Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

MATERIALS FOR NEXT GENERATION ALKALINE ELECTROLYZER

Description du projet

Un grand pas pour la prochaine génération d’électrolyseurs alcalins

Produit de manière adéquate, l’hydrogène peut constituer une alternative propre aux combustibles fossiles. La méthode séculaire d’électrolyse, qui consiste à séparer l’eau en hydrogène et oxygène en faisant passer de l’électricité par celle-ci, est l’un des procédés les plus prometteurs à cet égard. L’électrolyse alcaline est une alternative efficace aux autres méthodes d’électrolyse commerciales car elle n’utilise pas de métaux nobles sur les catalyseurs et les plaques bipolaires. Cependant, l’absence d’une membrane conductrice mince et efficace d’échange d’ions entraîne la formation d’une résistance interne considérable. Pour remédier à ce problème, le projet NEXTAEC, financé par l’UE, met au point une membrane de solvatation d’ions qui est non poreuse et peut donc être aussi mince qu’une membrane d’échange d’ions. L’absence de métaux nobles permettra d’appliquer cette technologie à l’échelle de plusieurs gigawatts – une condition préalable à son déploiement commercial.

Objectif

The aim of the NEXTAEC is development of next generation alkaline electrolyzer with a performance comparable to a good PEM electrolyzer or better without the use of noble metals. In brief, the PEM electrolyzer can operate at high current densities (several amperes pr. cm2) due to the low internal resitstance of a thin acidic ion conducting membrane (an ion-exchange membrane). The main drawback is that the acidic system demands noble metal catalysts on both electrodes and expensive noble metal coatings on the bipolar plates and electrode backing. The alkaline electrolyzer, does not rely on noble metals for neither catalysts nor bipolar plates, but it suffers from higher internal resistance because it does not have a thin ion conducting membrane. Despite many years of research, no research groups or companies have been able to develop a satisfactory ion-exchange membrane for the alkaline system. All attempts suffer from sigificantly lower conductivity and poor stability. The alkaline electrolyzer have so far been left with thick porous diaphragms with a significantly higher area-specific resistance, which practically limits the current density to a fraction of an ampere pr. cm2. In the proposed project, an alkaline electroyzer will be developed around a new membrane concept. The membrane is an ion-solvating membrane. It is a polymer, which dissolves the electrolyte of the electrolyzer (aqueous potasium hydroxide). Like an ion-exchange membrane it is nonporous and it can therefore, in contrast to a porous diaphragm, be as thin as an ion exchange membrane. The absense of noble metals makes it possible to roll out the technology in the multi GW scale that is needed in the green transition away from the dependence fossil fuels.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Coordinateur

DANMARKS TEKNISKE UNIVERSITET
Contribution nette de l'UE
€ 683 760,00
Adresse
ANKER ENGELUNDS VEJ 101
2800 Kongens Lyngby
Danemark

Voir sur la carte

Région
Danmark Hovedstaden Københavns omegn
Type d’activité
Higher or Secondary Education Establishments
Liens
Coût total
€ 685 000,00

Participants (10)