PERiscopic COnsumer Stereo DEpth CAMera (PERCOSDECAM)

Informations projet

PERCOSDECAM

N° de convention de subvention: 878873

DOI

10.3030/878873

Projet clôturé

Date de signature de la CE 12 Mars 2020

Date de début 1 Mars 2020

Date de fin 28 Février 2023

Financé au titre de

• Horizon 2020 Framework Programme

Coût total

€ 4 069 875,00

Contribution de l’UE

€ 2 848 912,51

Coordonné par

PHOTONIC SENSORS AND ALGORITHMS SL
Spain

Periodic Reporting for period 6 - PERCOSDECAM (PERiscopic COnsumer Stereo DEpth CAMera (PERCOSDECAM))

Période du rapport: 2022-09-01 au 2023-02-28

Résumé du contexte et des objectifs généraux du projet

The main objective of this project was to develop the most disruptive cameras for AR, MR, VR and depth estimation applications for mobile phones, tablets and laptop computers: specifically, an embedded camera module, a highly competitive device aiming towards disruptive market-shares and global leadership.

At the moment of writing this report a camera derived from this project is being sold to a manufacturer of ANDROID tablets and several industrial applications, and we plan to promote it to additional customers (including in Fairs like the CES, the MWC, SPIE-XR,...).

These devices offer much better performance than Structured Light [SL] cameras, LIDARs and TOF [Time of Flight] cameras, as they increase drastically the resolution of the depth map (from 40 Kpixels to 1,45 Mpixels), consuming 7 times less power than the second closest competitor.

Additionally, the costs of the BOM (Bill of Material) for the camera is reduced by more than 50% and provides realtime-3Dvideo and depth maps (vs. a few frames/second of competitors) running under the Snapdragons XR2 and 888 from QUALCOMM.

It reduces the overall size of the device by more than 50%, the power dissipation is ten times lower, enabling to have as a result a more robust camera with enhanced functionalities and longer battery life.

We aim to disrupt into established value-chains of products including the aforementioned type of camera (mobile telephony, tablets and laptops), making camera module manufacturing competitive in Europe (due to the automation introduced by the alignment solution developed in this project)

Travail effectué depuis le début du projet jusqu’à la fin de la période considérée dans le rapport et principaux résultats atteints jusqu’à présent

The work performed during the project was focused on developing the most competitive cameras for AR, MR, VR and depth estimation applications for mobile phones, tablets and laptop computers. Given the traction these devices have had during the last years, and the boost of remote communications as a consequence of the COVID-19 pandemic we have great future expectations for the results of the project.

We demonstrated design and manufacturing feasibility, obtained the first set of prototypes and we launched volume production.

Several cameras with different optics and target markets (consumer and industrial applications) have been prototyped.

Progrès au-delà de l’état des connaissances et impact potentiel prévu (y compris l’impact socio-économique et les conséquences sociétales plus larges du projet jusqu’à présent)

The cameras fomr this poject are well beyond the state-of-the-art.

Our strongest competitive advantages are: cost (well below any competitor), power consumption (dividing by 10 the power used by second competitor), lateral resolution (1.4 vs. 0.04 Mpixels)

Camera module for industrial applications.

Module for smartphines, tablets and laptos.

Evaluation Kit for customers. USB-version.

Module for industrial applications.