Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS

Thin Film Metallic Glasses for Tribological Applications

Descrizione del progetto

Nuovi rivestimenti metallici per proteggere utensili e matrici da corrosione e usura

I rivestimenti tribologici proteggono utensili, matrici e stampi dall’usura e dall’attrito. Grazie alla loro struttura amorfa, i vetri metallici a pellicola sottile hanno un’elevata resistenza e ampi limiti elastici, il che li rende adatti per una vasta gamma di applicazioni tribologiche. L’assenza di difetti fa sì che presentino un’elevata resistenza alla corrosione e all’usura. Stimolato dal loro potenziale, il progetto TriboMetGlass, finanziato dall’UE, sperimenterà il deposito di rivestimenti amorfi in vetro su substrati commerciali usando un processo di sputtering con magnetron. La loro composizione di rivestimento a base di tungsteno sarebbe stabile alle alte temperature mentre lo zirconio e il bario migliorano la capacità di creazione del vetro. Saranno condotte numerose verifiche prima che questi rivestimenti passino dal laboratorio all’industria.

Obiettivo

The current proposal aims to demonstrate the potential of thin film metallic glasses as novel tribological coating materials, used to improve the performance of tools, dies, and moulds in many different applications. These coatings are characterized by a high hardness, as well as high wear- and oxidation resistance. Thin film metallic glasses are promising materials to fulfil these demands. Due to their amorphous structure they have excellent mechanical properties such as high specific strengths and large elastic limits above 2%. The absence of defects like grain boundaries also makes them resistant against corrosion and wear. In comparison to conventional protective coatings based on transition metal nitrides, thin film metallic glasses have the added benefit of a relatively low elastic modulus, making them tougher and able to accommodate a certain degree of substrate deformation without delaminating. In this study, amorphous WZrB coatings will be deposited by a combinatorial dc magnetron sputter process from three elemental targets onto commercially relevant substrate materials. The primary refractory element W provides the necessary temperature stability for tribological applications, while Zr and B have both been shown to enhance the glass forming ability in W-based alloys. Experimental activities will be supported by our company partner CERATIZIT Austria GmbH, a global leader in the hard metal tooling industry. The thin film metallic glass/substrate systems will be characterized with state-of-the-art methods in terms of their chemical, mechanical, thermal, and tribological properties. Results will be critically evaluated regarding the up-scaling potential of developed processes and materials systems from laboratory to industrial conditions.

Campo scientifico (EuroSciVoc)

Programma(i)

Argomento(i)

Meccanismo di finanziamento

ERC-POC-LS - ERC Proof of Concept Lump Sum Pilot

Vedi tutti i progetti finanziati nell’ambito di questo schema di finanziamento

Invito a presentare proposte

(si apre in una nuova finestra) ERC-2019-PoC

Vedi tutti i progetti finanziati nell’ambito del bando

Istituzione ospitante

OESTERREICHISCHE AKADEMIE DER WISSENSCHAFTEN
Contributo netto dell'UE
€ 150 000,00
Indirizzo
DR. IGNAZ SEIPEL-PLATZ 2
1010 Wien
Austria
Regione
Ostösterreich Wien Wien
Tipo di attività
Research Organisations
Collegamenti
Costo totale
Nessun dato

Beneficiari (1)