PERiscopic COnsumer Stereo DEpth CAMera (PERCOSDECAM)

Información del proyecto

PERCOSDECAM

Identificador del acuerdo de subvención: 878873

DOI

10.3030/878873

Proyecto cerrado

Fecha de la firma de la CE 12 Marzo 2020

Fecha de inicio 1 Marzo 2020

Fecha de finalización 28 Febrero 2023

Financiado con arreglo a

• Horizon 2020 Framework Programme

Coste total

€ 4 069 875,00

Aportación de la UE

€ 2 848 912,51

Coordinado por

PHOTONIC SENSORS AND ALGORITHMS SL
Spain

Periodic Reporting for period 6 - PERCOSDECAM (PERiscopic COnsumer Stereo DEpth CAMera (PERCOSDECAM))

Período documentado: 2022-09-01 hasta 2023-02-28

Resumen del contexto y de los objetivos generales del proyecto

The main objective of this project was to develop the most disruptive cameras for AR, MR, VR and depth estimation applications for mobile phones, tablets and laptop computers: specifically, an embedded camera module, a highly competitive device aiming towards disruptive market-shares and global leadership.

At the moment of writing this report a camera derived from this project is being sold to a manufacturer of ANDROID tablets and several industrial applications, and we plan to promote it to additional customers (including in Fairs like the CES, the MWC, SPIE-XR,...).

These devices offer much better performance than Structured Light [SL] cameras, LIDARs and TOF [Time of Flight] cameras, as they increase drastically the resolution of the depth map (from 40 Kpixels to 1,45 Mpixels), consuming 7 times less power than the second closest competitor.

Additionally, the costs of the BOM (Bill of Material) for the camera is reduced by more than 50% and provides realtime-3Dvideo and depth maps (vs. a few frames/second of competitors) running under the Snapdragons XR2 and 888 from QUALCOMM.

It reduces the overall size of the device by more than 50%, the power dissipation is ten times lower, enabling to have as a result a more robust camera with enhanced functionalities and longer battery life.

We aim to disrupt into established value-chains of products including the aforementioned type of camera (mobile telephony, tablets and laptops), making camera module manufacturing competitive in Europe (due to the automation introduced by the alignment solution developed in this project)

Trabajo realizado desde el comienzo del proyecto hasta el final del período abarcado por el informe y los principales resultados hasta la fecha

The work performed during the project was focused on developing the most competitive cameras for AR, MR, VR and depth estimation applications for mobile phones, tablets and laptop computers. Given the traction these devices have had during the last years, and the boost of remote communications as a consequence of the COVID-19 pandemic we have great future expectations for the results of the project.

We demonstrated design and manufacturing feasibility, obtained the first set of prototypes and we launched volume production.

Several cameras with different optics and target markets (consumer and industrial applications) have been prototyped.

Avances que van más allá del estado de la técnica e impacto potencial esperado (incluida la repercusión socioeconómica y las implicaciones sociales más amplias del proyecto hasta la fecha)

The cameras fomr this poject are well beyond the state-of-the-art.

Our strongest competitive advantages are: cost (well below any competitor), power consumption (dividing by 10 the power used by second competitor), lateral resolution (1.4 vs. 0.04 Mpixels)

Camera module for industrial applications.

Module for smartphines, tablets and laptos.

Evaluation Kit for customers. USB-version.

Module for industrial applications.