The first wireless wind turbine blade sensor for automatic, real-time condition-based monitoring

Informazioni relative al progetto

EOLOGIX

ID dell’accordo di sovvenzione: 874102

DOI

10.3030/874102

Progetto chiuso

Data della firma CE 28 Agosto 2019

Data di avvio 1 Settembre 2019

Data di completamento 31 Agosto 2021

Finanziato da

• INDUSTRIAL LEADERSHIP - Innovation In SMEs

Costo totale

€ 1 619 825,00

Contributo UE

€ 1 133 877,50

Coordinato da

EOLOGIX SENSOR TECHNOLOGY FLEXCO
Austria

Periodic Reporting for period 2 - EOLOGIX (The first wireless wind turbine blade sensor for automatic, real-time condition-based monitoring)

Periodo di rendicontazione: 2020-09-01 al 2021-08-31

Sintesi del contesto e degli obiettivi generali del progetto

Maintenance costs are one of the largest problems in the wind energy market, adding to up to 40% of total wind turbine costs. Blades take the lion’s share of this, with 20-30% of all maintenance costs.
Our solution is an on-blade sensor system to combine 3 features: blade crack detection, pitch angle measurements and blade icing detection. Monitoring all these features will save wind turbine owners up to €2.9 M across the turbine lifetime.
Generating more green energy from both new and retrofitted wind turbines, thus reducing the emission of greenhouse gases and reducing other pollution from conventional energy production is the main benefit for society from our product. Also, smaller maintenance (i.e. earlier detection of small defects) can reduce the environmental impact e.g. in comparison to the exchange of an entire blade set after a major damage. Within the course of the project, eologix has successfully entered the path and made the first significant steps from the supplier of a single product to a complete solution provider.

Lavoro eseguito dall’inizio del progetto fino alla fine del periodo coperto dalla relazione e principali risultati finora ottenuti

Since the beginning of the project, eologix has integrated new components into the main platform component, the "sensor" which is mounted to the blade surface at various locations. Firmwarehas been developed for sensor, receiver and base station. AI algorithms have been implemented and evaluated. Case studies and beta versions have been installed and evaluated together with our partners. Certification of the new platform as a condition monitoring system has been done. A new dashboard has been implemented to give our customers access to the test results. Various methods of dissemination have been used to let the market know about the new solution available.

Progressi oltre lo stato dell’arte e potenziale impatto previsto (incluso l’impatto socioeconomico e le implicazioni sociali più ampie del progetto fino ad ora)

First systems are sold to end customers. eologix:align provides the first on-line condition monitoring system of pitch misalignment independent from turbine data, thus suited for any kind of wind turbine. Synchronized inertial measurements at any point of the blade surface will even allow for more applications in production optimization than assumed before. The results from eolACC will lead to a comprehensive blade monitoring solution for any kind of detectable damage in a rotor blade by means of a single sensor system, thus being cost-effective as such but also due to avoiding damages which limit the lifetime of the turbine or cause avoidable O&M downtimes and costs.

sensors-min.jpg