CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.
I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .
Risultati finali
As part of task 8.1, the deliverable will report on study on targeted geothermal power technology including dry steam, single flash, double flash, back pressure turbine, spent steam bottoming binary (SSBB) system, combined (single flash cycle + a condensing turbine and + a binary cycle as a bottoming unit) cycle, hybrid (combination of a SSBB system and a BBB system).
GeoHex compliance analysis regarding HX codes & standards and recommendation (si apre in una nuova finestra)As part of task 8.4, the deliverable reports on study of TEMA (Tubular Exchanger Manufacturers Association) standards which is widely used to design and fabricate shell and tube type heat exchangers including other relevant HX codes and standards such as ASME, EN13445.
Sustainability assessment of phase change HX material (si apre in una nuova finestra)As part of task 5.4, the deliverable reports on LCA and cost model for the material developed in WP3 and WP4.
Environmental performance of GeoHex enabled HXs (si apre in una nuova finestra)As part of task 7.5 the deliverable reports on the lifecycle assessment of GeoHex enabled HXs.
Thermophysical characterisation of ORC working fluid (si apre in una nuova finestra)As part of task 1.4, the deliverable reports on the characterisation of ORC working fluid in terms of specific heat capacity, density, critical temperature, pressure, thermal conductivity, surface tension etc.
Scalability and manufacturability of phase change HX material (si apre in una nuova finestra)As part of task 5.2 the deliverable reports on scalability issues of the applied methodology of material synthesis for each of the materials develop for phase change heat transfer application.
Ideal flow boiling surface for ORC fluid (si apre in una nuova finestra)As part of task 1.2, this deliverable reports on identification of the characteristics of optimum surfaces for flow boiling heat transfer related to ORC working fluid.
Sustainability assessment of single phase HX material (si apre in una nuova finestra)As part of task 5.3, the deliverable reports on lifecycle analysis (LCA) using SimaPro LCA software through cradle to gate lifecycle approach for the material developed in WP2 including development of LCA and cost models for per meter square of heat transfer surface area for respective types of HXs based on GeoHex engineered surface.
Impact and opportunities of GeoHex on binary cycle (si apre in una nuova finestra)As part of task 8.2, the deliverable will report on study on different configuration binary cycle such as basic ORC, recuperative (or regenerative) etc. based on hydrothermal and engineered (enhanced) geothermal system (EGS).
Cost performance of GeoHex enabled HXs (si apre in una nuova finestra)As part of task 7.4, the deliverable reports on cost of GeoHex enabled HXs demonstrated in the previous tasks evaluated in €/KW (or €/m2 i.e., € per unit surface area) and compared the same for respective HXs based on SOA materials.
Analysis of HX technologies for geothermal & HXs structures (si apre in una nuova finestra)As part of task 1.1, the deliverable reports on the structure of heat exchanges that will be used to demonstrate materials improvements.
Report on the IPR management and patent filing (si apre in una nuova finestra)As part of task 9.1, the deliverable reports on the IPR strategy and management.
SOA materials for Geothermal HX and limitation (si apre in una nuova finestra)As part of task 1.1, this deliverable reports on the SOA of heat exchanger (HX) materials and its operational limitation regarding the handling of aggressive geothermal brine, HX types along with variants and using FMEA software perform heat exchanger failure analysis through failure mode effect analysis (FMEA).
Impact and opportunities of GeoHex beyond geothermal (si apre in una nuova finestra)As part of task 8.3, the deliverable reports on identification of cost and environmental performance data regarding concentrating solar plant (CSP), waste heat recovery project based on ORC, industrial heat pump, absorption chiller etc.
Ideal condensing surface for water and ORC fluid (si apre in una nuova finestra)As part of task 1.3, the deliverable reports on ideal surface for condensation of water and ORC working fluid in terms of surface morphology and chemistry.
Scalability & manufacturability of single phase HX material (si apre in una nuova finestra)As part of task 5.1, the deliverable reports on scalability issues of the applied methodology of material synthesis for each of the materials develop for single phase heat transfer application.
GeoHex opportunities in geothermal sector (si apre in una nuova finestra)As part of task 1.5, the deliverable reports on formalisation of the GeoHex opportunities within and beyond geothermal energy sector.
This deliverable announces the launch of the project website as part of task 9.3.
Pubblicazioni
Autori:
Arunima Bhuvanendran Nair Jayakumari, Nigar Gul Malik, Garima Mittal, David Martelo, Namrata Kale and Shiladitya Paul
Pubblicato in:
Coatings, 2023, ISSN 2079-6412
Editore:
MDPI
DOI:
10.3390/coatings13121988
Autori:
Garima Mittal; Nigar Gul Malik; Arunima Bhuvanendran Nair Jayakumari; David Martelo; Namrata Kale; Shiladitya Paul
Pubblicato in:
Coatings, 2023, ISSN 2079-6412
Editore:
MDPI
DOI:
10.3390/coatings13121984
Autori:
Corentin Penot; David Martelo; Shiladitya Paul
Pubblicato in:
Applied Sciences, 2023, ISSN 2076-3417
Editore:
MDPI
DOI:
10.3390/app132011549
Autori:
D.I. Snorrason, S.M. Adalsteinsson, T.K. Tryggvason, D. Dagbjartsson, A.S. Ingason, F. Magnus
Pubblicato in:
Journal of Non-Crystalline Solids: X, 2023, ISSN 2590-1591
Editore:
Elsevier B.V.
DOI:
10.1016/j.nocx.2023.100183
Autori:
M. Ahmed , A. Habib , M.M. Nawal , M.M.H. Saikot , M.A.H. Chowdhury , M.A. Hoque , A.K.M. Asaduzzaman , H. Pálsson , P. Björnsson
Pubblicato in:
Case Studies in Thermal Engineering, 2023, ISSN 2214-157X
Editore:
Elsevier BV
DOI:
10.1016/j.csite.2023.103377
Autori:
David F Martelo, Georgia Schneider, Imran Bhamji, Anna Wojdyla, Garima Mittal, Nigar Gul Malik, Arunima Bhuvanendran Nair Jayakumari,Namrata Kale, David Ingvi Snorrason, Arni Ingason, Paolo Taddei, Shiladitya Paul
Pubblicato in:
Open Reserach Europe, 2023, ISSN 2732-5121
Editore:
European Commission
DOI:
10.12688/openreseurope.16802.1
Autori:
Garima Mittal, Shiladitya Paul
Pubblicato in:
J Therm Spray Tech, 2022, ISSN 1059-9630
Editore:
ASM International
DOI:
10.1007/s11666-022-01360-w
Autori:
GeoHex consortium
Pubblicato in:
European Energy Innovation, Numero Quarterly, 2019
Editore:
Prologue Media Ltd.
Autori:
GeoHex consortium
Pubblicato in:
European Energy Innovation, Numero Quarterly, 2021
Editore:
Prologue Media Ltd.
Autori:
Garima Mittal, Francesco Fanicchia, Imran Bhamji, Shiladitya Paul
Pubblicato in:
NACE proceedings 2021, 2021
Editore:
NACE International
Autori:
Garima Mittal, Francesco Fanicchia, Imran Bhamji, Shiladitya Paul
Pubblicato in:
NACE proceedings 2021, 2021
Editore:
NACE International
È in corso la ricerca di dati su OpenAIRE...
Si è verificato un errore durante la ricerca dei dati su OpenAIRE
Nessun risultato disponibile