherketone carbon composites

Autori: Patrick Consul, Adam Chaplin, Nevine Tagscherer, Swen Zaremba, Klaus Drechsler
Pubblicato in: Polymer International, 2020, ISSN 0959-8103
Editore: John Wiley & Sons Inc.
DOI: 10.1002/pi.6168

Non-peer reviewed articles (1)

Composite Mould Based on 3D Printing—COMBO3D

Autori: Swen Zaremba
Pubblicato in: The Project Repository Journal, Numero 11/1, 2021, Pagina/e 116-118, ISSN 2632-4067
Editore: European Dissemination Media Agency
DOI: 10.54050/prj1117715

Other (1)

3D printing CFRP molds for RTM flaperon, exoskeletons and more

Autori: GINGER GARDINER
Pubblicato in: Composites World, Numero 9/10/2020, 2020
Editore: Gardner Business Media

Conference proceedings (3)

Big Area Additive Manufacturing of a Thermoplastic Tooling for a Large Thermoset Composite Structure

Autori: Feuchtgruber, M.; Colin, D.; Zaremba, S.; Drechsler, K
Pubblicato in: SAMPE Europe Conference 2020, Numero 2020, 2021
Editore: SAMPE

Modeling thermal behaviour of cooling channels in big area additive manufactured structures

Autori: Feuchtgruber, M.; Colin, D.; Zaremba, S.; Drechsler, K.
Pubblicato in: SAMPE Europe Conference 2020, Numero 2020, 2020
Editore: Sampe

CONFORMAL TEMPERING CHANNELS IN A 3D PRINTED CORE FOR RTM TOOLING

Autori: Feuchtgruber, M.; Consul, P.; Colin, D.; Zaremba, S.
Pubblicato in: SAMPE EUROPE Conference and Exhibition 2021, Numero 2021, 2021
Editore: SAMPE