Description du projet
Innovation dans la production de nanostructures de graphène
Les nanostructures de graphène et leur temps de réponse électro-optique rapide ont permis de réaliser des changements ordre-unité au niveau de l’absorption en activant et désactivant les plasmons grâce à un mécanisme d’ouverture électrique. Ces nanostructures pourraient être utilisées dans le cadre de la modulation ultrarapide de la lumière. Malheureusement, leur utilisation dans les dispositifs optoélectroniques est limitée en raison de leur détection dans l’infrarouge moyen et de leurs longueurs d’onde plus grandes. Par exemple, le dopage du graphène à des dimensions inférieures à 5 nm n’est pas possible. Le projet atoGRAPH, financé par l’UE, entend utiliser une voie chimique ascendante pour produire des nanorubans de graphène précis de 1 nm de largeur. Ceux-ci répondront également au besoin d’atteindre une dimension inférieure à 5 nm et permettront de construire, à un stade ultérieur, des structures de graphène nanoporeuses.
Objectif
The extraordinary and ultrafast electro-optical response of graphene nanostructures has enabled order-unity changes in absorption due to the switching on and off of plasmons via electrical gating, thus suggesting application to ultrafast light modulation. Unfortunately, graphene plasmons have so far been observed at mid-infrared and longer wavelengths, therefore limiting their use as optoelectronic devices in the visible and near-infrared (vis-NIR) spectral range. Reaching this energy regime requires an efficient doping of graphene by confining the lateral dimension below 5 nm, which is beyond the state-of-art top-down lithography resolution. Alternatively, this project will use a bottom-up chemical route recently developed by the host organization to synthesize atomically precise, 1nm wide, graphene nanoribbons (GNRs) that can couple laterally to give rise to either nanoporous graphene structures or laterally interconnected GNRs arrays, for efficient gate-doping. The project aims to explore the feasibility of fabricating optoelectronic devices based on the plasmonic properties of atomically precise graphene nanostructures. The nature of the project is highly multidisciplinary, involving a combination of well-developed chemistry, physics, electronics and photonics that will focus at three different levels: chemical synthesis of atomic-size GNRs and characterization, nanostructure transfer and device fabrication, and electro-optical characterization. This proposal promotes both the transfer of knowledge to the host institution and the training of the candidate in new advanced techniques. The proof-of-concept of such device will pave the way for ultra-high speed photodetectors that are capable of handling record data transmission at vis-NIR range, thus providing key solutions for next generation data communications. This project lines up perfectly with the EU strategy, “Graphene Flagship”, in fostering the emergence of foundational breakthroughs in graphene science.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN.
- ingénierie et technologienanotechnologienanomatériauxnanostructures bidimensionnellesgraphène
- ingénierie et technologiegénie électrique, génie électronique, génie de l’informationingénierie électroniquecapteurscapteurs optiques
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Régime de financement
MSCA-IF-EF-ST - Standard EFCoordinateur
08193 Cerdanyola Del Valles
Espagne